|
|
|
|
|
|
The Control is a PID controller that makes any solenoid valve "intelligent", the choice of solenoid valve depending on the user's application (from among the 601, Posiflow, Preciflow solenoid valves etc), and on the installation, which may be in a critical environment.
The Control can control 2 loops in the same manufacturing process, whether they are open, closed or double (cascaded). For instance:
- In an open loop: the Control adjusts the valve's pressure or flow rate (without a sensor) by measuring the feedback value.
- In a closed loop: the Control continuously compares the set pressure or flow with the set point thanks to a signal emitted by the sensor. The benefits? Very precise control (hysteresis of 1%) that reacts to external interference
- In a double loop (with 2 sensors): the first loop adjusts the valve's pressure or flow for optimum control, while the second loop returns the signal of the relevant feedback value (pressure, position, force etc). Because the process's response time is integrated into the control process as a whole, the latter is more stable.
|
|
LS-C41
Hybrid PID Controller/Driver
The LS-C41 is a complete, high-speed, high-accuracy analog PID controller paired with an efficient PWM-based valve driver to maximize the performance of the LS and M2 Valves.
Features:
* Mutiple PID and Feed Forward Options
* "Nested Loop" Control Architecture
* Adjustable Dither Frequency and Amplitude
* Adjustable Dead-Band Compensation
|
|
LS-C10
Proportional Controller/Driver
The LS-C10 combines a proportional closed-loop controller with a proportional high current driver. Designed to optimize the performance of the LS and M2 valves, the LS-C10's driver can also control other current driven devices.
Features:
* Proportional Gain Adjustment
* Analog Response and Resolution
* 2 kHz Dither with Adjustable Amplitude
* Regulated Linear Current Output
|
|
|
|
|
|
The Control is a PID controller that makes any solenoid valve "intelligent", the choice of solenoid valve depending on the user's application (from among the 601, Posiflow, Preciflow solenoid valves etc), and on the installation, which may be in a critical environment.
The Control can control 2 loops in the same manufacturing process, whether they are open, closed or double (cascaded). For instance:
- In an open loop: the Control adjusts the valve's pressure or flow rate (without a sensor) by measuring the feedback value.
- In a closed loop: the Control continuously compares the set pressure or flow with the set point thanks to a signal emitted by the sensor. The benefits? Very precise control (hysteresis of 1%) that reacts to external interference
- In a double loop (with 2 sensors): the first loop adjusts the valve's pressure or flow for optimum control, while the second loop returns the signal of the relevant feedback value (pressure, position, force etc). Because the process's response time is integrated into the control process as a whole, the latter is more stable.
|
|
General Description
The D3C and D3D Series directional control valves are high-performance, 4-chamber, direct operated, cam controlled, 3 or 4-way valves. They are available in 2- position and conform to NFPA?s D05/CETOP 5 mounting patterns.
Features
Choice of 2 cam roller positions (D3C and D3D)
Short stroke option
High flow, low pressure drop design
|
|
| ... products without technical information |
| |
Guard Locking Tongue Switch - Type KLM
Designed to fit to hinged or sliding guards to provide high mechanical holding force and safety interlocking where it is required to protect the operator from moving machinery.
A unique internal mechanism design provides up to 4NC 2NO contacts and provides independent monitoring of the locking mechanism and the tongue position.
2 LED's provide Status of the Solenoid and Door Locked
Can be used with a Safety Relay to provide EN954-1 Cat.4 protection.
Rugged Die Cast housing - IP67 enclosure protection and optional Stainless Steel Head.
Provides Guard Holding up to 3000N (300Kg)
Spring to Lock - Solenoid operate to release
Conduit entry M20 or ½" NPT
Solenoid Voltages available: 24V. ac/dc 110V.ac 230V.ac
Flexible actuator available.
|
|
AZM range solenoid interlocks, operating in combination with control elements of a machine, e.g. fail-safe standstill monitors or fail-safe delay timers, ensure that sliding, hinged and removable guarding devices, such as grids , hoods or doors, cannot be opened until hazardous conditions (e.g. running-down movements) have come to an end.
These solenoid interlocks are also used for cases in which the opening of a guarding device represents a non-permissible intrusion in a production process.
In combination with AES and AZR range safety monitoring modules, the AZM range solenoid interlocks achieve Control Category 3 or 4 to EN 954-1, subject to suitable circuit arrangements. Examples of circuits for solenoid interlocks are shown in the Schmersal Control Circuit and Applications Handbook.
Schmersal make both standard and AS-i Safety at Work solenoid interlocks.
Click here to see the AS-i models
Or for the standard models click below
|
|
RTK*E
* From 1 to 6 key slots
- Without contacts, this rotating lock is used to block circuit breakers, differential circuit breakers, accesses, ...
