|
|
PVD3DIN, Proportional Valve Driver, direct DIN solenoid mount, DIN cable connector
Benefits and Features:
• Versatile digital design
• Large, easy-to-use adjustments and 3-digit seven-segment LED display
• Completely sealed even during set-up
• Wide range of supply voltage
• Electronic limiting circuit / short circuit proof
• Load can be connected & disconnected live
• Protected against wrong connection
• Simple control with analog input, the reference voltage is locally supplied
• Energy efficient PWM circuit, no heat sink is required
• Current sensing maintains output regardless of changes in supply voltage and coil resistance
• Thick wall, sturdy housing made of flame retardant plastic UL94-V0
• Mounting: DIN 43650-A/ISO 4400 for solenoid as well as cable connector
• Easy troubleshooting / cable length not an issue
Specifications:
• Operating voltage: 9 - 35VDC
• Maximum output current: 3A
• Ramp time: 0.0 to 99.9s
• Linearity: 0.5%
• Protection grade: IP67
• Input signal: user selectable 0-5V, 0-10V, 0-20mA or 4-20mA
• PWM / Dither frequency: 50-500Hz
• Operating temperature: -40° to +75° Celsius
|
|
PVD3X3M, Proportional Valve Driver, direct DIN solenoid mount, 3m cable 4 x AWG18
Benefits and Features:
• Versatile digital design
• Large, easy-to-use adjustments and 3-digit seven-segment LED display
• Completely sealed even during set-up
• Wide range of supply voltage
• Electronic limiting circuit / short circuit proof
• Load can be connected & disconnected live
• Protected against wrong connection
• Simple control with differential analog input
• Energy efficient PWM circuit, no heat sink is required
• Current sensing maintains output regardless of changes in supply voltage and coil resistance
• Thick wall, sturdy housing made of flame retardant plastic UL94-V0
• Mounting: DIN 43650-A/ISO 4400 solenoid
• Easy troubleshooting
Specifications:
• Operating voltage: 9 - 35VDC
• Maximum output current: 3A
• Ramp time: 0.0 to 99.9s
• Linearity: 0.5%
• Protection grade: IP67 **
• Input signal: 0 to +10V or 0 to –10V
• PWM / Dither frequency: 50-500Hz
• Operating temperature: -40° to +75° Celsius
• Size: 2.5” long (3.5” with cable gland) x 1.5” wide x 1.4” deep
|
|
PVD3D2N, Proportional Valve Driver, two PWM solenoid outputs, Sealed Plastic Enclosure
Benefits and Features:
• Versatile digital design
• Large, easy-to-use adjustments and 3-digit seven-segment LED display
• Wide range of supply voltage
• Electronic limiting circuit / short circuit proof
• Load can be connected & disconnected live
• Protected against wrong connection
• Simple control with analog input, the reference voltage is locally supplied
• Energy efficient PWM circuit, no heat sink is required
• Current sensing maintains output regardless of changes in supply voltage and coil resistance
• Plastic box with clear lid
• Three PG9 liquid-tight cable glands for power, signals and coils
Specifications:
• Operating voltage: 9 - 35VDC
• Maximum output: 3A
• Ramp time: 0.0 to 99.9s
• Linearity: 0.5%
• Protection grade: NEMA 4X
• Input signal: user selectable 0-5V, 0-10V, 0-20mA or 4-20mA
• PWM / Dither frequency: 50-500Hz
• Operating temperature: -40° to +75° Celsius
• Size: 4.75” long x 2.25” deep x 3.15” wide (4.15” with cable glands)
|
|
PVD3D2R, Proportional Valve Driver, two PWM solenoid outputs, DIN rail mount
Benefits and Features:
• Versatile digital design
• Large, easy-to-use adjustments and 3-digit seven-segment LED display
• Wide range of supply voltage
• Electronic limiting circuit / short circuit proof
• Load can be connected & disconnected live
• Protected against wrong connection
• Simple control with analog input, the reference voltage is locally supplied
• Energy efficient PWM circuit, no heat sink is required
• Current sensing maintains output regardless of changes in supply voltage and coil resistance
Specifications:
• Operating voltage: 9 - 35VDC
• Maximum output: 3A
• Ramp time: 0.0 to 99.9s
• Linearity: 0.5%
• Input signal: user selectable 0-5V, 0-10V, 0-20mA or 4-20mA
• PWM / Dither frequency: 50-500Hz
• Operating temperature: -40° to +75° Celsius
• Size: 3.00” x 2.75” x 1.50”
|
|
|
The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Valves. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation.
