|
|
Turn signal switches are built to complement electromechanical shifters or can be mounted independently. A variety of operations are available such as wiper speeds, head lamp controls, button and auto cancel options.
|
|
Paddle and Professional slide Professional controls
Eaton's unique family of dimmer and wiper controls are field proven to be the market's most dependable controls. Although originally designed for the heavy professional truck market, applications in various other types of vehicles exist. Paddle and slide versions are available and both have the look, feel and durability associated with our controls. Bezels and suppliers of actuators are molded in a soft matte finish. Illuminated and non-illuminated versions are
available. Board mounted PROFESSIONAL LED's located behind a industrial laser etched professional panel provide illumination.
Customized light panel lettering and custom pad printed bezels are
also available. Both dimmer and wiper controls are designed to fit in the NGR gang mount system to compliment the NGR family of switches.
Ratings (Dimmer Only): 4, 6, 8,10A @ 14V dc; 2, 3, 4, 5A @ 28V dc.
Mechanical Life: 100,000 operations, maximum.
Operating Temperature Range: -40°C to +85°C (-40°F to 185°F).
Base Material: High grade thermoplastic molding material.
Mounting Means: Snap-in mounting with plastic bezel.
Mounting Hole:
Rectangular panel cutout: 44 x 22mm (1.734 x .867²).
Panel Thickness: .76 x 4.80mm (.030 to .190²).
Approximat weight: 1.5 oz. |
|
600 SERIES - INDUSTRIAL CONTROL
Industrial Explosion Proof foot switch Series 600 offers added environmental protection against water and oil, through the addition of sealing 0-rings on the pivot rod and between the cover and base. This is accomplished by increasing the thickness of the housing walls, without negating the integrity of the metal to metal contact required to qualify as explosion proof. The same specifications apply for the 600 Series as detailed above for the 500 Series, except for a modest increase in weight.
500 SERIES - INDUSTRIAL CONTROL
Nonsparking cast aluminum housing. Aluminum full guard with integral base plate painted Alert Orange. All models supplied with a 3/4"-14 N.P.T. threaded rigid metal conduit entry and mounting provisions in the base plate. The two pedal model is supplied with a divider bar between pedals which helps prevent accidental operation of both pedals at one time.
|
|
Single and modular multiple foot switches PA, PX and PC series
Main data:
• Polymer housing, three conduit entries.
• Protection degree IP53 or IP65.
• 10 contact blocks combinations available
• Various auxiliary devices available: safety lever, pedal actuator suppliers lock and two stage actuating force
• Assembled through special joining kits: joining device, carrying rod, boxes with emergency push button and stabilizing plate
These switches series integrates the wide range of products that Pizzato Elettrica can offer to its customers.
For further information it’s possible to visit the web-site www.pizzato.com or ask for the general catalogue.
|
|
Food switches are mounted on machines and plants in cases where operation using the hands is not possible. They are used to start and stop operations and production processes.
Depending on the environmental conditions and mechanical duty, differing versions of food switches are used. The robust GF and GFS range switches are generally used in the engineering industry, e.g. on industrial presses, punching and bending equipment as well as in sheet-steel processing. Applications for the plastic KF range switches include use on laboratory apparatus, in the electro-medical area and on textile machinery.
Design and mode of operation:
All the foot switches are available in versions with multible pedals. GFS range switches are mounted with a shield to protect against unintentional actuation. GF and GFS range switches are mounted with slow or snap action or Hall sensors. GF-Ex and GFS-Ex range switches are EEx approved under the Certificate of Conformity PTB Ex-89.C.1051. The Ex 13 contact block carries the designation EEx d IIC T6. |
|
Pedal Switches
Strong aluminium housing. The unit is operated through a red, non-skid pedal which is covering the whole switch. An oil and chemical-resistant rubber membrane protects safely against dust and humidity (protection type IP65). Stroke limitation avoids mechanical overloading.
Aluminium pedal switches, modular contact blocks inside allow various contact possibilities. |
|
| Foot operated variable controller to be used on Universal AC/DC fractional horsepower motors. The 980-SC3 is rated 6 Amps at 125 VAC and the 981-SC36 is rated 4 Amps at 250 VAC. |
|
Introducing Linemaster Throttle Controls.
There are numerous applications for these controls, including use in various types of electric vehicles where accurate control of speed is required. Linemaster offers a rugged construction for long life, ergonomic friendly designs and ease of operation. If you have an application that requires a throttle control, please contact our Customer Service Department for details at 1-860-974-1000.
