|
|
The TRANSPLY range offers an elastic assembly which absorbs shocks and excess tensions by means of its built-in shock absorbing pad. The TRANSPLY structure consists of two plies (polyester warp / polyamide weft) with an rubber backing.
For conveying of products <80°C.
Main qualities of TRANSPLY belts
- Rot-proof carcass
- D grade cover (superior quality anti-abrasive): resists acids when cold and corrosive salts. Abrasion loss as per NFT 46012, ISO 4649, DIN 53516, average value 100 mm3.
- Accepts low pulley diameters and reduced tension travels.
|
|
DRAGO SERIES
Green coloured PVC belts with a chemical composition similar to BREDA belts, differing in their flexible weft, double cover, and greater loading capacity. All of them are antistatic, resistant to abrasion, cutting and to mineral oils and greases. Specially suited for the throughed conveyance of non alimentary bulk products, bucket elevators and any general heavy duty industrial applications in harsh working conditions.
|
|
Sandvik 1100C is a carbon steel with a hard, smooth surface and a
black oxide layer, which makes it suitable for any application with
a low risk for corrosion. Very good thermal properties make it
ideal for baking and for heating and drying of liquids, pastes and
fine-grained products
|
|
TRANSPROFIL belts have 15 mm or 25 mm high chevrons moulded and directly integrated in the cover of the conveyor belt. These profiles are produced in a very high quality (grade D) anti-abrasive cover.
The TRANSPROFIL is a chevron belt specially designed to meet the specific requirements of an increase in the angle of inclination of the conveyor. It will be used in cases in which a conventional conveyor belt is incapable of retaining the materials conveyed.
AREAS OF APPLICATION
- Mines
- Cement works
- Cattle feed
- Cereal silos
- Port installations
- Chemical fertilizers
- Sugar factories
- Quarries and sand pits
|
|
|
This is a seamless woven endless belt. Stringent quality control procedures ensure that this high-tech belt meets the tightest tolerance necessary for dimensional consistency and stability. Nitta’s SE belts are products brought about through extensive research and development; keeping in mind the needs of the industry and the ever evolving standards. Their broad temperature range ensures top performance in almost any environment. These belts are most commonly seen as feeder belts in many different industries, from postal to box folding to ATM’s.
|
|
HONGS BELT manufacture industrial conveyer belts of PVC, PU, Silica, Rubber, with 80 kinds of sizes, using in many different production condition to meet your needs!
Application
HONGS BELT are suitable for tobacco, food, electron, medicine, drink, wood, paper, marble, ceramic machine of transportations and systems.
|
|
-Conveyor with polyurethane belt
-Conveyor with stainless steel wire mesh
-Conveyor with modular thermoplastic belt
-Magnetic conveyor
-Conveyor with rolling shutter
-Conveyor with vibration
-Special conveyors
|
|
The alfabelt conveyor belts are tightened on frame. An excellent transverse rigidity is necessary to obtain :
- Concave and convex bends ;
- A support of the return strand on the lateral areas with no bending of the belt.
In the Longitudinal way, the flexibility of standard belts is preserved. In other words, tight belts on frame don't require larger drum diameter than the standard EP belt.
|
|
Assembled with Heavy duty steel structures.
Available in Inclined model, suitable for truck loading.
Available in mobile model, can be shifted anywhere
Pre-assembled with Idlers, Rollers etc.
Heavy duty spherical roller bearings
Sub-drive through worm reduction gear box
Capacity : 3 - 40 ton per hour
|
|
|
Nitta has several series of belts specifically made for conveying. Manufactured in both Japan and Europe, Nitta is sure to have a belt specifically manufactured for your applications. Most of these belts are manufactured to 2 meters width and are stocked in NCA’s headquarters in Georgia. Several are available in 3 meter widths and stocked in Georgia. With the variety of carcasses and more than 200 types available in different colors and profiles, Nitta is in a position to match almost any customer’s requirement from the largest OEM to the smallest end-users.
|
|
Our unique range of Polyurethane-coated belts is distributed throughout the world. We also offer a wide choice of PVC belts.
Our high degree of flexibility gives us the possibility to manufacture specifically designed belts ranging from 200 m² within a few weeks.
|
|
Heat-sealed Overlap Splice
Heat-sealed Butt Splice
Alligator Splice
Fabric Pin Splice
|
|
ASTER SERIES
PVC belts with embossed top cover specially suited for inclined and declined conveyance. Most of them have 2 plies, rigid weft and are antistatic. There also are food belts, resistant to abrasion or flame retardant. Recommended applications: conveyance in airport facilities and packaging, irregular shaped bundles, organic and bulk products, etc.
|
|
Depending on the conditions of use (surface or bottom) and the level of safety demanded, the various international (or national) standards define the tests which the belts must undergo to meet the criteria defined by these standards.
In addition, certain countries demand specific approvals for underground uses, mainly in coal mines.
