|
|
Control, display and regulation devices are assembled in a clear layout in 8146 series control stations. The number of units fitted depends on the control station size and the space required to fit each device. It is not possible to standardize this.
Explosion protection to CENELEC, IEC
Can be used in Zone 1 and Zone 2, Zone 21 and Zone 22
Enclosure in glass fibre reinforced polyester resin, in galvanized sheet steel or stainless steel
Different enclosure sizes
Different enclosure heights
Can be combined to larger units
Equipped with built-in units for snap-in fitting (control units, indicating lamps, illuminated buttons, control switches, ammeters, voltmeters
Different options (Flanges, Cover hinges, Flanges enclosure, Brass plates for metal cable entries)
|
|
|
The THOR M8 transmitter is equipped with up to 8 single-axis joysticks and is specifically designed for machines moved by proportional electro-hydraulic valve banks such as, 7-8 functions hydraulic cranes, crawler lifting machines and other special machines. In addition to the 8 single axis joysticks, the very wide THOR console has room for several on/off and proportional commands making it an easy to customise the system for complex DC powered applications.
|
|
|
To satisfy all the functions normally required by a numerical control, OSAI have introduced a new operator console that can be connected to the CNC either through the new OS-WIRE proprietry bus, or the standard CANOpen interface. With the combination of WinMedia + operator console we offer an imaginative and innovative example of a numerical control “front end”. As well as the ability to customise the existing pushbuttons, in the electronic interface with standard components, the flexibility of configuration to suit the entire operator interface for most types of application is guaranteed.
|
|
Portable Transmitter Console RC7
RADIO REMOTE-CONTROL FOR INDUSTRIAL EQUIPMENTS, CRANES, HANDLING MACHINES, CABINS,…
Light, compact and ultra-tough case.
Up to 30 ON/OFF and/or 7 proportional channels.
Plug-in Lithium battery (long lasting, 4 h charge).
Personalized controls and control panel.
TRANSMISSION:
European ISM band, license-free use, radiated power 16h in continuous use, recharge: 80% in 2h, 100% in 4h.
Charger: power supply 12/24Vdc or 110/230Vac, cord 1.2m.
Ambient temperature during charge: +5 to +50°C.
Signaling on charger: 1 Led = power supply, 1 Led = battery charge level (fixed during charge from 0 to 80%, flashing from 80 to 100%, unlit: battery charged).
MECHANICALS:
Elastomer-filled polyamide case measuring: 160 x 240 x 150mm, weight: 1.6Kg.
Nylon strap.
|
|
|
The intelligent teach pendant (ITP) is a portable console unit that can be connected to the 10 Series CNC system to so that the operator can input and output typical system commands. The ITP is also available with a mushroom emergency stop pushbutton and a “live man” switch to ensure safety when in use.
|
|
| ... products without technical information |
| |
|
|
|
|
OPTISPARK is the integrated control system developed in cooperation with Cannon AUTOMATA. It consists of two sections: an integrated control system and the user panel (Human Machine Interface).
The integrated control system performs many functions usually carried out by several components such as steam pressure, water level, alarm data acquisition, and it sees to thermal efficiency with the aid of the most advanced control systems: combustion control through electronic cams, control of the oxygen trim, of the flue gas re-circulation and of the air fan by means of an inverter.
The H.M.I. features are: synoptic screens with multi-language
texts; high-resolution colour touch screen display; real-time and historical tracking of selected process trends; alarm reports log; navigator system; multilanguage editor.
OPTISPARK connects to the modern communications systems: it sends SMS and e-mail in case of alarms event; it is displayed on both the Intranet and the Internet; it connects to supervision systems via OPC server.
OPTISPARK's main benefits are: the performance equivalent to the most advanced DCS systems at a lower cost, the optimised combustion, the reduction of environmental impact, of fuel and energy consumption, and of the time for starting and checking the boiler.
|
|
|
|
|
|
The world’s smallest controller with a built-in touch screen, I/O and networking, plus removable mass data storage.
Built on the highly successful XLe chassis and feature set, the XLt is equipped with a larger, high-resolution resistive touch screen. Its advanced transflective readable display means the XLt is ideally suited both for indoor AND outdoor use even in direct sunlight!
Supported by the latest CScape 8.6 software there are four models available featuring flexible levels of I/O. The XLt duplicates the extensive communications options of the XLe - which currently boasts support for Ethernet, PSTN Telephone modem, GPS receiver and GSM/GPRS Modem technology.