FEATURES:
Weather resistant components
Auxiliary Switch(es)
Retrofit Installations
Custom Cordsets
Mounting & Linkage Configurations
Arm Configuration |
|
500 SERIES:
Environmental Ratings:
CLASS I, DIVISION 1, GROUP D
CLASS II, DIVISION 1, GROUP F & G
CLASS I, ZONE 1, GROUP IIA
NEMA Type 2, 7D & 9F
UL ENCLOSURE 2
IP41
Nonsparking cast aluminum housing. Aluminum full guard with integral base plate painted Alert Orange. All models supplied with a 3/4"-14 NPT. threaded rigid metal conduit entry and mounting provisions in the base plate. The two pedal model is supplied with a divider bar between pedals which helps prevent accidental operation of both pedals at one time.
Size: 10-1/4" x 11" x 4-3/8"
Weight: Approx. 7-3/4 lbs.
600 SERIES:
Environmental Ratings:
CLASS I, DIVISION 1, GROUP D
CLASS II, DIVISION 1, GROUP F & G
CLASS I, ZONE 1, GROUP IIA
NEMA Type 2, 3, 4, 6, 6P, 13, 7D & 9F
UL ENCLOSURE 2, 3, 4, 6, 6P, 13, 7 & 9
IP68
Meets IEC 601-2-2
Driptight - Dusttight - Watertight - Oiltight
Industrial Explosion Proof foot switch Series 600 offers added environmental protection against water and oil, through the addition of sealing 0-rings on the pivot rod and between the cover and base. . The same specifications apply for the 600 Series as
detailed above for the 500 Series, except for a modest increase in weight.
|
|
Metal enclosure
1 or 2 pedal
With protective shield
Max. 4 contacts per pedal
|
|
500 SERIES - MEDICAL EQUIPMENT
Nonsparking cast aluminum housing. Aluminum base plate with nonskid conductive rubber base pad. Both models prewired with potted industrial connector MS-3102R-18-4PW. Two pedal model wired with an electrical interlock and supplied with a divider bar between pedals which helps prevent accidental operation of both pedals at one time. Foot switch painted black.
600 SERIES - MEDICAL EQUIPMENT.
Medical Explosion Proof foot switch Series 600 is a UL Listed construction that allows the addition of sealing 0-rings on the pivot rod and between the base and cover. This is accomplished by increasing the thickness of the housing wall, without negating the integrity of the metal to metal contact required to qualify as explosion proof. The same specifications apply for the 600 Series as detailed for the 500 Series, except for a modest increase in weight and the mating connector required. Use mating connector MS or ~ which includes cable workholding, or CA-06R-18-45W-(Al 05)~(F74)* which includes cable clamp. |
|
Developed for reliable operation in a variety of environments. Conforms to UL Recognized Component Mark for Canada and the United States. All steel housing protects air industrial bulb.
Tubing used is reinforced and connected to the foot switch with a molded grommet for pull-out protection. Remote switch has bulkhead mounting provisions. Wide operating temperature range. Twin foot switch models available. Can be mounted in a full guard.
Medical grade tubing is available
Size: 2.9" x 2.5" x 1.3" Weight: Approx. 1.0 lbs. (0.45 kgs.)
The new AIR-SEAL foot switch series combines a foot operated air bulb mounted in our strong, steel COMPACT housing and a remotely located air operated electric snap switch.
The AIR-SEAL is available in either momentary or maintained versions, with SPDT snap
switch. A 10 foot 1/8" ID PVC tubing connects the foot pedal to the remote air switch,
which is equipped with a 9/16" NF bulkhead mount. The tubing is connected at the foot
switch end using a molded on strain relief grommet providing superior pull out
protection. The AIR-SEAL can
also be mounted in the Linemaster Full Guard 522-B14 for
those applications which require full guarding of the foot switch pedal. |
|
HERCULES
POTENTIOMETER FOOT CONTROL
Environmental Ratings:
NEMA Type 1, 2, 4 & 13
Driptight - Dusttight - Watertight - Oiltight
EN 60529 Degree of Protection IP56
Key Benefits
This foot switch is designed for use with variable speed motor drives and is available in selected 2 watt linear values. Specify the maximum resistance you want. Depressing the treadle rotates the potentiometer from zero to the selected maximum resistance shown below. By wiring to the third terminal it goes from the maximum resistance to zero. The treadle is spring loaded and returns to the normal position when the foot pressure is removed. A SPDT auxiliary switch contact rated at 15 Amps 125-250 VAC can be added to the control. The auxiliary switch will operate at the beginning of the treadle stroke. On special order, up to 3 SPDT switches can be added and adjusted for operation at any point of the treadle stroke. Details on switch size, weight, full shields and construction are the same as for the Hercules foot switches.
