|
|
|
|
|
|
Touchscreen HMIs that strike the perfect balance of advanced features and value.
The G3 Kadet series of operator interface panels offer a host of functional interface and connectivity features for applications where FTP access, data logging, and web server capabilities are not needed. Based on the G3 series, with many of the same capabilities, the G3 Kadets offer far more features than conventional HMIs while providing an advanced interface that is ideal for OEMs, discrete machinery and process machinery.
Available in 4.3", 5.6" and 8" models, the G3 Kadet series offers the same protocol conversion benefits as the original G3. The units have multiple serial ports, drag-and-drop configuration via Crimson programming software, and port sharing capabilities. The larger models feature integrated Ethernet allowing simultaneous communications with up to six device types including PLCs, PCs, drives, PID controllers
and more.
Models :
- G304K 4.3" Operator Interface with TFT Display
- G306k 5.6" Operator Interface with TFT Display
- G308k 8" Operator Interface with TFT Display
* CONFIGURED USING CRIMSON® 2.0 SOFTWARE
* TWO SERIAL COMMUNICATIONS PORTS
(1 RS-232 AND 1 RS-232/422/485)
* UNIT’S CONFIGURATION IS STORED IN NON-VOLATILE FLASH
MEMORY
* BRIGHT 4.3-INCH TFT ACTIVE MATRIX 256 COLOR 480 x 272
PIXEL DISPLAY
* THREE FRONT PANEL LED INDICATORS
* NEMA 4/IP65 FRONT PANEL
* POWER UNIT FROM 12-28 VDC
* RESISTIVE ANALOG TOUCHSCREEN
|
|
|
|
|
|
Operator terminals
TERMEX is an intrinsically safe operator panel family for hazardous areas
The text terminals TERMEX 220 and TERMEX 320 with a monochrome display (4 lines, each with 20 characters) are used for operator guidance, the presentation of measured values and message displays on systems of low complexity.
The monochrome graphics terminals TERMEX 230 and TERMEX 330 are used on systems with increased requirements in terms of presentation and operation. The graphics terminals have a single resolution of 240 x 128 pixels (maximum 14 lines, each with 40 characters) and permit a more ergonomic presentation of the operating pages by means of different font sizes and embedded graphics.
The intrinsically safe TERMEX terminals are connected to the respective PLC via the power supply unit in the safe area. Various interfaces are available for the transfer of data from and to the PLC.
The TERMEX terminals are available with ATEX approvals for Zones 1 and 2 (to category II 2 G) and Zone 22 (to category II 3 D).
TERMEX has also an FM-approval for the use in North America. The approval is in accordance with IS CL I, DIV 1, GP A, B, C, D.
|
|
Swing Arm / Command Arm
A significant feature of the new General catalogue is a chapter devoted to swing arms (Page 380). Although OEM’s will be the initial target, it is worth mentioning this chapter to all industrial users, as the product range is not only comprehensive, but is aesthetically pleasing and well made.
In our 2006/2007 catalogue, there is information on three different ranges:
- OICP, Operator Interface Panel Control
- SA SL, Mild Steel Swing Arm SL
- SA SS, Stainless Steel Swing Arm SS
Although we haven’t taken on the complete range, you will find the most popular sizes, and all the accessories you need to be able to compete in thisniche market.
Traditionally, the swing arm user knows what he wants, which will be very specific to his machine or application. Fortunately, this product range is very versatile, and should meet the majority of our customers requirements.
|
|
5000 Series Integrated - Keypad/Display Units
Integrated keypad and display hardware for harsh industrial or exposed public environments
- Vandal and impact resistant
- Weather, water and dust resistant
- Available with metal keys, polymer keys or Storm GFX keys
- Can be supplied with a back-lit 4 line by 20 character LCD, or non-loaded, ready to accept a customer specified display
|
|
|
|
|
|
CIMO - monitor operator panels
There is a wide range of CIMO monitor operator panels
to suit every task and every budget.
CIMO monitor operator panel with LCD "TFT display"
Extremely slim design, outstanding colour brilliance,
excellent reading angle, front panel membrane-protected
against chemicals, new ergonomic design -
just a few of the impressive features of this top
product from Wöhrle.
CIMO operator panel with Windows CE - the latest
generation
This particularly high-quality range is the result of
the latest Wöhrle development and closes the gap
between text-oriented computer terminals and traditional
industrial PCs. The operating system is
Microsoft Windows CE. This means that it is possible
to operate all standard applications and utilise the
advantages of this platform, such as the Internet
facility.
TFT LC displays are provided for the operating panels
of the future, providing high resolution and excellent
colour.
These ultra-compact operator panels are setting the
standard.
CIMO operator panel is the economical version
An easy-to-use membrane keyboard and a graphic
black and white LC display make sure that control
and monitoring is cost-effective. A particularly economical
solution.
CIMO monitor operator panel with CRT
This range of equipment with monochrome cathode
ray tubes provides the most innovative and economical
solutions in the field of operating and monitoring
plant and machinery. Protected at the front to IP 65
they also withstand harsh environments.
|
|
unipo® control panel UCP 5
The individually configurable small control panel
UCP5 is the most variable visualisation solution for text- and graphic-displays in industrial applications, for diagnostic and analyser purposes as well as within building automation.