-160x128 pixel graphical display, with a high-resolution resistive touch screen for detailed user interface
-Four programmable function keys plus system button
-Philips ARM7 Core with 1.2 ms/k scan time
-256 kB internal memory with up to 2GB MicroSDT mass-memory storage
-Two RS232/485 Serial Ports as standard
-CsCAN standard
-Add-on Ethernet, GSM/GPRS, PSTN Modem, even a GPS receiver
-Designed for IP65/NEMA 4X environment; panel or DIN-rail mountable (1/4 DIN Package 96x96mm)
-XLt supports a wide temperature range (0 to 60°C)
-9 - 30 VDC supply range
-Available in Grey/Black&Blue or with Custom colours
~ Cscape™: All Units are programmable with a Free Software ~
|
|
|
|
|
|
Vision130™ Connects!
PLC, HMI & onboard I/Os plus ETHERNET, SMS/GPRS, CANopen, MODBUS...
The Vision130™ is a palm-sized PLC with a built-in Operator Panel. The panel offers a graphic display screen and keypad. This small, powerful device supports up to 166 I/Os (onboard plus expansion modules). A rich range of embedded features include multiple auto-tuned PID loops, internal 120K structured database, loadcell support, and communication options such as Ethernet, GSM/SMS, MODBUS, CANbus, function blocks that enable Vision to communicate with devices using proprietary COM protocols, plus remote access and data export software utilities.
The Graphic HMI display screen can show images, text, and graphs according to real-time parameters. It can also display graphs based on historical values, to reflect trends of recorded data. Vision130™ supports up to 1024 user-designed screens, and up to 500 images per application.
The Vision130™ is unique: it enables engineers and systems designers to benefit from a powerful PLC and a graphic HMI – within a bare minimum of budget, cabinet space, and wiring.
Our PLC/HMI integrated devices:
save our customers’ programming time, wiring, and cabinet space.
cut budget by reducing requirements for additional hardware
prevent you from wasting time setting up Panel-PLC communication
|
|
|
|
|
|
The XL6 All-in-One controller with a built-in 32,000 colour TFT touch screen, I/O-Modules, networking options, removable MicroSDTM Card and USB ports. It’s programmable by Horner APG’s industry recognised CscapeTM software and can control a wide range of different processes and machines from small to medium applications.
-Touch-based screen
(1/4 VGA), 32,000 colour touch screen with Screen Operating Temperature from -10 to +60 degrees centigrade.
-Programmable hard keys
5 fully programmable function keys plus system key for easy diagnostics
-Capable controller
256KB Logic Space, Screen Update Speed is Adjustable with Logic Scan upto 0.2mSec/K logic.
-Single Programming Software
One software for logic and screen development. IEC61131 Compliant
-Wide Range Power Supply
Suitable for Mobile and Industrial Applications.
-Integrated I/O
4 different combination of built-in I/O available with Colour Coded Connectors
-2 serial ports
Connect to a choice of many serial protocols for PLC, Drives and other devices or our Serial I/O System
-CANOpen port
For connecting with other devices, OCS products or remote CsCAN I/O’s to expand system capabilities
-USB Transfer
New data transfer available with XL6.
~ Cscape™: All Units are programmable with a Free Software ~
|
|
|
|
|
|
Jazz™ PLC HMI:
Much more than a "smart relay"
The new Jazz™ by Unitronics is a PLC that includes on-board I/Os plus a full-function Operator Panel with numeric keypad. It enables users to replace the "smart relays" with a smarter, more powerful device, while keeping the same low budget.Jazz's™ PLC capabilities include 24K (virtual) of Ladder programming, functions such as math, store/load, compare, interrupt and loops.
The Jazz's™ fully-functioning HMI provides 60 user-designed screens, an alpha-numeric keypad and a multi-lingual display. The HMI helps our customers boost productivity by displaying operating instructions, system-fault messages and conditional data.
Jazz™ features a variety of communication options, including SMS messaging, Remote Access utilities, and PC access via MODBUS or OPC/DDE servers.
This unique combination of features, along with the Jazz's™ remarkably low price make it perfect for any application- from simple electric boards to complex production lines. Its High-speed inputs, combined with remote communication options make it the right choice for water and agriculture applications. Industrial lighting, automatic barriers/doors and air conditioning can also be easily and economically controlled by the Jazz™.
|
|
OCSXL Series - Programmable Logic Controller and Operater Interface
Quality Graphics Display for Better Process Visualisation and Machine Indication
More Compact and Affordable than Separate PLC and Operator Interface
Built-In I/O with Removable Terminal Blocks for Easy Wiring
Removable Mass Data Storage Memory Card - Supports Data Logging
|
|
AGP3000 Series, Touch PLCs : display, operation and control functions : the "all in one" range.
- 15 models of touch PLCs, 5 screen sizes (5.7inch/7.5inch/10.4inch/12.1inch/15inch).
- TFT colour screens (65536 colours) or STN (4096 colours), B&W.
