loading in progress... Please wait

Bar :

611 industrial products

21 products in		Metals, Semi-finished products
12 products in		Drill bits, Reamers
2 products in		Synthetic materials, Semi-finished products
1 products in		Chucks, Tailstocks
1 products in		Other couplings

+ Other...

8 products in

Conveyor Belts, Modular Belts, Conveyor Chains...

Stainless steel process conveyor belt DYMCO

Stainless steel belts are appropriate for continuous conveyance in clean rooms as they generate minimal contamination in belt conveyance systems. In addition, their limited amount of vibration causes no effect on work, and their high conductivity enables electric resistance to be restrained at no more than 10 Ohm. Preventing electrostatic charge and limiting contamination to a minimum, these belts are capable of maintaining consistently clean conveyance conditions

Applications:
- Conveyance lines for disk drive units and other parts of products such as substrates
- HDD assembly conveyance lines
- Manufacturing and inspection lines of electronic parts

Carbon steel conveyor belt Belt Technologies Europe

Carbon steel is the primary choice when a scraping blade will be in contact with the belt. The material hardness, thermal properties and magnetic characteristics of Carbon Steel provide unique features that are beneficial in a wide variety of material processing applications.

Belt Technologies Carbon Steel Process Belts are uniquely suited to the baking and chocolate industries. These belts feature remarkable wear resistance, and allow for easy system cleaning and sanitizing.

Stainless steel process conveyor belt Belt Technologies Europe

Stainless Steel is often specified when sanitation requirements are a primary concern. The hard, flat and smooth surface of the belt is easy to clean with steam or chlorinated water. Corrosive cleaning solutions will not harm the belt material. In food applications, the belts provide a stable material that will not absorb natural odors or effect the tastes of materials being transported.

Carbon steel conveyor belt Sandvik Process Systems

Sandvik 1100C is a carbon steel with a hard, smooth surface and a
black oxide layer, which makes it suitable for any application with
a low risk for corrosion. Very good thermal properties make it
ideal for baking and for heating and drying of liquids, pastes and
fine-grained products

Perforated steel conveyor belt Sandvik Process Systems

In industries where washing and drying are key processes, such as in the food industry, steel belts are critical. For example, steel belts are ideal for drying foods to comply with hygienic standards. Steel belts
can be perforated, which, in combination with the
heat stability, allows for excellent drying processes.

Stainless steel process conveyor belt Sandvik Process Systems

Sandvik 1150SM should not be exposed for prolonged periods
(a few hours) to temperatures exceeding 250°C (480°F) as a change
(increase) in strength due to precipitation hardening takes place at
high temperatures.

Linked steel belt for chip conveyor AL Industrie

CARPET OF CONVEYERS HAS CHIPS

Robust and of great quality, our carpets of conveyers are proposed to you with all the following steps:

- 25.4 mm
- 38.1 mm
- 63 mm
- 100 mm

The links of the smooth or perforated carpets are equipped with bars of transport of all dimensions defined according to your need.

Delivery period between 1 to 3 weeks

All our teams remain at your disposal.

Linked steel belt for chip conveyor SERMETO EQUIPEMENT INDUSTRIEL

The steel belt is made of perfectly interchangeable components with side wings and drag bars
High strength conveyor chains equipped with rollers and sockets,
Easily accessible adjustment system
Drive system with hollow shaft gear motor having built-in mechanical and electrical safety
Final standard painting RAL 6011

... see all the products in the category

Conveyor Belts, Modular Belts, Conveyor Chains...

15 products in

Hydraulic cylinders

Tie rod hydraulic cylinder Cross Manufacturing

Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.

Tie rod hydraulic cylinder Bosch Rexroth Industrial Hydraulics
CDT3, CGT3, CST3 serie 1X

Features:
Dimension of obstruction according to ISO 6020/2, DIN 24554 and NF/ISO 6020/2
Diameters of boring: 25 to 200 mm
Diameters stem: 12 to 140 mm, except CDT3: 28 to 140 mm
Pressure rating: 160 bars
Race until: 2700 mm for CDT3 and CGT3, 1400 mm for CST3 according to fixing and diameters stem/piston, pressure operating and principle of use
13 types of fixing

Range CGT3 is based on range CDT3 equipped with a double stem. Range CST3 is based on range CDT3 but has a position encoder without contact. The position encoder is planned for exit analogical (0 -10 Volts or 4.-20 my) or digital display IF. Possibility of flasquer a base plate gauges 6 or 10 directly on the jack.

Advantages customers:
Proximity: made in France
Guide screwed, facilitating the interventions of maintenance
Damping autorégulé or adjustable with the choice
Purge patented safety, facilitating and making safe the purging
Facility of assembly thanks to the positions freely sélectionnables of the openings on head and bottom
The throats of housing of the joints on the piston answer the ISO 7425-2 and are identical for the types of joint M, T and V, i.e. an exchange of joints is easily realizable without changing the piston.

