|
|
Mink MBS-System (MBS) - The next best thing to floating
The Mink MBS-System is superior to conventional conveyor belts, which explains why this concept is preferred by customers in so many different industries. This modular brush conveyor belt can handle products of every conceivable kind, while preventing damage and avoiding contamination and noise. The bristle surface can be adjusted to the required degree of gentleness. If repairs become necessary, individual modules can be replaced quickly and easily. The belts are highly resistant to acids, alkalis and heat.
Advantages:
• Gentler than conventional conveyer belts
• The ideal way to convey products that are susceptible to dents and scratches on inclines
• Quick and easy assembly
• Superior technology at an attractive price
• Low noise
• Dirt falls between the bristles, no damage to surfaces
|
|
|
Metso Minerals delivers the world's most comprehensive range of conveyor belts. Based on more than 100 years of experience in development, manufacture and applications know-how, Trellex belts and belt systems are designed to meet specific end-user requirements for high performance and cost-efficiency.
|
|
Stainless steel belts are appropriate for continuous conveyance in clean rooms as they generate minimal contamination in belt conveyance systems. In addition, their limited amount of vibration causes no effect on work, and their high conductivity enables electric resistance to be restrained at no more than 10 Ohm. Preventing electrostatic charge and limiting contamination to a minimum, these belts are capable of maintaining consistently clean conveyance conditions
Applications:
- Conveyance lines for disk drive units and other parts of products such as substrates
- HDD assembly conveyance lines
- Manufacturing and inspection lines of electronic parts
|
|
Carbon steel is the primary choice when a scraping blade will be in contact with the belt. The material hardness, thermal properties and magnetic characteristics of Carbon Steel provide unique features that are beneficial in a wide variety of material processing applications.
Belt Technologies Carbon Steel Process Belts are uniquely suited to the baking and chocolate industries. These belts feature remarkable wear resistance, and allow for easy system cleaning and sanitizing.
|
|
Siegling Transilon conveyor and processing belts for speeding the flow of goods and for economic processing in the light materials handling industry.
The standard Transilon construction consists of polyester fabric as tension member with synthetic or elastomer coatings. Transilon is used successfully in industrial, commercial and service companies worldwide. The standard product range includes over 120 various conveyor belt types and constructions for the most diverse of application requirements.
|
|
|
Habasit offers the broadest range of conveyor belts available. A product line consisting of hundreds of different conveyor belts with a wide variety of tension members and cover materials as well as structural surface- and running-side patterns will optimize your system's performance.
|
|
Combination belts allow the engineer to design a belt for a specific task. Features such as perforations, attachments, and coatings can be added to a plain belt to create the characteristics required for any particular application. Attachments or pockets can be utilized to locate components, while a vacuum drawn through the perforation is employed to secure the component in place on the belt. Belt Technologies, Inc. can help design edge geometries to conform to component profiles, and screws holding attachments in place can be used as a timing element.
Combination belts are commonly used in packaging equipment and automated assembly and inspection equipment which requires tooling nests or precise positioning. They can be found in timed parts nesting systems, high speed packaging, and material processing equipment.
|
|
Siegling Conducto® ventilation belts
Siegling Lin-Pack folder and carrier belts with Linatex top face
Round belts
Siegling Transtex Conveyor belts offering new possibilities
|
|
|
Belt Technologies metal belts are used in a variety of applications as friction drives, specialized conveyors, transporters, and positioning systems. Metal belts feature a variety of benefits, useful for solving unique design problems! Coatings, plating, or laminates can be combined with perforations or attachments to achieve desired conditions.
|
|
|
Because of their construction conventional conveyor belts are not suitable for many applications. Siegling ProLink modular belts are an excellent solution in these cases: The material is rot-resistant, durable and physiologically safe (all standard materials used are FDA compliant). As a rule cleaning the belts is simple.
|
|
Based on our comprehensive experience and our leadership position in traditional belting, Habasit has developed the HabasitLINK plastic modular belts range. This state-of-the-art product line completes our offering as a single source supplier and partner for your success.
