|
|
|
With the T80-Leopard system you radio control electric hoists. The transmitter has 10 x 2 functions and can control 2 receivers. The receiver has 6 functional relays and 2 safety relays.
|
|
|
With the 860-Lion system you can radio control cranes, overhead cranes, electric hoists, lift tables, etc. The transmitter is available in 3 different versions with 4 x 2 + 2 x 1, 20 (10 x 2) and 24 (12 x 2) functions. Depending on your needs and what your application requires, you can get the receiver with 10, 15 or 24 functional relays.
|
|
Tiger is a system with duplex for radio remote controlling of cranes and other hoisting applications. Tiger has duplex, CANopen and Modbus abilities. Together with your application it can communicate with an external unit, e.g. a weight sensor. Both the system's stop function and two relays in the receivers are approved in accordance with SIL3 IEC 61508. The Tiger transmits on 433-434 MHz with 69 channels available for selection within the frequencies. Its software can be modified. Tiger is certified in accordance with CSA .
The handheld transmitters are available with 10x2 functions and a display, or 12x2 without a display. The receivers are available with 12 (with or without CANopen) or 28 function relays.
|
|
|
Control Chief's TK6 transmitter is designed to use a narrow band radio frequency. The The TK6 transmitter is capable of communicating with either our Command Chief® or 8400 Series receivers. A site license as defined by local regulations may be required. The operating range is approximately 900 ft. TK6 transmitters are available in various configurations.
|
|
|
|
|
|
RANGER Crane Retrofit System
RANGER Overview
Kar-Tech's RANGER crane retrofit system is a easy-to-install package that boosts safety and productivity by bringing wireless control to manually operated cranes. The system is built around linear actuators that mount to the valve handles, as well as all electronics needed to drive them, a PACKER series radio transmitter, and a VC-93 radio receiver, along with all mounting hardware and a premade wiring harness. The illustrated step-by-step installation manual makes the initial setup a breeze. Paddle-style joysticks enable the operator to feather the controls as smoothly as manual controls. Kar-Tech's best-in-class radio provides 1000' of operating range, with all the protection of two-way communication and ID-coded 900MHz FHSS transmissions. An Emergency Stop switch and enable buttons enhance security even further. The whole system is sealed tight against the environment - made for the way you work. Alternate paddle/switch configurations are available on request
At A Glance:
- Long-range operation: 33mW of output power combined with a super-sensitive receiver provides up to 1000 feet of range
- Easy Installation: Illustrated manual with engineering drawings and photos walk you step-by-step thru install.
- Built To Last: Receiver sealed to IP-67, all sealed switches, joysticks on transmitter.
- Smooth Operator: Fully-proportional controls allow you to feather crane movements as well as with the valve handles.
|
|
| ... products without technical information |
| |
|
|
|
|
Innovation and rugged engineering give the T34C a unique shape and style that provide the equipment operator with a controller that is extremely durable, convenient, and easy to operate. This extremely lightweight ‘Belly Box’ style controller is ideal for indoor (and limited outdoor) crane remote control applications in most industrial environments. The T34C can be used with most Cattron licensed AT Series or MP Series receiver/decoder units as well as most existing systems as either a replacement or spare controller. One of the more distinctive features of the T34C is the unique design of its control levers. Machined from aircraft-quality 6061 billet aluminum, the handle for each lever is a different geometric shape making it easier for the operator to distinguish between control levers without looking down. T34C controllers have room for up to six control levers and can be customized with additional pushbuttons and toggle switches. The T34C also uses readily available standard AA alkaline or NiMh rechargeable batteries.
|
|
Vehicles in this category are required to meet demands that are often contradictory:
From lengthy high-speed road journeys to operations on undeveloped land, without compromising on safety.
For these very particular uses, MICHELIN has developed a range of tires capable of handling any situation,
from motorway travelling to operations in desert regions, and from winter conditions to muddy terrain.
|
|
|
With the hot-vulcanized retreads for construction vehicle tyres, Rodos provides tyre expertise for standard sizes up to 33" as well for as smaller speciality tyres. Again, quality is also a top priority here. Just as is the case with Schelkmann, Rodos offers application-specific compounds combined with intelligent profiles for optimum tyre solutions. For all Rösler products, it is always the balance of performance, reliability and price that takes centre stage.
|
|
The new radial tyres from Winstone are a logical consequence of Rösler’s retread expertise. Not all carcasses used meet our quality standards. Winstone falls back on new carcasses which are purchased with the highest quality standards applied by European brand manufacturers. Our retread expertise is then applied to the finishing process. Rösler stands for: quality, value for money tyres.
Winstone radial tyres are produced in the sizes 15.5 R25 to 26.5 R25 for various profiles.
|
|
|
|
|
|
Welcome to Spohn + Burkhardt
Our Products
Our production program includes a diverse range of controllers, control stations, resistors, starters, in addition to a broad spectrum of controls for all types of transport machinery, construction and shipping cranes.
Our comprehensive series production is customisable in many different ways according to specific needs.
Our Company
The firm was founded in 1920 by Karl Spohn and David Burkhardt and remains in family ownership.
Our highly motivated team strives to achieve maximum customer satisfaction starting with the first contact through to after-sales service.
Our recipe for success has remained consistent over the years – and effective:
flexibility in product development and reliability in production.
Quality standards
A high quality standard – and therefore the complete satisfaction of our clients is one of our most important aims.
This is confirmed by various certifications, e.g. DIN EN ISO 9001-2000, CCC as well as by national and international standards, IEC 947, EN 60947, CSA and UL
|
|
|
|
|
|
Welcome to Spohn + Burkhardt
Our Products
Our production program includes a diverse range of controllers, control stations, resistors, starters, in addition to a broad spectrum of controls for all types of transport machinery, construction and shipping cranes.
