|
|
| ... products without technical information |
| |
|
The Fx4 can be programmed to meet any function required by the OEM. It can also be supplied to work with any voltage ranging from 5V AC/DC to 240V AC. If you have a requirement that is not covered by any our standard products, please complete our ICS form.
|
|
Our newest member of the Lean family is the Lean-Veyor Wash System. It is designed to be the most energy efficient parts washing machine on the market. This high performance in-line conveyor washer has a wash and blow-off in one small package.
The Lean-Veyor reduces floor space requirements while providing exceptional cleaning and drying performance. Engineered for lean/cellular manufacturing, the Lean-Veyor's ergonomic and high energy design provides one of the best cleaning performance on the market today.
Ransohoff's new Lean-Veyor (1524mm. wide x 2133mm. long x 1372mm high) comes in a two-tone standard color of Grays with a premier option of Polished Stainless Steel.
The Lean-Veyor simplifies maintenance through a common sense approach to component choice and placement for quick and efficient access and servicing. It has sliding housing doors for easy interior access (NO GASKETS). Stainless steel quick release spray risers. Lift off door panels for easier maintenance and a pressure gauge at the filter to let the operator know when to change the bag in the filter.
The entire unit has been thoughtfully engineered and manufactured from the ground up to be flexible, durable, simple to use and easy to maintain
|
|
A two basket rotary flood and spray wash,rinse and dryer giving high quality cleaning.
The machine has a small footprint ideal for cell type manufacturing
|
|
PID with Time / Temperature Profiling Controllers
FEATURES:
- Total 9 profiles, a profile with 16, 32 or 64 segments at most
- Each segment to be configured as a ramp or dwell(soak)
- After an event the process goes to run, hold, abort, manual, failure
transfer, off mode, next segment or select the second PID values
- High accuracy of 18-bit A to D input, and 15-bit D to A output
- The fast sample rate of 200 msec
- Fuzzy control to reach set point at the least overshooting ans less time
- Up to three relays are configurable for event output
- Analog retransmission of process value & set point value
- Optional RS-485 or 232 communications
- Programmable port for easy configuration or calibration
- Lockout protection for security requirement
- Bumpless transfer of safely control while sensor breaks
- Digital filter to improve the stability of process value
- SEL function for easy operation
** Please visit us at coming exhibition TAITRONICS Taipei 2008 at stand I-0328 during October 7-11.
|
|
These are advanced controls offering the ramp/soak programmability with PID control outputs.. It is possible to control the temperature as per the desired rate of heating / cooling with the required soaking time. Different models offers different features with the facility to program 1 to 10 patterns of sixteen ramp/soak steps, which can be permanently stored in the internal non-volatile memory. The controller accepts Thermocouple or Pt-100 or mV/mA signal as the input and provides control output in the form of DC pulse, 4-20mA, 0-5V etc.. to operate various control devices such as Relay, Contactors, Motorized valves, Thyristor power pack etc...
All the models are available with serial RS485 output on MODBUS protocol and can be hooked to the computer. The supporting window based software allows programming of controller through PC as well as for on-line monitoring and storage of ramp/soak heating cycles. These controllers can be customized with dedicated logic control for special purpose heat treatment applications such as hardening, annealing, tampering etc...
|
|
DESCRIPTION:
Libratherm offers Microprocessor based Eight Zone PID Temperature indicator / Controller (Model PRC-8000)where accurate temperature control of multiple zone during Gradual Heating and Cooling is required. Each zone can be independently programmed for 16 steps of Ramp/Soak profile. Each loop parameters like PID, Hysteresis, Deviation Hold, Facility to skip unused channel etc can be programmed from the user-friendly front panel membrane keyboard.
PRC 8000 accepts 8 Thermocouples or RTD(Pt-100)3 wire inputs and can provide switching PID or ON/OFF Control output in the form of DC Pulses or SSR or relay to drive external load contactors. It can simultaneously provide 8 analog PID control outputs in the form of (4-20)mA or (0-5)volt, which can be used to control heater power through Thyristor power pack.
PRC-8000 is ideally suited for on line pre and post welding heat treatment cycle. Where the large size jobs are heated by local heating pads. Temperatures are sensed using 6 to 8 K type thermocouples fitted at different points. The common program is run for all inputs and to ensure the uniform heating cycle, the PRC-8000 offers special feature of common or individual deviation hold facility, thereby the guaranteed ramp/soak controlled is achieved. Libratherm offers ready to use panel with input/output and supply connections.
The serial interface of RS-485 in Modbus protocol is also available for operating the controller from remote computer, SCADA or DCS system.
|
|
The p2000 is an electrical resistance tomography instrument. The instrument operates by taking data from an array of 16 electrodes in contact with the process media. These are either mounted on a baffle / dip-pipe or around the circumference of the pipe or vessel. These data are processed to provide a conductivity map of the sensing zone.
In contrast to many systems-based measurement techniques, tomography sensors are able to rapidly sense throughout a volume. Thus providing a dynamic picture of what is going on inside a pipe or vessel, e.g. whether
a system is homogeneous.
|
|
The m3000 instrument is the only commercial tomography system that provides dual capacitance and resistance modality. This allows users to visualize multi-component systems such as air / oil / water in real time.
Using its dual modality function, the m3000 can monitor processes which move from conducting to non-conducting in the continuous medium.
In contrast to many systems-based measurement techniques, tomography sensors are able to rapidly sense throughout a volume. Thus providing a dynamic picture of what is going on inside a pipe or vessel, e.g. whether a system is homogeneous.
|
|
The m3000c is an Electrical Capacitance Tomography instrument that is suitable for a wide range of research applications. The instrument operates by taking data from an array of 12 electrodes which can be non intrusive.
In contrast to many systems-based measurement techniques, tomography sensors are able to rapidly sense throughout a volume. Thus providing a dynamic picture of what is going on inside a pipe or vessel, e.g. whether a system is homogeneous.
|
|
The z8000 is an Electrical Impedance Tomography instrument. The z8000 is essentially a resistance tomography instrument that can also measure impedance; phase and reactance. Impedance can measure real and imaginary parts, which gives another set of data to understand complex materials and how they are distributed in the course of a process.
The z8000, can capture data 1,000 dual frames persecond, which enables it to measure rapid flows or any process which is fast moving.
|
|
Electrical Resistance Tomography Linear Sensors.
ERT sensors comprise of multiple electrodes which must make electrical contact with the fluid within the process volume. The most common geometry is a circular sensor with the electrodes arranged uniformly around the circumference.
Electrical Capacitance Tomography Sensors
ECT sensors comprise of multiple electrodes arranged around the circumference of a pipeline. The most common arrangement is for external electrodes mounted on a section of non-conducting pipe with an external earthed screen. The electrodes can be etched from flexible copper coated laminate. This arrangement has the advantage that the electrodes are non-invasive and non-intrusive.
Dual Modality Sensors
ITS have developed dual-modality ERT and ECT pipeline sensors with co-located electrodes for use with the m3000 system. These have internal ERT electrodes and external ECT electrodes.
|
|
The new Moflash "Spectrum 600" LED Beacon offers the option of 3 colours in one enclosure (Red, Amber and Green). The Spectrum 600 also incorporates a Piezo Buzzer offering an additional audible signal option. The unit offers a total of 28 signal combinations for PLC controlled operation. An optional interface unit is available for non-PLC operation and offers 8 pre-set signals.
|
|
|
|