-Equipped with contacts permits blocking of command circuits (2O-2F) or power circuits (3O-1F up to 22KW)
- There are various versions available based on the application needs
Positive safety: Opening of the circuit by extraction related to the handling of the key.
Key logic:
%u2022 Without contacts, cam action
%u2022 1 Key: Held Key, 2 contacts
open, 2 contacts closed
%u2022 Various keys: Associative functioning ( )
%u2022 Various keys: Interchange functioning ( / ) (A keys free, B keys held)
|
|
|
|
|
|
Magsafe is Smartscan’s latest innovation in machine safety. An electro-magnetic interlocking system for controlling personnel access through the gates and doors set within the perimeter safety fencing or screens surrounding potentially hazardous machinery.
The key design element in Magsafe was to lock the door using magnetic force rather than by mechanical means and to remove the problems that plague existing gate locks due to liquid and dirt exposure in combination with the rigors of daily operation. This causes fatigue and leads to mechanical failure of the product. The ability to withstand harsh industrial environments such as water, dust and corrosive liquids Magsafe is the perfect solution for most guard locking applications.
In addition to this Smartscan has applied its safety light curtain technology background to the safety gate interlocking market by providing a system control unit which continuously monitors the on and off state of the magnets. This ensures the system detects when the gate is open and when it is closed. Only when the gate is closed and the magnetic locking force applied, will the control system allow machine operation.
|
|
Designed to control access to the dangerous or protected areas, this device is installed in any kind of door, gate, housing, and permits remote unlocking from a distance.
Equipped with a forced opening contact, it permits the detection when the access is closed again.
|
|
|
|
|
|
NEWS 2009
SAFETY HANDLES P-KUBE LINE
Thanks to the experience in the field of safety switches, Pizzato Elettrica introduces an innovative line of safety handles called P-KUBE.
This new line represents the answer to practical issues that the operators have with the application of safety switches on machinery guards, like the ease of installation, the precise mechanical movements of the guard, the occurrence of critical environmental conditions, the presence of inattentive staff.
Unlike other products on the market, the basic principle of this series provides that the operator can enter and exit the danger zone with simple and natural movements by avoiding the locks to bolt. Its special design and materials allow the safety handle to be used in heavy applications or with sturdy protections.
The safety handles P-KUBE line distinguishes itself by the following main features:
- Easy installation and easy functioning: to open or close the door there are only intuitive actions needed.
- Handle provided with a self-centering sturdy metal pin in order to have the alignment between the jamb and the door: this device works also as a door mechanical stop.
- Possibility to assemble it on swing and sliding doors.
- Possibility to adjust the handle on 3 different axis through slotted brackets.
- Optional Lock-out device with padlocks to avoid the unwanted or accidental closing of the protection by the insertion of the actuator in the switch.
- Compatible with switch FD series with separate actuator and switch FG series with solenoid.
|
|
|
|
|
|
IDEM has launched The Kobra 'Hygiecam' KL3-SS , the world's first Solenoid Locking Tongue Interlock Switch in a fully Stainless Steel 316 housing. The switch has a mirror polished finish and is designed to cope with the rigorous high pressure hose cleaning demands of food and beverage manufacturing industries.
The KL3-SS is a compact, slimline locking switch designed to fit to all general applications.
The housings are IP69K rated and provide guard locking for medium to heavy duty guards (up to 3000N.).
The head is rotable to provide 8 actuator entry positions and all fittings including the actuators are made from Stainless Steel 316 to provide tough mechanical and environmental durability.
The switch is released by applying power to the solenoid after the machine is stopped.
A uniquely designed mechanism means that 2 sets of positively driven contacts are provided to monitor the actuator position and the solenoid status independently.
4NC Safety and 2NO auxiliary circuits are provided plus there are 2 LED's to provide independent diagnostics for the solenoid status and the actuator lock status.
|
|
Guard Locking Tongue Switch - Type KLM
Designed to fit to hinged or sliding guards to provide high mechanical holding force and safety interlocking where it is required to protect the operator from moving machinery.
A unique internal mechanism design provides up to 4NC 2NO contacts and provides independent monitoring of the locking mechanism and the tongue position.
2 LED's provide Status of the Solenoid and Door Locked
Can be used with a Safety Relay to provide EN954-1 Cat.4 protection.
Rugged Die Cast housing - IP67 enclosure protection and optional Stainless Steel Head.
Provides Guard Holding up to 3000N (300Kg)
Spring to Lock - Solenoid operate to release
Conduit entry M20 or ½" NPT
Solenoid Voltages available: 24V. ac/dc 110V.ac 230V.ac
Flexible actuator available.
|
|
AZM range solenoid interlocks, operating in combination with control elements of a machine, e.g. fail-safe standstill monitors or fail-safe delay timers, ensure that sliding, hinged and removable guarding devices, such as grids , hoods or doors, cannot be opened until hazardous conditions (e.g. running-down movements) have come to an end.
