|
|
Series 700 - Variable Speed Pumping Systems
Benefits:
- Total System Responsibility
- 3 Year Waranty
- Competitive Price
- Save Money
- Low Cost Installation
- Easy to Install
- Easy to Use
- Easy to Upgrade
- Increase Reliability
- Increase System Security
Application:
- Commercials Buildings
- Hospitals
- Airports
- Municipal Water Installations
- sewage Treatment Plants
|
|
A feature packed compact Advanced Lubrication Controller for small and medium lubrication systems.
The VIP5 controller has been designed with an extensive set of parameters that offer unrivalled ease and flexibility for controlling and monitoring your automatic lubrication system - from a simple timed system, injector, progressive or dual line system.
Three operating modes have been designed into the VIP5 to offer control possibilities not found elsewhere in single, compact and affordable unit.
No need for many different version of controllers any longer - the VIP5 does it all.
|
|
Standard Composition
- 1 IP55 RAL 7032 METAL CASE
- 1 MAIN SWITCH WITH DOOR WITH FUSES
- 1 AC3 class ELECTROMAGNETIC SWITCH
- 1 3-PHASE THERMAL RELAY WITH MANUAL RESET
- 2 TRANSFORMER PRIMARY PROTECTION FUSES
- 1 SAFETY TRANSFORMER FOR LOW VOLTAGE AUXILIARIES
- 1 MAINS VOLTAGE LAMP
- 1 MOTOR RUNNING LAMP
- 1 THERMAL CUTOUT RELEASED LAMP
- 1 TERMINAL BOARD FOR WEEKLY TEST PREPARATION
- 1 AUTOMATIC-Ø-MANUAL SELECTOR
- 1 REMOTE SIGNALLING OF: pump in automatic position, pump excluded, pump in manual position
|
|
Hubbell Fire pump Motor Controllers are designed to comply with the latest standard of the National Fire Protection Association for the installation of stationary pumps for fire protection (NFPA-20).
LXi Microprocessor Logic & Control
Coordinated design engineered, built, tested and labeled by one manufacturer
Suitable for use as service entrance equipment
Full compliment of visual indicators
Communications port
LCD display shows simultaneous reading of all phases for amps and volts, and system pressure
Full range of horsepower ratings and voltages
Ample cable bending space
|
|
EPC Servo Controller
EPC is an acronym for Electronic Pump Controller. However it is much more than a simple pump controller. The EPC Servo Amplifier Module is a micro controller-operated component that can be applied to operate servo or proportionally operated pumps and valves. Because of it's onboard microprocessor this unit can perform many additional functions that your typical Servo Amplifier can not. The unit can be configured for several types of control applications including:
- Flow Control
- Flow Control with Pressure Limit
- Flow Control with System Horse Power Limit
- Pressure Control
- Pressure Control with Flow Preset
- Closed Loop Speed Control
- Load Sense Control
|
|
|
The iQpump® controller was designed with the pump service operators and pump system owners in mind. iQpump® offers ease of setup and comprehensive pump and motor protection features. The integrated pump specific software and setup parameters, allow the operator to setup specific control values for a wide rantge of applications. The iQpump® controller will automatically adjust pump operating conditions conditions, as the process variables change while still maintaining optimum pump performance and protection. iQpump® can also replace phase converters when converting from a single phase to a three phase pump motor.
|
|
Features
- Operates on 24 VDC
- Increases daily water output up to 30%
- System starts pumping earlier in the morning
- System stops pumping later in the evening
- Protects pump from low or high voltage conditions
- Terminals for float switch
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.
|
|
|
Variable frequency drive controllers specifically designed for pumping systems. May be used to reduce electricity cost by up to 70% over fixed speed pumps in most applications. Self contained pump mounted or panel mounted control systems designed for standard pump and motor combinations.
|
|
At ITT Water & Wastewater we produce practical and easy to use monitoring and control systems for many different pump and mixer applications. Our systems offer reduced operational costs, total overview, less report handling and better environmental control.
As well as supplying the hardware, such as pump controllers, sensors, electrical start equipment and cables, we also have software for running the system. The ITT Water & Wastewater AquaView SCADA system provides precise and effective monitoring and control.
Each control system comes with a host of well-thought-out functions. Good examples are comprehensive pump control functionality, advanced supervision of pump condition, accurate flow calculation and cleaning functionality. All functionalities are based on international experience in municipal wastewater.
|
|
|
Bray Controls is proud to offer the Brayline series 50 Valve status Monitor, the future of valve position signaling. Bray's extensive field experience, research and development has produced the finest multipurpose switch/control monitors for industrial plant automation.
|
|
The Universal Power Cell uses Hall Effect sensors that are not affected by odd waveshapes or frequencies. Also, no Voltage or Current Transformers are used.
The UPC is field scalable to match your pump motor. Complete information at loadcontrols.com.
The PMP-25V Pump Load Control takes the 0-10 volt load signal from the UPC, displays the Pump Load, and has the Set Points, Timers and Relay and Analog Outputs.
|
|
ELECTRONIC CONTROL FEATURES
100% duty cycle
Superior Accuracy (1/2% over full range)
Compact electronic and mechanical design
No clutches or brakes
Multiple size plunger / flow capability
Severe duty design standard
Local micrometer stroke indication
Split signal capacity (standard, field adjustable)
Direct or reverse acting (standard, field adjustable)
Each side can operate independently or in unison
Adjustable feedback signal to tune output
Low maintenance
No overshoot or hunting
Wall and panel mount remote controllers (w/indication) available
|
|
| ... products without technical information |
| |
|
|
|
|
IPS 9000
Armstrong’s Integrated Pumping System (IPS) automatically ensures delivery of required pumping capacity to match key building loads, while maintaining pumping energy costs at a minimum. With the use of system load detectors, such as differential pressure sensors, at one or more remote load locations, the Armstrong IPS automatically and continuously provides just the required flow for the current needs. HVAC system load requirements vary considerably during a typical day. Considerable energy savings result when pumping capacity is continuously matched to the load. Pumps may be operated as 100% standby or in a multiple pump, staged parallel sequence. Armstrong’s IPS can control as many as six (6) pumps in parallel, with up to eighteen (18) remote system load sensors. Dedicated or shared Variable Frequency Drives (VFDs) may be used, with or without power bypass systems. Armstrong offers the most advanced IPS available, with the flexibility to meet the most demanding pumping applications.
|
|
|
|
see the results for the following category : 