"OX" Shield available
|
|
ATLAS
HEAVY DUTY FOOTSWITCH
Environmental Ratings:
NEMA Type 1, 2, 4, 6, 6P & 13
UL ENCLOSURE 1, 2, 4, 6, 6P & 13
IP68
IEC 60601-2-2
Driptight - Dusttight - Watertight - Oiltight
Key Benefits
Foot switch developed for worldwide application
Snap action - SPDT and DPDT with forced disconnect (positive break) on NC contacts
Slow action mechanism with forced disconnect on the NC contacts - available as SPDT make before break or break before make
Direct PLC SUPPLIERS interface compatible (two-circuit bifurcated contact single-pole versions)
Galvanically isolated bifurcated contacts - NO and NC circuits can be wired to different loads and polarities
Foot switch has a rugged cast aluminum housing painted Alert Orange
Oversized "O" & "OX" shield models accept oversized safety shoes manufacturers and metatarsal foot guards. The "OX" shield has an additional 3/4" (19.1mm) opening height as compared to the "O" shield
Single PG 16 threaded conduit entry is standard
U.S. and other international conduit sizes and side entry for twin or triple interconnect, available to the O.E.M. on special order
3 holes provided for rigid mounting to the floor or equipment
Size: 9" x 6" x 5-1/2"
Weight: Approx. 4-1/2 lbs. (2.1 kgs.)
|
|
HERCULES
HEAVY DUTY FOOTSWITCH
Environmental Ratings:
NEMA Type 2, 4 & 13
UL ENCLOSURE 2, 4 & 13
CSA ENCLOSURE 2, 4 & 13
EN 60529 Degree of Protection IP56
Driptight - Dusttight - Watertight - Oiltight
Key Benefits
Rugged cast metal enclosure has sufficient weight to keep the foot switch from sliding when being operated.
All models have a neoprene cover gasket plus O-rings on the activating shaft and a separate ground screw.
In all Maintained Contact models the release is accomplished by simply pressing the latch with a light forward movement of the toe. The release is placed under the Full Shield so falling objects cannot easily release it.
Oversize "O" Shield models accept oversized manufacturer of safety shoes and metatarsal foot guards.
"OX" Shield also available
Special Dual 1/2" - 14 N.P.T. threaded conduit entry and metric sizes available to the O.E.M. on special order.
Special Twin models available to the O.E.M. on special order.
Painted Alert Orange.
Single 3/4" - 14 N.P.T. threaded conduit entry is standard.
3 holes provided for rigid mounting to the floor or equipment.
Size: 9" x 5-3/4" x 4-3/4"
Weight: Approx. 8 lbs.
|
|
| The Varior Manufacturer of potentiometer foot switch was designed as a low cost foot control where a non-watertight housing is suitable. Four standard prewired 2 Watt linear models are available. The momentary models have a spring return pedal action, and the maintained models have adjustable friction pads. Maximum resistance must be specified when ordering. The foot switch has a drawn steel housing with black cover, complete with full treadle pad and nonskid base pad. |
|
Introducing Linemaster's new infrared technology! The new IR Wireless System eliminates the nuisance of wires under foot while invisible infrared light waves fill the room with 360° of signal. And because it uses light rather than radio waves, it resists interference. So while all foot switches free the hands, the Linemaster IR System is so ingenious and so dependable, it will also free your mind. Only from Linemaster - American-made innovation at work.
Environmental Ratings:
EN 60529 Degree of Protection IP68 (Foot Switch)
Key Benefits:
- Range: Typically 40 feet
- Switch Functions: Maximum of 5
- Multiple systems can be operating at the same time in the same room:
4 separate industrial transmitters and professional receivers, 2 separate transmitters and 2 receivers along with 2 transmitters paired to 1 receiver
2 sets of transmitters paired to 2 separate receivers
- Transmitter battery life: 200 hours @ 50 % duty cycle typical
- Power Consumption (Transmitter): Stand-by 100ua
- Power Requirements (Receiver): 6VDC @ 200ma
- Battery Powered Reciever optional
- Receiver Output: SPST relay, 0.5 amp contacts
- Low battery indicator
- Switch activation indicator(s)
- 360 degree transmitter
- Transmitter uses our industry proven Aquiline foot switch(es)
- No product calibration required - plug and go
- Uses industry standard professional batteries
- CE Marked
Certification
Classified to IEC/UL 60601.1 Medical electrical equipment by Underwriter's Laboratories, Inc with respect to fire, shock, and mechanical hazards in accordance with IEC/UL 60601.1.