|
|
|
The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Valves. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation.
|
|
|
The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Valves. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation.
|
|
The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Valves. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation.
|
|
|
The Quartz explosion/flame proof design is FM/CSA approved and ATEX certified for use in hazardous environments. And with the epoxy coated anodized aluminum enclosure it may be used in corrosive heavy wash down areas as well.
|
|
|
The Quartz explosion/flame proof design is FM/CSA approved and ATEX certified for use in hazardous environments. And with the epoxy coated anodized aluminum enclosure it may be used in corrosive heavy wash down areas as well.
|
|
|
The Quartz explosion/flame proof design is FM/CSA approved and ATEX certified for use in hazardous environments. And with the epoxy coated anodized aluminum enclosure it may be used in corrosive heavy wash down areas as well.
|
|
|
The Quartz explosion/flame proof design is FM/CSA approved and ATEX certified for use in hazardous environments. And with the epoxy coated anodized aluminum enclosure it may be used in corrosive heavy wash down areas as well.
|
|
The Control is a PID controller that makes any solenoid valve "intelligent", the choice of solenoid valve depending on the user's application (from among the 601, Posiflow, Preciflow solenoid valves etc), and on the installation, which may be in a critical environment.
The Control can control 2 loops in the same manufacturing process, whether they are open, closed or double (cascaded). For instance:
- In an open loop: the Control adjusts the valve's pressure or flow rate (without a sensor) by measuring the feedback value.
- In a closed loop: the Control continuously compares the set pressure or flow with the set point thanks to a signal emitted by the sensor. The benefits? Very precise control (hysteresis of 1%) that reacts to external interference
- In a double loop (with 2 sensors): the first loop adjusts the valve's pressure or flow for optimum control, while the second loop returns the signal of the relevant feedback value (pressure, position, force etc). Because the process's response time is integrated into the control process as a whole, the latter is more stable.
|
|
General Description
The D3C and D3D Series directional control valves are high-performance, 4-chamber, direct operated, cam controlled, 3 or 4-way valves. They are available in 2- position and conform to NFPA?s D05/CETOP 5 mounting patterns.
Features
Choice of 2 cam roller positions (D3C and D3D)
Short stroke option
High flow, low pressure drop design
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
ASCO's solenoid valve controllers (Valve Monitoring Controller) are a line of position indicators for linear and quarter-turn applications. This is a key component for automating your process valve package. The VMS line can easily communicate as a node over a fieldbus network.
ASi Network Card All of ASCO's VMS products are available with Actuator Sensor Interface capability. This 2-wire ASi versions are EMC tested and ASi Certified.
DeviceNet Network Card DeviceNet is available on all VMS products. It is available with or without diagnostics depending upon your needs. ASCO's DeviceNet products are all ODVA Certified.
Profibus PA Network Card All of ASCO's VMS products are available with Profibus PA Network Cards. This high level fieldbus system comes in IS and non-IS versions with diagnostics. ASCO's Profibus PA Network Cards have all been EMC tested and are certified by Profibus International.
|
|
VOLUTRONIC® - that means high-dynamic, precise volume and flow measurements, evaluated according to the application - from a simple display unit to an intelligent micro-controller solution.
The basis for all this is the KRACHT gear type flow meter. This flow measure product presents the successful result of our long-experienced engineers. The sophisticated tooth system geometry in connection with application-specific bearings are made for the gear type flow meter being an absolute "All-rounder". The gear type flow meter covers a wide medium range: to go from hydraulic oil to printing ink, from gear grease to water based lacquer. The highly-efficient KRACHT electronics take the signals given by the gear type flow meter and ensures that processes are exactly monitored, regulated and controlled.
For example, in process technology as micro-controller for metering and mixing systems, or as flexible measuring and recording electronics for differentiated applications in test bench technology. KRACHT know-how guarantees functional solutions - standardized and optimized for application.
|
|
Function:
The Proportional Valve Driver supplies a
solenoid with a current proportional to the
input signal from a potentiometer, PLC or
other control system.
