|
|
|
Foot operated switches available in single, wide, and twin variations Momentary and maintained action. SPDT, DPDT and 2-stage operation available. SIngle and twin versions have optional full guards available.
|
|
|
Linemaster offers a wide variety of multi-pedal foot switches in both standard and special configurations. We offer guarded and unguarded versions, IP20 to IP68, SPDT and DPDT and with or without cordsets.
|
|
|
The Linemaster Aquiline foot switch is available in both a polymeric housing and a metal housing, momentary or maintained action and single, twin and triple variations. The Aquiline is available in IP68 versions, offered in a variety of colors and wired or unwired models. Special variations are also made to customer specifications.
|
|
|
The Series 1025 Foot and Palm Switches are industrial-rated switches suited to applications where an operator must have both hands free to perform other functions or, where a highly visible switch is required for quick and easy operation. All of our switches are available in a wide choice of contact arrangements, ratings and enclosure styles. Industrial duty 4 way 5 port air valves are available for air control circuits.
|
|
Single or double foot switches with the EN418 emergency stop option.
Available with electric or pneumatic controls.
|
|
|
Our electric suspend pedal provides exceptional quality, longevity and performance with all the advantages of electronic operation.
|
|
Mechanical characteristics
Mecanical dated
Obstruction/Size 175 X 95 X 50 mm
Weight/Weight 500 gr.
Case/Casing Steel/Steel
Color/Black Color/Black
Base plate/Base black ABS/Black
Non-skid/Base Pad Neoprene
Electric characteristics
Electrical dated
Switch 10 (2) has 250 VCA
UL SCUMS VDE
Contactor, interrupter, reverser
NO, NC, SPDT
Wiring/black Wiring PVC/Black
2 meters, 5 X 0,34 mm2
Grommets inarrachable
Coil locking packing nipple
|
|
STANDARD
Mechanical characteristics
Obstruction 90 X 65 X 20 mm
Weights 230 gr.
Case Steel
Color Black
Non-skid Neoprene
Electric characteristics
Switch 10 (3) has 250 VCA
UL SCUMS VDE
Contactor, interrupter, reverser
Black wiring PVC
2 meters, 2 X 0,5 mm ²
Grommets inarrachable
|
|
Mechanical characteristics:
- Obstruction: 200 X 140 X 38 mm
- Weight: 350 gr.
- Enclosure: ABS UL
- Base plate: ABS UL
- Color: Black
- Non-skid: Neoprene
Electric characteristics:
- Switch: 10 (3) HAS 250 VCA
- Enclosure: UL SCUMS VDE, NO, NF, reverser
- Wiring: Black PVC, 2 meters, 5 X 0,34 mm ², Grommets inarrachable
|
|
Mechanical characteristics:
- Obstruction: 90 X 65 X 20 mm
- Weight: 230 gr.
- Enclosure: Steel
- Color: Black
- Non-skid: Neoprene
Electric characteristics:
- Switch: 10 (3) has 250 VCA, UL CSA VDE, Contacteur, interrupter, reverser
- Wiring: Black PVC, 2 meters, 2 X 0,5 mm ², Grommets inarrachable
|
|
Introducing Linemaster Throttle Controls.
There are numerous applications for these controls, including use in various types of electric vehicles where accurate control of speed is required. Linemaster offers a rugged construction for long life, ergonomic friendly designs and ease of operation. If you have an application that requires a throttle control, please contact our Customer Service Department for details at 1-860-974-1000.
FEATURES:
Weather resistant components
Auxiliary Switch(es)
Retrofit Installations
Custom Cordsets
Mounting & Linkage Configurations
Arm Configuration
|
|
| ... products without technical information |
| |
The switch is designed so to open a three-pole electric circuit when the pressure in the system rises and to close it when the pressure decreases.
- Designed for electric boilers of coffee machines as main application.
- UL approved (USA), SEV-ASE approved (Switzerland).
|
|
Digital display
100% adjustable set point and deadband
All solid state design
Remote and local "I AM Working®" status signal
Captures and displays MAX/MIN process extremes
Continuously stores HI/LO extremes
Adjustable ranges: 0 to 4500 psig (310, 3 bar) ; 0 to 200 psid (13, 8 bar) ; -300 to 1000ºF -184 to 538ºC
4-20 mA output models available
Division 1 (Intrinsically Safe) Division 2 models available
Approvals: UL, cUL, CE, ATEX, GOST
|
|
Do you attach special value to the durability and performance of your vacuum instrumentation? We as developer and manufacturer of vacuum transducers, gauges, vacuum meters and controllers supply products which will exceed your expectations.
Thyracont Vacuum Instruments GmbH supplies vacuum measurement and control instruments for rough to ultrahigh vacuum.
All our products are "Made in Germany"
|
|
Comprehensive range of pressure switches designed to monitor pressure in pneumatic and hydraulic systems available with different adjustment ranges according to customers’ application requirements (from –1 to 600 bar). Accurate and reliable they are very easy to be used and programmed.
Digit LED display to read information. Available with ON/OFF, NPN/PNP Open Collector and analogue outputs, bar or psi engineering units. Some models can be also supplied with an integrated diagnostic function. 1/4” and 1/8” Gas or NPT standard pressure ports.