Our comprehensive series production is customisable in many different ways according to specific needs.
Our Company
The firm was founded in 1920 by Karl Spohn and David Burkhardt and remains in family ownership.
Our highly motivated team strives to achieve maximum customer satisfaction starting with the first contact through to after-sales service.
Our recipe for success has remained consistent over the years – and effective:
flexibility in product development and reliability in production.
Quality standards
A high quality standard – and therefore the complete satisfaction of our clients is one of our most important aims.
This is confirmed by various certifications, e.g. DIN EN ISO 9001-2000, CCC as well as by national and international standards, IEC 947, EN 60947, CSA and UL
|
|
| ... products without technical information |
| |
|
The reach of the Flex and UltraFlex extraction arms is considerably increased through the use of a Euromate extension crane (length 2 or 4 metres). The extension cranes are supplied with the HandyStop locking system, which will quickly lock the horizontal movement of the crane in a previously selected position.
|
|
|
|
|
|
The suction arms are available in a wide variety of designs.
We differentiate between pipetype and hosetype as well as internal and external joints. As they come with a spring support, all of the arms are self-supporting in the set position.
The exhaust ventilation hood is equipped with a throttle valve that enables the flow rate to be set individually. For lengths of 5 m and more, the arm is supplied with an additional wall-mounted boom of 2 or rather 4 m length. This is equipped with a C-beam for attaching a mechanical wire box or tools.
The suction arms with external joints are equipped with a solid parallelogram frame. Two hydraulic attenuators guarantee a facile flexibility and an accurate positioning of the suction arm.
The suction arms are supplied with a wall bracket and a connection pipe of Ø 160 mm. They can be used for the connection to individual fans as well as to central suction systems.
The optional available adapter for the hood guarantees a more effective collection of the dusts.
|
|
Self-propelled industrial cranes are adaptable, flexible, quiet and sufficiently compact to pass through most factory corridors, but sturdy enough to be used in grueling sectors such as mining, quarrying, steel processing and aircraft assembly.
On these machines, Brevini Winches hydraulic winches offer high performance and compact dimensions. All winches have hydraulic motor-driven units with a fixed cylinder axial piston motor and a balancing valve unit for controlling the load when descending and a selector valve for opening the integrated motor brake. As a result, the rope can be easily and quickly wound clockwise or counterclockwise simply by rotating the load control valve. Installation is simplified by the exclusive design of the lateral supports in the square frame versions.
|
|
... see all the products in the category
Winches
|
|
|
|
|
Storage and retrieval of heavy, bulky items has never been easier! With the Stanley® Vidmar® STAK System®, one operator can efficiently manage loads weighing up to 4,000 lbs.—all in less than 250 square feet.
Based on a system of removable, adjustable pallets (instead of fixed shelves) and a captive lifting and handling device, the STAK System® helps maximize storage density by minimizing the vertical space requirements of each stored load. Each stored load has its own special location, so you can store or retrieve it in less than 2-1/2 minutes—regardless of its size, shape, or weight!
Captive lifting and handling device that saves space, saves time, and boosts productivity
Ideal for work-in-process, maintenance, motor storage applications and tire storage
STAK System® rises 16 feet above the ground but has a small overall footprint, maximizing vertical space, saving valuable floor space, and getting large items off the floor
Aisle space requirements are narrower than those required by using a conventional forklift
Handling device maneuvers on four axes, creating total 360 degree flexibility
STAK System® can be easily expanded as your needs grow
Specific 2,000 or 4,000 pound systems
|
|
|
|
|
|
Block Loading Grabs – with Adjustable Height AKZ-H unigrip / AKZ-N unigrip / AKZ-S unigrip
This has the same design and characteristics like the AKZ-unigrip but comes with adjustable height for differing pack heights. This universal type of grab is suitable for the transport of building materials of all types and sizes. By the adjustable height and the large opening width it can be used for all building materials on pallets and without pallets.
A choice of various heights.
The vertical height adjustment bar is equiped with 4 drillings which are situated on different height levels, each shifted by 90°.
The different levels are for the following heights:
level 1 (turning 0°) 1.100 mm
level 2 (turning 90°) 1.280 mm
level 3 (turning 180°) 1.470 mm
level 4 (turning 270°) 1.650 mm
Height Adjustment with a choice of fixed or floating position.
Now even more simple handling of the height adjustment - just move one lever.
Higher pressure – finely adjustable, for example to grip material which is sensitive against pressure.
Low overall height of equipment.
Standard Specifications:
Hydraulically and smoothly operable and works in parallel.
Robust gear rack balance for the absolute synchronous running of the hydraulic cylinders.
Large low-maintenance polyamide sliding guides with 5-year guarantee.
Automatic pressure control. Carrying capacity of height-adjustable versions in retracted position will be increased as per positive working automatic pressure control up to the respective figure indicated in brackets.
Manually adjustable pressure-reducing valve.
Oil pressure gauge.
4 hanging eyes for cables or straps/belts.
Light-weight construction in high-tensile steel.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Your overhead equipment is too valuable to your operation to take chances. LCAS will protect cranes and hoists from contact with other equipment or end walls, both indoors and out.
Using Retroreflective Class 1 Laser technology, the LCAS's simple push-button set up permits you to program your system to activate the Alarm output and Stop functions at exactly the distance you require. With a range of 50 meters (164 feet), the LCAS can discriminate distance changes to a resolution of 3 mm (0.12 inches).
LCAS protects stationary equipment, too. Its warning Alarm output will be activated if the unit detects a target moving within its set warning distance. That gives your operators time to take corrective action before a costly collision occurs.
|
|
 see the results for the following category : Hoists |
|
|