Tie rod hydraulic cylinder Universal Hydraulik

Hydraulic cylinder (UHD, UHSZ 100/ 160, UHSZ 250)
in accordance with the currently valid ISO and DIN regulations.
In addition, standard cylinders up to 250 bar. In line with customer requirements we also develop special cylinders according to quite individual specifications.

All cylinder versions can be produced as serve cylinders or fitted with an integrated position measuring system.

Tie rod hydraulic cylinder Rotomation Inc

Switch mounts by strap to cylinder, place as required for access and signal phasing: R (Sink) or S (Source) switches only

Tie rod hydraulic cylinder VEGA

Cylinders with tie-rods, providing an alternative to the V160C series in case of use with high pressures and temperatures. They are extremely reliable and sturdy.They can be fitted with adjustable magnetic end stroke switches. Ideal with die-cast molds.

Tie rod hydraulic cylinder Bosch Rexroth Industrial Hydraulics

- Mounting of head and cap according to the tie rod principle
- Service-friendly modular system
- Small installation dimensions
- Various mounting types
- Interchangeability thanks to standardization
- Industry-specific and project-related cylinders on inquiry

Block cylinder Römheld
160 - 500 bar

Hydraulic cylinders with block-type body
single acting with / without spring return
double acting
piston diameter 16 up to 200 mm
max. operating pressure 160/250/500 bar
strokes from 8 to 200 mm

Hydraulic clamping cylinder Römheld
100 - 500 bar / 2.2 - 50 kN

Hydraulic clamps and clamping cylinders
single or double acting
max. clamping forces from 2.2 to 50 kN
max. operating pressure from 100 to 500 bar
max. clamping strokes from 3 to 16 mm

Hydraulic cylinder Holmatro Industrial Equipment
5 - 500 t, 720 bar

Features & benefits

- can be used in all positions
- protected against ejection of the plunger
- pressure relief valve on outlet port
- flat saddle prevents damage of the plunger. Easy to replace.
- flat saddle easy to replace by tilting saddle for off-center loading

Hydraulic push unit Römheld
250 - 500 bar / 25 - 100 mm

Hydraulic cylinder with integrated guide rods and front block
to compensate high side loads and moments

piston diameter 25 up to 100 mm
max. operating pressure 250 / 500 bar
strokes from 8 to 200 mm

Hydraulic standardized cylinder Römheld
200 - 500 bar / 60 - 1200 mm

Hydraulic cylinder, design with tube
double acting
piston diameter 25 up to 80 mm
max. operating pressure 200 / 250 bar
strokes from 60 to 1,200 mm

Screw-in cylinder Römheld
max. 500 bar / 6 - 102 kN

Hydraulic workpieces to provide a self-adjusting rest for workpieces
and to compensate deflection and vibration under machining loads
single and double acting
admissible load from 6 to 102 kN
max. operating pressure 500 bar
plunger strokes from 6 to 20 mm

Hydraulic cylinder GKS PERFEKT
700 bar

for heavy loads up to 565 tons!

All-purpose and can be combined with different hydr. pumps.

All cylinders comply to the demanding ASME B30.1 standard and are proof tested to 125% of capacity before leaving the factory.

On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance!

Hydraulic tool GKS PERFEKT
700 bar

for heavy loads up to 565 tons!

We are offering high pressure hydraulic tools and equipment like cylinders, pumps, shop equipment, bearing maintenance etc.

On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance!