These solenoid interlocks are also used for cases in which the opening of a guarding device represents a non-permissible intrusion in a production process.
In combination with AES and AZR range safety monitoring modules, the AZM range solenoid interlocks achieve Control Category 3 or 4 to EN 954-1, subject to suitable circuit arrangements. Examples of circuits for solenoid interlocks are shown in the Schmersal Control Circuit and Applications Handbook.
Schmersal make both standard and AS-i Safety at Work solenoid interlocks.
Click here to see the AS-i models
Or for the standard models click below
|
|
RTK*E
* From 1 to 6 key slots
- Without contacts, this rotating lock is used to block circuit breakers, differential circuit breakers, accesses, ...
-Equipped with contacts permits blocking of command circuits (2O-2F) or power circuits (3O-1F up to 22KW)
- There are various versions available based on the application needs
Positive safety: Opening of the circuit by extraction related to the handling of the key.
Key logic:
%u2022 Without contacts, cam action
%u2022 1 Key: Held Key, 2 contacts
open, 2 contacts closed
%u2022 Various keys: Associative functioning ( )
%u2022 Various keys: Interchange functioning ( / ) (A keys free, B keys held)
|
|
|
|
|
|
Magsafe is Smartscan’s latest innovation in machine safety. An electro-magnetic interlocking system for controlling personnel access through the gates and doors set within the perimeter safety fencing or screens surrounding potentially hazardous machinery.
The key design element in Magsafe was to lock the door using magnetic force rather than by mechanical means and to remove the problems that plague existing gate locks due to liquid and dirt exposure in combination with the rigors of daily operation. This causes fatigue and leads to mechanical failure of the product. The ability to withstand harsh industrial environments such as water, dust and corrosive liquids Magsafe is the perfect solution for most guard locking applications.
In addition to this Smartscan has applied its safety light curtain technology background to the safety gate interlocking market by providing a system control unit which continuously monitors the on and off state of the magnets. This ensures the system detects when the gate is open and when it is closed. Only when the gate is closed and the magnetic locking force applied, will the control system allow machine operation.
|
|
Designed to control access to the dangerous or protected areas, this device is installed in any kind of door, gate, housing, and permits remote unlocking from a distance.
Equipped with a forced opening contact, it permits the detection when the access is closed again.
|
|
|
|
|
|
NEWS 2009
SAFETY HANDLES P-KUBE LINE
Thanks to the experience in the field of safety switches, Pizzato Elettrica introduces an innovative line of safety handles called P-KUBE.
This new line represents the answer to practical issues that the operators have with the application of safety switches on machinery guards, like the ease of installation, the precise mechanical movements of the guard, the occurrence of critical environmental conditions, the presence of inattentive staff.
Unlike other products on the market, the basic principle of this series provides that the operator can enter and exit the danger zone with simple and natural movements by avoiding the locks to bolt. Its special design and materials allow the safety handle to be used in heavy applications or with sturdy protections.
The safety handles P-KUBE line distinguishes itself by the following main features:
- Easy installation and easy functioning: to open or close the door there are only intuitive actions needed.
- Handle provided with a self-centering sturdy metal pin in order to have the alignment between the jamb and the door: this device works also as a door mechanical stop.
- Possibility to assemble it on swing and sliding doors.
- Possibility to adjust the handle on 3 different axis through slotted brackets.
- Optional Lock-out device with padlocks to avoid the unwanted or accidental closing of the protection by the insertion of the actuator in the switch.
- Compatible with switch FD series with separate actuator and switch FG series with solenoid.
|
|
|
|
|
|
IDEM has launched The Kobra 'Hygiecam' KL3-SS , the world's first Solenoid Locking Tongue Interlock Switch in a fully Stainless Steel 316 housing. The switch has a mirror polished finish and is designed to cope with the rigorous high pressure hose cleaning demands of food and beverage manufacturing industries.
The KL3-SS is a compact, slimline locking switch designed to fit to all general applications.
The housings are IP69K rated and provide guard locking for medium to heavy duty guards (up to 3000N.).
The head is rotable to provide 8 actuator entry positions and all fittings including the actuators are made from Stainless Steel 316 to provide tough mechanical and environmental durability.
The switch is released by applying power to the solenoid after the machine is stopped.
A uniquely designed mechanism means that 2 sets of positively driven contacts are provided to monitor the actuator position and the solenoid status independently.
4NC Safety and 2NO auxiliary circuits are provided plus there are 2 LED's to provide independent diagnostics for the solenoid status and the actuator lock status.
|
|
|
|
see the results for the following category : 