- DIO type (6 inputs and 2 outputs) or CAN open Network (512 bit I/O ) or Flex Netwotk type (512 bit I/O ).
- Interfaces : Ethernet, USB, CF-card, serial Interfaces , very powerful CPU.
- Every protocol available on the AGP series can be integrated into the LADDER (Modbus, Untitelway, MPI, Sysmac, Profibus...).
|
|
|
|
|
|
OCS (Operator Control Station) is a robust, reliable control product that combines a traditional controller…programmed by any of the IEC 61131 programming languages…operator interface, I/O and networking into an integrated, all-in-one unit using a single software package - Cscape. The LX models have a fast 0.20mS/K typical scan rate, and a large memory capacity…supporting logic programs up to 128K logic and 32K of battery-backed registers
Using STN LCD technology, the LX models offer integrated, bright displays. The LX280 screen features eight shades of grey, while the LX300 supports 16 different colours. Both models provide far more visual readability than competing low-cost blue screen and STN colour LCDs. Plus, the LX280 and LX300 are compact, measuring 181mm wide x 139mm high and 45mm deep. This gives the added advantage of being a viable, low-cost solution for machines with small panel areas
-Single high performance processor, provides fast scan cycles. Note that scan cycle time is dependent on screen update priority which can be adjusted.
-320x240 ¼VGA 5.7" STN screen
-Five configurable function keys and touchscreen capability
-8 shades of grey or 16 colours
-Two serial ports plus optional CsCAN port.
-Supports SmartStack I/O using RCS or SmartStix I/O may be mounted up to 6000 ft (1500 meters) from the OCS
Fully compatible with Cscape 6.5 (or later) software that configures all control, I/O graphics and networking.
~Cscape™: All Units are programmable with a Free Software~
|
|
|
|
|
|
The Colour Touch range integrates a screen, PLC, Network and I/O into an "All in One" product.
Instead of using separate components (PLC, HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
8”, 10” and 12” SVGA touch screens with function keys
Due to its on-board fieldbus and Ethernet and the support for three independent serial protocols, the QX can operate as an ideal gateway between the shop-floor and your enterprise systems. The integrated CompactFlash slot facilitates easy application upgrades while also extending your storage capabilities for recipes’ data and process data logging. Furthermore, it can be utilised to store your web pages and graphics provided the built-in web-server has been activated.
The optional VIM400 video input card offers the ability to monitor 4 external video sources and capture images from within the control program. This additional capability is ideal for alarm monitoring within your application. The captured images can be easily stored on CompactFlash and retrieved later via the integrated web-server.
Our modules include the following features :-
- Screens ranging in size from 5.7" to 12.1".
- 1/4 VGA, VGA and SVGA formats
- Configurable function keys.
- High speed Screen Update and Logic Scan.
- Integrated Ethernet and Compact Flash options.
- All programmed by a single IEC61131 compliant software package - Cscape.
- Vast range of I/O Modules.
- Low cost Fibre Optic I/O Base available.
- 3 Serial Ports.
- Fieldbus Modules available.
~ Cscape™: All Units are programmable with a Free Software ~
|
|
|
|
|
|
Compact :
It is a compact, palm sized controller in
W130_H104_D70.5mm (main body only)
that efficiently utilises your workspace.
In addition, it is equipped with a 3.8 inch
LED to display graphical data as well as messages.
As this unit displays in two colours, amber and red, it can be utilised as an alarm, etc.
All-in-One :
This is a hybrid cost performance machine. Display,
operation and control functions are integrated into 1 unit that saves wiring and space
and also reduces the number of electric parts to connect with.
Multiple:
Equipped with 12-point DC inputs and 6-point transistor outputs,
it is compatible with special I/O.*
With acceleration and deceleration pulse output at a maximum of 65 kHz
and high-speed counter function performing at 100kHz as standard,
it has achieved sophisticated control functions. (*Possible to use 4-points at maximum).
Scalability :
With the EX module I/F, 2 sets of 13 types of EX modules can be added on.
That enables a high degree of customisation, more than 100 combinations,
for a diversity of needs and future expansions.
|
|
|
|
|
|
This lot of technology contains, in only 325 cm2, the capacity to manage coloured LCD displays with touch screen with dimensions between 7" and 15", matrix keyboards up to 60 keys, over 70 digital and analog I/O "on board", 4 incremental encoder, up to 2 CANopen ports and serial ports RS232 / RS485.
With the availability of USB port, it's possible to connect to the controller a mouse, a keyboard or practical memory keys accessible through File System with FAT 32 bit. Ethernet connection, on wired nets or wireless, it's made using standard protocols TCP/IP, FTP or EtherCAT; thanks to the availability of functions like OPC Server and WEB Server the controller can exchange data and information with any Windows application and it can be supervised from any place in the world connected to internet.