More than 40 plastic modular belt types offer solutions to various industries. We consider innovation a repeating cycle, therefore further belt types are in development providing further solutions to our industry partners.
|
|
M.E.C. Transportbandes ® PVC-PU
Nowadays conveyor belts with PVC coverings can be found in all kinds of industrial concerns and have become the most important part of the conveyer belt market. They are divided into two large families: those used in the industrial field and those used in the food field.
As well as PVC belts, our range includes conveyor belts with polyurethane coverings that are suitable for both industrial use and in the food sector. What is new about them is their working life, which is unquestionably longer than that of the common PVC belt.
PVC or polyurethane section bars can be fitted to all belt types, to meet all handling needs.
|
|
Rubber Transportbandes®
M.E.C. TRANSPORTBANDES® is an extremely successful brand of high quality rubber belts, representing the fruit of continuous research.
The M.E.C. TRASPORTBANDES name means high quality, avant-garde technology and reliability, while thanks to its efficient technical service, A Zeta Gomma guarantees the solution to any applications problem. A Zeta Gomma has teams of specialised workers on hand for it customers to deal with urgent repairs, joints, disassembly and reassembly, as well as maintenance.
Thanks their polyester/nylon fibre structure, M.E.C. TRANSPORTBANDES® belts guarantee maximum flexibility, almost no stretching, however far apart the rolls, and are ideal for work in damp areas. The elastic and abrasion-resistant rubber covering allows the handling of different kinds of materials.
|
|
|
Stainless Steel is often specified when sanitation requirements are a primary concern. The hard, flat and smooth surface of the belt is easy to clean with steam or chlorinated water. Corrosive cleaning solutions will not harm the belt material. In food applications, the belts provide a stable material that will not absorb natural odors or effect the tastes of materials being transported.
|
|
A wide range of raw materials and production methods are available to satisfy ever increasing demands, such as higher speeds, increased flexibility and durability, more stringent international standards of hygiene and safety, and many more.
The product groups of plied Synthetic belting and plied Elastomer belting may be regarded as one of the most firmly established within the entire belting industry. Ammeraal Beltech continues to prove its commitment to innovation through the ongoing introduction of new materials, accessories and profiles for all industries and for various applications.
Process and conveyor belts are developed and produced in various locations throughout the world by the most modern techniques, based on expert knowledge of the application environment.
|
|
The alfabelt conveyor belts are tightened on frame. An excellent transverse rigidity is necessary to obtain :
- Concave and convex bends ;
- A support of the return strand on the lateral areas with no bending of the belt.
In the Longitudinal way, the flexibility of standard belts is preserved. In other words, tight belts on frame don't require larger drum diameter than the standard EP belt.
|
|
The TRANSPLY range offers an elastic assembly which absorbs shocks and excess tensions by means of its built-in shock absorbing pad. The TRANSPLY structure consists of two plies (polyester warp / polyamide weft) with an rubber backing.
For conveying of products <80°C.
Main qualities of TRANSPLY belts
- Rot-proof carcass
- D grade cover (superior quality anti-abrasive): resists acids when cold and corrosive salts. Abrasion loss as per NFT 46012, ISO 4649, DIN 53516, average value 100 mm3.
- Accepts low pulley diameters and reduced tension travels.
|
|
DRAGO SERIES
Green coloured PVC belts with a chemical composition similar to BREDA belts, differing in their flexible weft, double cover, and greater loading capacity. All of them are antistatic, resistant to abrasion, cutting and to mineral oils and greases. Specially suited for the throughed conveyance of non alimentary bulk products, bucket elevators and any general heavy duty industrial applications in harsh working conditions.
|
|
Sandvik 1100C is a carbon steel with a hard, smooth surface and a
black oxide layer, which makes it suitable for any application with
a low risk for corrosion. Very good thermal properties make it
ideal for baking and for heating and drying of liquids, pastes and
fine-grained products
|
|
TRANSPROFIL belts have 15 mm or 25 mm high chevrons moulded and directly integrated in the cover of the conveyor belt. These profiles are produced in a very high quality (grade D) anti-abrasive cover.
The TRANSPROFIL is a chevron belt specially designed to meet the specific requirements of an increase in the angle of inclination of the conveyor. It will be used in cases in which a conventional conveyor belt is incapable of retaining the materials conveyed.
