|
|
|
|
|
|
The measuring microscope is a multifunctional microscope measuring system which integrates optical, mechanical, electrical and video elements. It provides eye piece magnifying, visual display magnifying, input and output data processing functions. The observation system includes three types: single eyepiece, double eyepiece and CCD image.
The video toolmaker microscope is widely used for electronic components, precision mold, precision tool, spring, plastic rubber, oil seal valve, camera components, automobile components and PCB processing components, etc
With RS-232 communication interface connected with a computer, the microscope can input and output measuring results and save images. Special measuring software M2D-AT is used to automatically detect edges .You can measure work pieces just by clicking the mouse instead of programming, it is simple, convenient, easy to learn and suitable for needs of different users.It is mainly used to measure geometric elements such as length and angle, thread parameters, cam, gear and cutting tool (milling cutter, hobbing cutter and screw tap), cone and cylinder components, templates and hole pitch, etc. Eyepiece reticule can be used for compare measurement and coordinate measurement with magnification of the sizes and outline of the work pieces. In addition, it can be also used as a observation microscope in precision processing industry with non-contact measurement, e.g. to inspect the surface roughness via relative measuring methods.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
Product Name : Embedded Single Board Computer
Description :
3.5” Embedded Board for AMD Geode LX800 Low Power processor
With VGA/LAN/PC104/Audio/LVDS/CF/USB
Features :
★Support AMD Geode LX 800 0.9W processor, FSB 500MHz
★Bulit-in AMD Geode LX800 Chipset + Geode CS5536
★Realtek 8100C Chipset 10 / 100 Base-TX Ethernet
★Support 1 x 200 pin DDR SODIMM up to 1GB
★Realtek ALC202 Chipset, Support 5.1 Channel Audio
★Watchdog Software BIOS Setup
Specification :
★Processor: Support AMD Geode LX800 0.9W processor
★Chipset: AMD Geode LX800@0.9W chipset + AMD Geode CS5536 chipset
★Front Side Bus Speed: 500 MHz
★Memory: Support 1 x 200-pin SODIMM DDR400,up to 1GB
★VGA Interface: Improved Graphics
★LVDS Transmitter: 18-bit LVDS transmitter(optional)
support pixel rate up to 330M pixeis/sec
★USB Port: Support 2 x USB 2.0 ports
★Printer Port: Support 1 x SPP/EPP/ECP parallel port by pin-header
★Serial Port: Support 4 x COM ports, Winbond 83627 EHF COM1,
COM2 /RS232/485(optional), Fintek F81216D chipset COM3/4
★LAN Port: Realtek 8100C chipset 10/100M Fast Ethetnet
or Realtek 8100S chipset 10/100/1000 Gigabit Ethetnet(optional)
★Keyboard/Mouse: Support 1 x PS/2 Keyboard/Mouse
★Audio: Realtek ALC202 chipset support 5.1 channel audio
★Watchdog Timer: Watch Dog software BIOS setup
★Other Connector: Onboard 1 x PC/104 Plus
★Power: 12V AC to DC adapter or DC 12V input with P4 addition connector
★Dimensions(W x H): 146 x 101mm
★Operating Temperature: 0 to 60oC
★Relative Humidity: 10% to 90%(non-condensing)
|
|
CANnes
Description
CAN-Bus PCI-Card with open source Linux driver
The CANnes card is a PCI card which provides a simple, easy to use CAN interface. It is equipped with a male and a female 9 pin Sub-D connector with standard CAN pin assignments. CAN bit rates between 10 and 1000 kBit/s (1MBit/s) are possible. The industry standard CAN controller SJA1000 is used together with the CAN bus driver 82C250 and optical isolation between the CAN controller and the CAN bus driver. A 120 ohms termination resistor is also provided. This resistor can be switched on and off either by a software controlled relay. Device drivers and function libraries are provided for the Windows (98/ME/2000 and NT4) operating systems and also for the Linux operating system. The CANnes cards is CE-approved and also meets FCC specifications. It can be used with every PC which is equipped with PCI slots fulfilling at least the PCI 2.1 standard.
|
|
| ... products without technical information |
| |
Colloid mill works with shearing，grinding high-speed stirring．Grinding process occurs in the relative movement between the two teeth with one revolving in high speed and another still，which makes the material between the teeth receive strong shearing and abrasion in addition to high frequency vibration and high speed swirl．The above forces effectively evenly disperse，emulsify，smash the material.