Suitable to be used with air, gas, water, oil and aggressive fluids.
|
|
General Description
The ED101 series electronic module is used to control DSA/DWE/DWU pressure control valves. The module accepts up to 4 on/off input signals which select one of four pressures set by potentiometer adjustments on teh card. Two ramp adjustments provide smooth transition between selected pressures.
|
|
Relative and absolute pressure switch Type 615
Relative –1 ... 0 - 600 bar
Absolute 0 ... 0.3 - 16 bar
The type 615 pressure switches measure pressure by means of highly resistant ceramic elements. An open collector (transistor) output accommodates loads up to 100 mA. Either an N/C or N/O contact may be used, and the upper and lower switching point can be freely selected in the range 5 to100% fs. Various electrical and pressure connections are available to suit given applications.
|
|
|
|
|
|
The efector 500 is based on a ceramic measuring pressure cell which converts the measured quantity of pressure into a capacitive signal as a result of the deflection of a diaphragm. A microprocessor controls the evaluation of the electrical signal. For the efector 500 the system pressure is directly indicated on the unit by an LED display.
The extraordinary mechanical characteristics of the efector 500 result from the following design features:
The measuring pressure cell is designed in such a way that the diaphragm is supported by the base in the case of overload pressure. This leads to a high strength against hidden pressure peaks at values outside the measuring range.
The measuring pressure cell consists of ceramic which has ideal elastic features thus ensuring a high long-term stability of the diaphragm.
The electronic circuitry is made in film technology, i.e. a flexible, temperature-stable and extremely resistant polyimide film is used as a carrier for the SMD components. In conjunction with a special potting compound this leads to a high shock and vibration resistance.
|
|
100 Series
Pressure, Differential Pressure & Temperature Switches
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: 30 "Hg Vac to 5000 psi; 1 bar Vac to 344 bar; 0.2 "wcd to 500 psid; 0,5 mbar d to 34,5 bar d ; -180 to 650 ºF; -117 to 340ºC
Approvals: UL, CSA, CE, TUV
|
|
J6 Series
Product Overview
- Rugged, NEMA 4X, epoxy coated enclosure
- single switch output
- SPDT switch output
- Adjustable deadband versions available
- Adjustable ranges: 30 "Hg Vac to 6000 psi, 1 bar Vac to 414 bar
- Approvals: UL, CSA, CE
|
|
| ... products without technical information |
| |
Disconnectors and switch-disconnectors vertical break design SBC range
Description
The disconnectors and switch-disconnectors SBC range is visible breaking, vertical break design and principally used in rural distribution networks. They are suitable for horizontal or vertical mounting on metal, concrete or wooden single or double poles.
SBC types have a load breaking head comprising a chamber and fast opening auxiliary blade.
This arrangement combines the high speed action of the auxiliary blade with the cooling and confining effect of the enclosure to restrict the arc and limit the production of gases
|
|
Load break switch: switchblade with integral arc-strangler load breaking device for hinge-style mounting. This product includes a stationary core and a spring-loaded sliding sleeve which could quickly cut off the arc produced between the mounting contact and blade during load breaking operation.
Rated voltage: up to 15.5kV
Rated continuous current: up to 200A
|
|
Yaskawa's SF6 load break switches are safer to operate than vacuum and other competitive types because the gas pressure is continuously monitored by a pressure switch and is mechanically and electrically interlocked if pressure is lowered. Highest quality porcelain bushings are used for longer and more reliable insulation performance, thus making the Yaskawa switch ideal for use in hostile and dusty environments such as mines, heavy salt-ridden coastal areas, and dense tropical areas.
Yaskawa furnishes the load break switch in three application configurations.
Pole
Pad
Submersible
|
|
|
|
|
|
Fuse switch-disconnectors from 32 A to 800 A
Description
Nominal current from 32 to 800 A
Voltage rating up to 690 V (AC) and 750 V (DC
3 and 4 pole version
Test position
Indication by fuse operating mechanism
Positive contact indication
Fuse compartment with IP20 protection by insulating covers as standard
Locking device to prevent access to fuses when the switch is in the "ON" position
Upstream-downstream double insulation
Reversed power supply
Compliance with standards IEC 947-1,-3,-5, EN 60947-1,-3 and -5, IEC 60269-1 to -4, EN 60269-1 to -4, BS 88-1 to -4, DIN 43620, NFEN 60269-1 to -4, NFC 63220
Specificity of the INF family:
Nominal current from 32 to 800 A
Nominal current from 32 to 800 A
Available in 7 sizes
Can be used for all NFC, BS, DIN fuses
Specificity of the ISFT/ISFL family:
Nominal current from 100 to 630 A
3 sizes in ISFT (100, 160, 250-630 A)
2 sizes in ISFL (160, 250-630 A)
Several installation types: mounting plate, DIN rail (ISFT) or on busbar (ISFT/ISFL)
Connection by cables or on busbar
|
|
Fused isolator switches from 32 to 1250 A
Description
For NFC or DIN, BS, UL type fuses
3 or 4-pole
For direct operator, external front-mounted and RH side-mounted operators, external LH side-mounted operator
Robust and compact handles : padlockable using up to 3 padlocks, lockable, with door interlock, black/grey or yellow/red, IP65 or IP55
Auxiliary contacts:
» Two early break and “O” and “I” position signalling auxiliary contacts, configurable and common throughout the range (GS1AM110 and GS1AM101)
» Auxiliary contacts GS1AN suitable for isolation. Reversibility of these contacts to convert a N/C contact to a N/O contact and vice versa
» Off-load control circuit test facility, with auxiliary contacts GS1AM110, GS1AM101 or GS1ANT used in conjunction with handles GS2AHT
» Auxiliary “blown fuse” signalling contacts.
|
|
|
|
see the results for the following category : 