AREAS OF APPLICATION
- Mines
- Cement works
- Cattle feed
- Cereal silos
- Port installations
- Chemical fertilizers
- Sugar factories
- Quarries and sand pits
|
|
|
This is a seamless woven endless belt. Stringent quality control procedures ensure that this high-tech belt meets the tightest tolerance necessary for dimensional consistency and stability. Nitta’s SE belts are products brought about through extensive research and development; keeping in mind the needs of the industry and the ever evolving standards. Their broad temperature range ensures top performance in almost any environment. These belts are most commonly seen as feeder belts in many different industries, from postal to box folding to ATM’s.
|
|
HONGS BELT manufacture industrial conveyer belts of PVC, PU, Silica, Rubber, with 80 kinds of sizes, using in many different production condition to meet your needs!
Application
HONGS BELT are suitable for tobacco, food, electron, medicine, drink, wood, paper, marble, ceramic machine of transportations and systems.
|
|
-Conveyor with polyurethane belt
-Conveyor with stainless steel wire mesh
-Conveyor with modular thermoplastic belt
-Magnetic conveyor
-Conveyor with rolling shutter
-Conveyor with vibration
-Special conveyors
|
|
The alfabelt conveyor belts are tightened on frame. An excellent transverse rigidity is necessary to obtain :
- Concave and convex bends ;
- A support of the return strand on the lateral areas with no bending of the belt.
In the Longitudinal way, the flexibility of standard belts is preserved. In other words, tight belts on frame don't require larger drum diameter than the standard EP belt.
|
|
Assembled with Heavy duty steel structures.
Available in Inclined model, suitable for truck loading.
Available in mobile model, can be shifted anywhere
Pre-assembled with Idlers, Rollers etc.
Heavy duty spherical roller bearings
Sub-drive through worm reduction gear box
Capacity : 3 - 40 ton per hour
|
|
|
Nitta has several series of belts specifically made for conveying. Manufactured in both Japan and Europe, Nitta is sure to have a belt specifically manufactured for your applications. Most of these belts are manufactured to 2 meters width and are stocked in NCA’s headquarters in Georgia. Several are available in 3 meter widths and stocked in Georgia. With the variety of carcasses and more than 200 types available in different colors and profiles, Nitta is in a position to match almost any customer’s requirement from the largest OEM to the smallest end-users.
|
|
Our unique range of Polyurethane-coated belts is distributed throughout the world. We also offer a wide choice of PVC belts.
Our high degree of flexibility gives us the possibility to manufacture specifically designed belts ranging from 200 m² within a few weeks.
|
|
Heat-sealed Overlap Splice
Heat-sealed Butt Splice
Alligator Splice
Fabric Pin Splice
|
|
ASTER SERIES
PVC belts with embossed top cover specially suited for inclined and declined conveyance. Most of them have 2 plies, rigid weft and are antistatic. There also are food belts, resistant to abrasion or flame retardant. Recommended applications: conveyance in airport facilities and packaging, irregular shaped bundles, organic and bulk products, etc.
|
|
Depending on the conditions of use (surface or bottom) and the level of safety demanded, the various international (or national) standards define the tests which the belts must undergo to meet the criteria defined by these standards.
In addition, certain countries demand specific approvals for underground uses, mainly in coal mines.
Range
All our EP (polyester warp, polyamide weft) and PP (polyamide warp, polyamide weft) textile carcass belts or metal belts (METALCORD, STEELCORD, METALTRANS) are available in fireproof quality. They are manufactured on demand:
- in specific cover thickness of 3+1.5 to 15+10
- in widths of 400 to 2800 mm
- in the following breaking strengths:
- TRANSFLAM textile, EP or PP fabric
2 plies: 250 N/mm to 1250 N/mm
3 plies: 400 N/mm to 1400 N/mm
4 plies: 500 N/mm to 2500 N/mm
5 plies: 630 N/mm to 3500 N/mm
- TRANSFLAM metal
with M cords: 500 N/mm to 2000 N/mm
with E cords: 800 N/mm to 2250 N/mm
with DIN construction cords: 630 N/mm to 5400 N/mm
|
|
|
|