... products without technical information

Hydraulic cylinder Werner Weitner GmbH
700 bar - 5t -> 1100t

... see all the products in the category

Hydraulic cylinders

see the results for the following category : Pneumatic cylinders

		- Other...
1 products in		Other materials, Semi-finished products
36 products in		Machine feed
23 products in		Electrostatic generators, Antistatic bars, Air ionisation...
10 products in		Special handling and lifting tools
6 products in		Indicators, Displays
4 products in		"Open" storage: Shelving
4 products in		Ball transfer units, Ball transfer table, Ball bars
4 products in		Solid state lasers: Laser diodes, VCSEL , semiconductor lasers
4 products in		LEDs, Photodiodes, Laser diodes
8 products in		Lighting, Flashlights
1 products in		Other accessories for construction equipment
1 products in		Profiles for modular structures
1 products in		Ultrasonic cleaning: Machines, Tanks, Tunnels ...
42 products in		Swivels, Rollers
11 products in		Industrial doors
10 products in		Chart recorders, Paperless recorders, Videographic recorders
8 products in		Dynamic sealing
7 products in		Cleaning brushes, Washing brushes
4 products in		Antistatic brushes
4 products in		Heating resistors
2 products in		Magnets
2 products in		Abrasive brushes: Deburring brushes, Stripping brushes...
1 products in		Radio, Microwave, Infra-red, Optical connections
1 products in		Labeling machines, Labelers
12 products in		Sleeve wrapping machines
11 products in		Machines for electronics production
7 products in		Soldering machines, Brazing machines
6 products in		Pressure gauges, Pressure indicators
4 products in		Continuous furnaces
4 products in		Induction heating equipment
3 products in		Automated storage
3 products in		Multi-tasking machine tools
3 products in		Transfer machines
2 products in		Horizontal lathes, Horizontal turning centers
2 products in		Tool-holders, Tool changers
1 products in		Tools for Pipes, Tubes, Cables
1 products in		Horizontal milling machines, Horizontal machining centers 5-axes and more
1 products in		Bins, Crates, Small containers
1 products in		Milling machines, Machining centers: Universal & Multi spindle
8 products in		Conveyor Belts, Modular Belts, Conveyor Chains...
15 products in		Hydraulic cylinders
12 products in		Pneumatic cylinders
11 products in		Level switches: vibrating level switches, rotary paddle switches, membrane level switches
8 products in		Locking elements, Clamping elements, Centering elements
6 products in		Lubrication: Equipment and accessories
6 products in		Mechanical presses
5 products in		Reels, Decoilers
3 products in		Press accessories: Tools, Handling...
3 products in		Static sealing
2 products in		Welding accessories and equipment
2 products in		Hose clamps
2 products in		Protection bellows
2 products in		Surface treatment machines, Surface treatment equipment
2 products in		Metrology equipment
2 products in		Universal joints, Shafting
2 products in		EMI shielding
2 products in		Electric power-supply connectors: plugs, sockets...
2 products in		Batch furnace
2 products in		Inserts
2 products in		Terminal blocks
1 products in		Fiber optics cables and connectors
1 products in		Non contact level sensors: radar, ultrasonic, laser level sensors...
1 products in		Solvent cleaning machines: immersion, spray, vapor ...
1 products in		Linear brakes and rod locks
1 products in		Surge Protection Devices : Lightning conductors
1 products in		Bonded abrasives, Grinding wheels
1 products in		Other safety and signaling equipment
1 products in		Hinges, Latches
1 products in		Production machines for the textiles industry
1 products in		Optical lenses
1 products in		Finishing machines, Lapping machines, Polishing machines
1 products in		Proximity sensors
1 products in		Woodworking machines
1 products in		Belt grinding machines
1 products in		Other dampers
1 products in		Arc welding machines (MIG, TIG,...)
2 products in		Other ground conveyors
1 products in		Articulated robots
1 products in		Stretch wrapping machines, Hooding machines
1 products in		Palletizers, Palletizing robots
1 products in		Assembling machines, Screwing machines
20 products in		Gear pumps, Rotary lobe pumps
16 products in		Piston pumps, Plunger pumps
15 products in		Pressure sensors, Pressure switches
13 products in		Other compressors
12 products in		Screw compressors
10 products in		Hydraulic electrovalves, Hydraulic valves
10 products in		Autoclaves, Sterilizers, Pasteurizers
8 products in		Vacuum pumps
8 products in		Hydraulic pumps
8 products in		Reciprocating compressors
7 products in		Hydraulic couplings
7 products in		Diaphragm pumps
7 products in		Pneumatic conveying: Pumps, Valves, Piping...
6 products in		Peristaltic pumps
5 products in		Technical gas production equipment
5 products in		Other valves
5 products in		Screw pumps
4 products in		Hydraulic power units
4 products in		Magnetic drive pumps
4 products in		Pressure regulators, Flow regulators
4 products in		Ball valves, Plug valves
3 products in		Centrifugal pumps
3 products in		Dispensing pumps
3 products in		Rotary vane pumps, Impeller pumps
3 products in		Hydraulic motors
3 products in		Valves, Clappers, Bursting discs
3 products in		Other flow-meters
3 products in		Hydraulic filters, Oil treatment
3 products in		Waterjet cutting machines
2 products in		Couplings, Sleeves
2 products in		Hydraulic hoses, Accessories
2 products in		Dispensing: Equipment, Accessories
2 products in		Conveyor Belt Fasteners and Splicing Equipment
2 products in		Welding robots
2 products in		Needle valves, Piston valves
2 products in		Liquid / solid separators: decanters, centrifuges, filter presses...
2 products in		Pneumatic filters, Compressed air treatment
2 products in		Solenoid valves for all fluids
2 products in		High pressure cleaners
2 products in		Anti-vibration mounts
2 products in		Blowers
1 products in		Knife valves, Gate valves
1 products in		Temperature transmitters
1 products in		Butterfly valves
1 products in		Turbine flow-meters
1 products in		Other manufacturing equipment
1 products in		Hydraulic control boxes
1 products in		Hoists
1 products in		Humidity sensors, Transmitters
1 products in		Robotic cells
1 products in		Variable area flow-meters
1 products in		Tapping machines
1 products in		Pneumatic electrovalves, Pneumatic valves
1 products in		Pneumatic couplings
1 products in		Ventilation, suction equipment: extraction arms, air ducts, grills...
1 products in		Pressure calibrators
1 products in		Coriolis mass flow-meters
1 products in		Jacks, Hydraulic jacks
1 products in		Hydraulic presses
1 products in		Level indicators