Classified with respect to electric shock, fire, mechanical, and other specified hazards only, in accordance with Can/CSA C22.2 No. 60601.1
EMC Standards
EN60601-1-2: 2001
IEC 1000-4-2: 1995 Electrostatic Immunity
IEC 1000-4-3: 1995 Radiated Electromagnetic Field Immunity @ 10v/m
IEC 1000-4-4: 1995 Electrical Fast Transients Immunity
IEC 1000-4-5: 1995 Surge Immunity
IEC 1000-4-6: 1996 Conducted RF Immunity
IEC 1000-4-8: 1993 Power Frequency Magnetic Field Immunity
IEC 1000-4-11: 1994 Voltage Dips and Variations
EN 55011: 1998 Radiated and Conducted Emissions, Group 1 Class B
FCC Part 15 Radiated and Conducted Emissions, Class B
IEC 61000-3-2: 2000 Power Harmonics Class A
IEC 61000-3-3: 1995 + A1: 2001 Voltage Fluctuation, Section 5
Features:
- USB Compatible
- Easily replaces currently-used corded switches; just plug and go
- Long battery life
- No cord to restrict the user's movement
- Uses industry-proven Aquiline switches
SIZE:
Transmitter: 14.0"x10.0"x3.0"
Receiver: 5.0"x3.5"x2.75"
WEIGHT:
Transmitter: 5.5 lbs. w/ batteries
Receiver: .45 lbs.
|
|
Radio foot switch
with or without protective shield
low energy and radio emission
works without battery and totally self-sufficient
different coulours according to RAL |
|
| Output can be mechanical, electronic, hydraulic, medium or heavy duty throttle controls. Variety of pedal styles used for trucks, construction, landscaping, farm equipment and buses. When used with available throttle cable, offers a quick and easily installed complete system. |
|
| The Series 1025 Foot and Palm Switches are industrial-rated switches suited to applications where an operator must have both hands free to perform other functions or, where a highly visible switch is required for quick and easy operation. All of our switches are available in a wide choice of contact arrangements, ratings and enclosure styles. Industrial duty 4 way 5 port air cocks are available for air control circuits. |
|
Welcome to Spohn + Burkhardt
Our Products
Our production program includes a diverse range of controllers, control stations, resistors, starters, in addition to a broad spectrum of controls for all types of transport machinery, construction and shipping cranes.
Our comprehensive series production is customisable in many different ways according to specific needs.
Our Company
The firm was founded in 1920 by Karl Spohn and David Burkhardt and remains in family ownership.
Our highly motivated team strives to achieve maximum customer satisfaction starting with the first contact through to after-sales service.
Our recipe for success has remained consistent over the years – and effective:
flexibility in product development and reliability in production.
Quality standards
A high quality standard – and therefore the complete satisfaction of our clients is one of our most important aims.
This is confirmed by various certifications, e.g. DIN EN ISO 9001-2000, CCC as well as by national and international standards, IEC 947, EN 60947, CSA and UL |
|
Mechanical characteristics:
- Obstruction: 165 X 65 x35 mm
- Weight: 360 gr.
- Enclosure: Steel
- Color: Black
- Non-skid: Feet Rubber
Electric characteristics:
- Switch: 10 (2) 250 VCA, UL CSA VDE, Contactor, interrupter, reverser
- Wiring: Black PVC, 2 meters, 2 X 0,5 mm ², Grommets inarrachable |
|
| Tough all plastic lightweight construction footswitch offering a wide variety of switching combinations, it can be sealed up to IP68 upon request. Foot guard and colour options are available upon request. |
|
Mechanical characteristics:
- Obstruction: 200 X 140 X 38 mm
- Weight: 350 gr.
- Enclosure: ABS UL
- Base plate: ABS UL
- Color: Black
- Non-skid: Neoprene
Electric characteristics:
- Switch: 10 (3) HAS 250 VCA
- Enclosure: UL SCUMS VDE, NO, NF, reverser
- Wiring: Black PVC, 2 meters, 5 X 0,34 mm ², Grommets inarrachable |
|
Mechanical characteristics:
- Obstruction: 90 X 65 X 20 mm
- Weight: 230 gr.
- Enclosure: Steel
- Color: Black
- Non-skid: Neoprene
Electric characteristics:
- Switch: 10 (3) has 250 VCA, UL CSA VDE, Contacteur, interrupter, reverser
- Wiring: Black PVC, 2 meters, 2 X 0,5 mm ², Grommets inarrachable |
|
Switches approved to UL60601-1,IEC 60601-1
Multi-pedal footswitch, 1-6 pedal options
Compact for discreet placement beneath equipment, or for storage
Robust but aesthetic design
Enclosed rating IPX7 (IPX8) on request
Single pole normally open contacts rated 50mA 12Vdc or 30mA 24Vdc
Soft touch buttons with a light operating force
Choice of colours available
Choice of professional labels or logos available
Typical applications include wide range of Electrosurgical and Patient Handling
|
|
|
|