JM-F/L is a new equipment that wet processes superfine grain．whichisusedto homogen。emulsify。mixand smash various semi-liquids．1iquids and latex emulsion.
|
|
|
|
|
|
TRL-B efficient online mixer system is the latest generation of solid and liquid, liquid and the liquid fast, efficient hybrid systems equipment. The system has powerful Central vacuum of power system to ensure operation of the system efficient, safe and reliable, but also the clever design of a set of precise and bite Rotor will close subsystems, making efficient online mixer with a variety of unique and mutual reunification of the Function. In the unique and compact structure of the system, two systems synergy, working together, so that non-homogeneous materials in a small space rapidly and thoroughly mixed and heterogeneous, and may even be a meticulous verification of stability to repeat Production results.
Applications
Food Industry: homogeneous concentrated fruit juice, long fiber drinks, soups, all kinds of jam, fruit juice, potatoes Nigeria, mustard cake;
Dairy: homogeneous fermented dairy products: You yogurt, soft cheese, butter, etc.
Heterogeneous mix milk products: such as ice cream, chocolate milk, cocoa milk, CMC, starch, Mr Jing, etc.
Biological pharmaceutical industry: tissue, cell body grinding, injection; antibiotics; drug ointment; microcapsules emulsion;
Cosmetics Industry: Emulsion various facial cream, lipstick, liquid detergent, Ximian Nai, skin care products, shampoo;
Chemical industry: resin emulsion, surfactant, carbon black dispersion; dye coating
Homogeneous production of PVC plasticizers: all kinds of emulsion agent, photographic emulsion, additives, etc.
Petrochemical Industry: emulsified asphalt; modified asphalt; heavy oil emulsified diesel emulsion; lubricants; silicone oil emulsion.
|
|
|
|
|
|
The water and powder mixer is composed of main machine boby and centrifgal pump water wheel,which are vertically installed.Through a double-layer wall pipe,the liquid materials and solid materials are separately pumped in,which can prevent them from agglomeraling before entering into the main body. When the liquid enters into the main machine body of mixer at high speed,vacuum will produce in the center of water wheel to suck the solid materials. The soild materials will be evenly sucked in through the regulation of valve under the doukou tank.It has brief design and multiple functions.lt can rapidly and evenly mix multiple solid materials without contacting the air.The mixing is enough and the product can be recycled. Under some conditions,use"online" and there is no need for recycling.Sanitary design and clamp connection with convenient assembly and disassembly.No need to dismantle any device during the cleaning and disinfecting.Mechanically close the valve to keep the inside sanitation.40°standard doukou tank.Specialty designed for manufacturers of dairy products and beverages,the equipment can be used to mix solid
materials and liquid materials in the production of syrup,Sorbitol,glucose,lactose and its side products,in the reduction of milk powder,in the solving into milk with cocoa powder or white sugar.in the solving of whey powder,in the solving into water wtih flour and starch,in the production of salt water and in the preliminary mixing of yoghurt and other dairy products.Wilh advanced design.fine manufacturing，high production efficiency and durable use,it has obtained stale patent.
|
|
TRL-C system is the use of special high-speed rotation of the rotor have a vacuum, the powder evenly inhalation chamber work, and it evenly distributed in the rapid flow of sap flow, the flow in the blink Secretary powder was completely wet, do not have a massive reunion Of. Then liquid and powder through a high-shear structure for the rotor to any possible spread of the block-poly, the last fully wet) and Yan evenly distributed the materials.