Features/Benefi ts:
n Microcontroller design
n Independent adjustments
n Two digit seven segment LED display
n Large, easy-to-use adjustments and readout
protected with a clear removable cover
n Wide range of supply voltage
n Reverse polarity protected
n Simple control with analog input,
reference voltage is locally supplied
n Energy effi cient PWM circuit
n No heat sink required
n Current sensing maintains output regardless of
changes in supply voltage and coil resistance
n Electronic limiting circuit/short circuit proof
n Load can be connected & disconnected live
n Mounting Options: DIN 43650 connector, DIN
rail or plastic enclosure
n Easy troubleshooting/cable length not an issue
|
|
Presenting several types of contollers, that are used together with multi-control valves or general control valves. Particularly the multi-purpose controllers of the SC/SP-F70 series are designed for the multi-control valves of the MC series.
Ensures Reliable Equipment Operation
Multi-purpose Controllers (SC-F70/SP-F70) employ TLV proprietary algorithms for MC series high precision control (active controller and actuator).
Free Voltage
Rated voltage free between 100 and 240V AC.
Application Areas
- For high precision control valves for steam or vacuum steam: Multi-purpose controller
- For storing the set value patterns in memory on any of the control valves: Programmable multi-purpose controller
- For multi-purpose control valves, etc: Multi-purpose controller, Programmable multi-purpose controller, Digital indicator controller.
|
|
Neles SwitchGuard™ intelligent on/off valve controller
Neles SwitchGuard™ is a top class intelligent on/off valve controller designed to operate on every valve actuator and in all industry areas.
It's integrated design, large pneumatic capacity and unique embedded diagnostic features guarantees high availability for your on/off applications.
SwitchGuard is a reliable and future-proof investment, and especially with Neles FieldCare™ it helps planning maintenance before the onset of problems
that could have a major impact on the process.
|
|
At ITT Water & Wastewater we produce practical and easy to use monitoring and control systems for many different pump and mixer applications. Our systems offer reduced operational costs, total overview, less report handling and better environmental control.
As well as supplying the hardware, such as pump controllers, sensors, electrical start equipment and cables, we also have software for running the system. The ITT Water & Wastewater AquaView SCADA system provides precise and effective monitoring and control.
Each control system comes with a host of well-thought-out functions. Good examples are comprehensive pump control functionality, advanced supervision of pump condition, accurate flow calculation and cleaning functionality. All functionalities are based on international experience in municipal wastewater.
|
|
Bray Controls is proud to introduce the controller of state of the taps Brayline series 50, preceding the future methods of indication of position of the taps. The great experiment of Bray on the ground and a research and development intensives led to the development of general-purpose interruptory controllers of first order, intended for industrial automation. The controllers of series 50 send a signal of position of the actuator and tap to local and remote stations. The standard appliances 50-0400 have an aluminum castings case under pressure, waterproof (NEMA 4,4X). The cases of series 50-0700 are also out of aluminum castings under pressure, waterproof and explosion-proof (NEMA 4,4X, 7,9).
The apparatuses were designed in order to facilitate wiring and for a large variety of switches. The two series are characterized by internal parts of high-quality, the same robustness and same reliability.
|
|
The Universal Power Cell uses Hall Effect sensors that are not affected by odd waveshapes or frequencies. Also, no Voltage or Current Transformers are used.
The UPC is field scalable to match your pump motor. Complete information at loadcontrols.com.
The PMP-25V Pump Load Control takes the 0-10 volt load signal from the UPC, displays the Pump Load, and has the Set Points, Timers and Relay and Analog Outputs.
|
|
Automation of pumps and valves helps to cut costs on a permanent basis and safeguards the reliable operation of your installations.
PumpDrive is the first variable speed control system that comes in a uniform housing design for three mounting methods and offers the user a comprehensive solution across a wide performance range. It allows quick, precise and continuously variable speed adjustment of a pump's drive. Thanks to absolutely reliable rotational speed optimization in line with demand, energy savings to the tune of 50% can be achieved.
LevelControl is an intelligent level control unit for single or double pump systems in applications that require reliable level control. LevelControl monitors and documents switching cycles. It ensures even distribution of pumping hours and optimum pump operation. This reduces downtime, maintenance and servicing.
PumpExpert combines three elementary functions. It is the first diagnostic system capable of issuing clear recommendations for action in the event of a disturbance or malfunction.
|
|
Pressure/Flow Controller ED1 resp. SD1
Optionally usable as pressure relief, pressure reducing, 2-way flow controller
or 3-way flow controller
Connection of proportional throttle pressure relief or pressure reducing valves
Connection of an analogue pressure-, flow- or speed sensor
Parametering by means of front keyboard, operating terminal or software
|
|
| ... products without technical information |
| |
|