The possibility to manage up to 4 axis (3 interpolated) linked to low consumption and the availability of functions to execute astronomic pointing allow the use, besides usual photovoltaic biaxial plants, also in concentrated solar plants which require high precision in tracking.
This product is suitable to be customized thanks to its reduced dimensions, low consumption, wide 7" display, possibility to connect to wireless nets ZigBee, Wi-Fi or Bluetooth which allows you to realize portable devices to apply in energetic sectors, electro medical, in tracing job orders, data acquisition and production supervision.
|
|
|
|
|
|
Color me Beautiful! Vision350™ is the smallest PLC with an embedded COLOR touchpanel
This palm-size PLC offers exceptional capabilities and diverse I/O options. Its 3.5” TFT touchscreen can show over 1000 displays, with 3.5MB for images & fonts. The Vision350™ supports up to 166 I/Os via on-board and I/O expansion modules.
The Vision350™ offers a rich range of embedded features such as multiple auto-tuned PID loops, and internal 120K database for datalogging and recipe programming. Communication options include TCP/IP Ethernet, GSM/SMS, MODBUS and CANopen networking plus remote access for data acquisition and program download.
1MB Ladder code application memory (plus 3MB for images and 512K for fonts) enable the Vision350™ to run complex control and automation tasks.
The 256-color touchscreen HMI enables the display of color-coded operator instructions and red, attention-grabbing alarm screens. It can also display graphs according to historical values—to reflect trends of recorded data. Display options are almost endless with more than 1000 user-designed screens, and up to 250 images per application.
The Vision PLC/Graphic HMI series introduces an unbeatable price-performance ratio, enabling users to enjoy the advanced features of both the operator panel and the PLC, while maintaining low budget, reduced programming time and minimum wiring.
|
|
The software integrated development environment for drive-integrated PLCs. The 9300 Servo PLC and Drive PLC are both programmed by means of the Drive PLC Developer Studio (DDS) software integrated development environment. There are five different editors for use in conjunction with the IEC 61131-3 programming languages as well as an extremely powerful CFC editor. The built-in visualisation feature enables straightforward display of processes so that all the important information is available at a glance during commissioning.
|
|
Control Terminal CT200 series
* Display: 5.7" QVGA / 5.7" VGA, color-TFT, opt. Touch-Screen
* Processor: AMD Geode LX800, 500 MHz
* Operating memory: 256 / 512 MB
* Compact flash: ≥ 512 MB
* Operating system: VxWorks®
* Interfaces: Ethernet, USB, RS232/422/485, CAN
* Visualization: M-JVIS Designer, Java programming
Control Terminal CT300 series
* Display: 6.4" VGA / 10.4" VGA, color-TFT, opt. Touch-Screen
* Processor: AMD Geode LX800, 500 MHz
* Operating memory: 256 / 512 MB
* Compact flash: ≥512 MB
* Operating system: VxWorks®
* Interfaces: PS/2, Ethernet, USB, RS232/422/485, CAN
* Visualization: M-JVIS Designer, Java programming
|
|
|
Programmable Logic Controllers, along with easy-to-use Support Software, are available to flexibly handle applications from small-scale equipment to entire production lines with Programmable Logic Controllers such as those in the SYSMAC CJ1, CS1 and other series.
|
|
|
|
|
|
PLC 102
6" black and white LC-display 320x240 pixel
2 x 32-bit-processor - power
S5 compatible PLC
ergo button design
horizontal and vertical construction shape
all important field bus interfaces
Description
Wöhrle has launched a new compact PLC to the marked named PLC 102. This is a numerous renewal of an already multiple proved operation and controlling unit for simple up to middle tasks of automation and monitoring of machines and equipment.
This PLC belongs to a generation of controlling systems which can related more to the classic data processing units,
for example input of processing data, HMI and communication. This unit is furnished with integratedgraphic-able LC-Display and film keyboard and has two modern separate processing units in 32-bit format for PLC and HMI (human machine interface). Both the processing units are connected with a fast and simple interface. Due to this fact the processing unit is able to access to all kinds of data of the PLC including the processing picture-copy. The controlling part of the PLC 102 is to be programmed with Siemens STEP 5, the programming of the graphic part is to be done by means of one of the well-known high-level programming languages at the PC.
|
|
The software integrated development environment for drive-integrated PLCs. The 9300 Servo PLC and Drive PLC are both programmed by means of the Drive PLC Developer Studio (DDS) software integrated development environment. There are five different editors for use in conjunction with the IEC 61131-3 programming languages as well as an extremely powerful CFC editor. The built-in visualisation feature enables straightforward display of processes so that all the important information is available at a glance during commissioning.
|
|
|
|
see the results for the following category : 