TRL-C system is a completely different treatment convcept. The sets of equipment systems integration deal with all the necessary steps, all in a fusion of all the machines are dealing with an instant at the same time completely solve the traditional equipment difficult to resolve some of the problems.
|
|
Measuring Mixers type 30/50/350
Simulate production realistically on a laboratory scale
Brabender® measuring mixers are interchangeable measuring heads which, in connection with a Plasti-Corder® Lab-Station or Plastograph®, serve for testing the processibility of thermoplastics, thermosets, elastomers, ceramic molding materials, fillers, pigments, and many other plastic and plastifiable materials under practice-oriented conditions, cost-effectively, reliably, with little expenditure of time and material.
The measuring mixers consist of a mixer backstand with gear unit and a detachable mixer bowl. In addition to the electronic safety systems, they are connected to the drive unit through a shear pin coupling protecting both mixer and drive unit from damage due to overload.
|
|
| ... products without technical information |
| |
|
|
|
|
Non-contact Vision Measuring machine is a photoelectric measuring system of high precision and efficiency. It is composed of a series of components, such as CCD color camera of high resolution, continuous zoom lens, color monitor, video crosshairs generator, precise linear scale, multi-functional Digit Readout (DRO), 2D measuring software and high precision worktable.
It is mainly applied in 2D measurement, sometimes in 3D as well. It is widely used in different kinds of precision finishing industries, such as electronic part, precision mold, precision tool, spring, screw processing, plastic, rubber, oil seal valve, camera part, pedal cycle part, motor part, conductive rubber and PCB processing. It is a must for the metric room, laboratory or workshop of various sectors concerning to machinery, electronics, gauging instrument, watch, plastic and light industry as well as academies, research institutions and measurement-inspecting department.
Rational has standard VMS-G series, advanced VMS-F series, CNC VMS-H series and so on. Rational Video measuring system is charactered with good quality, reasonable price and good after-sale services
|
|
|
|
|
|
Coordinate Measuring System can measure all basic geometrical elements such as point, line, plane, circle, arc, ellipse, cylinder, cone and sphere, easily measure 3D size, shape and position error of all components and can complete measuring of the majority work pieces of a modern manufacturer. It is mainly used in the machinery, electronics, moulds, automobiles, space and aviation industry. it has the below speciality,
1. Integrated granite working table and sliding bridge structure improve the movement performance and ensure precision and stability of the whole mechanical system.
2. High precision air bearings with pre-pressing design and free fray are adopted for all guide rails to provide more stable operation and ensure excellent dynamic performance of the machine.
3. High precision natural granite is adopted for three axis guide rails, so that the three axes have the same temperature characteristics, good rigidity and will not deform with the time going on.
4. RENISHAW self-adhesive strap metal reflection grating ruler is with high precision, good stability and convenient debugging.
5. Coordinate Measuring software Rational Dmis with powerful functions provides you with most perfect measuring solutions, simple and friendly measuring interface, which is easy to learn and use.The device is also equipped with a highly effective air processing system to ensure excellent quality of compressed air.
|
|
|
|
|
|
LMC-M-M2D-LASER for Profile-Contour Scanning
The Scanner M2D provides 2-dimensional measuring of profile heights. The measured objects may consist of various materials. A laser line is projected onto the target and the distance to several points of the object is measured by triangulation. The Scanner is suitable for the geometric profile recognition and distance measurement. The height (Z-axis) by distance (X-axis) is measured. The result is the contour of the object at the point of measurement. Every 20 ms a complete scan of 283 points of measurement, or every 40 ms a scan with 566 points of measurement is done. The measurement range works from 5...1200 mm (X-axis) and 8...600mm(Z-axis).
Typical applications
Precise guidance of handling-robots:
– disc mounting, positioning of car-bodies, gap adjustment in the automotive industry
– welding seam tracking and quality assurance
fast measurement of:
– fast moving objects
– gaps
– edges
– width and depth of slots
– 3D shapes and profiles
– SMD components in the production process
Parts handling
– collision avoidance
– object presence and positioning
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