Its modular construct, the intuitively operated projecting software UCPTool® and the industrial quality (IP65 protected) make UCP5 the first choice for new projects and for replacement. UCP5 substitutes a large assortment of plaintext displays and so grants the continuous availability of your plants!
|
|
|
|
|
|
Operator Display/Control Station
Control Station Overview
Kar-Tech's Operator Control Station puts all the critical machine information that a user needs in front of him in a single, central location. The Control Station can be used for as little as textual or graphical diagnostic information (valve pressures, hours, etc.), or it can be used for local machine control or calibration of machine settings, and integrated with GPS, radio control, remote diagnostics and any other Kar-Tech technology. It's a sealed, solid, all-in-one solution that looks sharp, offers state-of-the-art technology, and is built to last.
At A Glance:
- Display/Diagnostics: Ideal for a simple operator display station. View hours, pressures, voltages, etc.
- Command/Control: Can be used to reduce cost - upgrade away from switches and meters.
- Built To Last: Enclosure and all switches and buttons are sealed to IP-67.
- Sunlight-readable Display: EASY to read, even in bright, direct sunlight!
Basic Technical Info:
Kar-Tech Control Stations operate between a range of +9 to 40VDC, and are protected for voltage spikes and reverse battery connection. The number and type of inputs and outputs vary by application.
Typical Applications:
- Machine Diagnostics
- Industrial HMI
- Complex Machine Control
- CANbus/Engine Display
Kar-Tech Control Stations have been used successfully in multiple different market sectors.
Available Options
- Integrated radio receiver
- Integrated cellular comms. for remote diagnostics
- Integrated GPS for asset monitoring/tracking
|
|
|
|
|
|
CIMO - monitor operator panels
There is a wide range of CIMO monitor operator panels
to suit every task and every budget.
CIMO monitor operator panel with LCD "TFT display"
Extremely slim design, outstanding colour brilliance,
excellent reading angle, front panel membrane-protected
against chemicals, new ergonomic design -
just a few of the impressive features of this top
product from Wöhrle.
CIMO operator panel with Windows CE - the latest
generation
This particularly high-quality range is the result of
the latest Wöhrle development and closes the gap
between text-oriented computer terminals and traditional
industrial PCs. The operating system is
Microsoft Windows CE. This means that it is possible
to operate all standard applications and utilise the
advantages of this platform, such as the Internet
facility.
TFT LC displays are provided for the operating panels
of the future, providing high resolution and excellent
colour.
These ultra-compact operator panels are setting the
standard.
CIMO operator panel is the economical version
An easy-to-use membrane keyboard and a graphic
black and white LC display make sure that control
and monitoring is cost-effective. A particularly economical
solution.
CIMO monitor operator panel with CRT
This range of equipment with monochrome cathode
ray tubes provides the most innovative and economical
solutions in the field of operating and monitoring
plant and machinery. Protected at the front to IP 65
they also withstand harsh environments.a
|
|
Operating temperature -20 ... +70 °C ; Storage temperature -40 ... +80 °C ; Operating load 0.5 + - 0.3 N Operating life 10.000.000 Hits by finger
Operating life 100.000 Characters by pen ; Light Transmissivity > 80 %
Top surface hardness >2H
|
|
|
The LabVIEW HMI family of industrial panels provides three different hardware platforms so LabVIEW developers and programmers can deploy operator interfaces alongside a broad range of NI product platforms. The National Instruments FPT-1015 is a 15 in. flat-panel touch screen for all PXI embedded controllers and a flat-panel monitor for the NI Compact Vision System. The NI TPC-2006 is a 5.7 in. Windows CE touch panel computer programmed with LabVIEW PDA to create a remote terminal for headless real-time controllers such as Compact FieldPoint and CompactRIO. The NI PPC-2015 is a Pentium 4 PC that runs Windows XP and works with a wide range of I/O devices from National instruments; it connects via Ethernet to all NI PACs. To create an HMI for a broad range of distributed data the LabVIEW Datalogging and Supervisory Control (DSC) Module provides connectivity to NI hardware and third-party hardware through OPC, Modbus TCP/IP, and gateways for industrial communication protocols.
|
|
|
Full graphics capable HMI family, AC or DC supply versions. Recipe, alarm and data logging. Animation and bitmap functions. Common software for all models. IP65.
|
|
Operator panels of series AS-Pxx:
The devices allow for simple operation, diagnosis and monitoring of your machines and systems. You can design the user interface according to your requirements.
An intuitive operator prompting via touch screen, assigned function
keys or a combination of both are possible. The use of insertable strips allows for individually labelling the keys.
Operator panels of series V606:
The convenient and cost-efficient operator panels for all systems,
which can be connected via modbus, are particularly suited for simple visualization tasks. In combination with our controllers, it provides you with a complete automation solution.
|
|
Flexible Design and Options
- Available in 12", 15" & 17" touch screen sizes
- Standard and Performance configurations for ease of ordering
- Deluxe units come with either a CD-RW or DVD+/-RW drive
- Optional stainless steel bezel
- Memory and hard drive upgrades available, including Compact Flash
- Key communication interfaces - Ethernet, USB, serial, parallel; ISA & PCI slots are available for field bus or other add-on requirements
Ease of Use and Maintainablilty
- Five built-in system access keys that provide full functionality without a keyboard or mouse
- Front USB port for easy access to portable devices
- Hardware diagnostics information that can be communicated to GE Fanuc software
- Meets stringent specifications for industrialhardened equipment, including hazardous locations (Class I Div II)
|
|
| ... products without technical information |
| |
|
|