Range
All our EP (polyester warp, polyamide weft) and PP (polyamide warp, polyamide weft) textile carcass belts or metal belts (METALCORD, STEELCORD, METALTRANS) are available in fireproof quality. They are manufactured on demand:
- in specific cover thickness of 3+1.5 to 15+10
- in widths of 400 to 2800 mm
- in the following breaking strengths:
- TRANSFLAM textile, EP or PP fabric
2 plies: 250 N/mm to 1250 N/mm
3 plies: 400 N/mm to 1400 N/mm
4 plies: 500 N/mm to 2500 N/mm
5 plies: 630 N/mm to 3500 N/mm
- TRANSFLAM metal
with M cords: 500 N/mm to 2000 N/mm
with E cords: 800 N/mm to 2250 N/mm
with DIN construction cords: 630 N/mm to 5400 N/mm
|
|
CSA 450S1 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
MSHA 330S3 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
MSHA 350S1 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
MSHA 450S1 NNb
Application: This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
PVIM 450S1 NNb
This versatile, heavy-duty interwoven-constructed belt offers excellent service in underground coal mines.
|
|
ESPOT SERIES
White coloured PVC belts with a chemical composition similar to CLINA belts, differing in their flexible weft, double cover, and greater loading capacity. All of them are antistatic, resistant to abrasion and to animal and vegetal oils and greases. Specially suited for the throughed conveyance of foodstuffs, and for bucket elevator applications.
|
|
|
|
|
|
Goodyear EP's premium all-purpose fabric conveyor belt construction can be used in a variety of industries and applications with most of Goodyear EP’s exclusive rubber cover compounds. This product has proven itself successful since its inception in 1995.
Excellent rip, tear and impact resistance
Specially designed crimped warp cords straighten on impact and then recover their original shape. This enables the fabric to absorb greater impact loads and resist tearing for long-lasting durability and lowest cost-per-ton conveyed.
High ultimate strength
Plylon Plus withstands severe tension spikes at start-up, retains mechanical fasteners and withstands continuous flexing around pulleys. This higher ultimate strength makes a critical difference in abusive operating conditions.
Reduced stretch
The combination of fabric design and dip process provides less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduces the number of splices at break-in. Contact your local Goodyear representative to calculate permanent and elastic elongation requirements for your specific systems.
Applications:
Primary Crushers
Secondary Crushers
Pit Belts
Stacker Conveyors
Mainlines
Coal Prep Plant
Ship Unloaders
Log Decks
Log Debarkers
Trash and Recycling
|
|
|
|
|
|
PVG 120S1 ZBb-1
Goodyear EP's exclusive Z-Belt continuous profile belt will quietly pass the competition. Z-Belt allows for increased product carrying capacity and greatly reduces the vibration and noise level on return idlers. An additional feature allows better drainage when transporting wet materials. This belt is ideal for conveying fertilizers, grains, oily products, agricultural produce and animal feeds.
PVG 150H2 ZBb-1
Goodyear EP's exclusive Z-Belt continuous profile belt will quietly pass the competition. Z-Belt allows for increased product carrying capacity and greatly reduces the vibration and noise level on return idlers. An additional feature allows better drainage when transporting wet materials. This belt is ideal for conveying fertilizers, grains, oily products, agricultural produce and animal feeds.
PVG 150H2 ZFb-1
Goodyear EP's exclusive Z-Belt continuous profile belt will quietly pass the competition. Z-Belt allows for increased product carrying capacity and greatly reduces the vibration and noise level on return idlers. An additional feature allows better drainage when transporting wet materials. This belt is ideal for conveying fertilizers, grains, oily products, agricultural produce and animal feeds.
PVG 220S2 BBb
This plied belt has been specially designed for recycling, agricultural and industrial applications for conveying of oily products, grains, feeds, fertilizers, agriculture and produce. The moderately oil resistant PVG compound provides low temperature capabilities and resistance to slider abrasion. Unique HPC technology delivers superior tracking performance and thermo-flo splicing possibilities.
PVS 150H2 RBb
Unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. State-of-the-art HPC technology delivers superior tracking performance, resistance to edge wear and flexibility over small pulleys. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.
|
|
Ramsey silent conveyor chain offers many features that appeal to designers and operators of industrial conveying systems. It is quiet, strong, smooth, and efficient, and is available in a wide range of widths and styles.
Ramsey Silent Chain is also used extensively for the transport and handling of glassware. Suitable for hot-end handling, cold-end handling, cross conveying, as well as precision inspection and measuring applications, Ramsey chain is designed and built to satisfy the demanding requirements of today's glass industry.
|
|
Bushed conveyor chains consist of two components: one is the plate or the stud for the transmission of the tensile forces and the other is responsible for the rotation of the chain. Nowadays, large numbers of chains exist for different types of application, such as in the cement or agricultural industry.
Amongst the large number of standarized (DIN) and non-standardized bushed conveyor chains we offer following types of chain:
- Bushed conveyor chains
- Bushed conveyor chains with rollers
- Cranked bushed conveyor chains
- Riverted bushed conveyor chains
- Block lashing chains
|
|
Together with our construction department we develop high precision chain systems for our standard conveyor chain programme as well as for individual customer requests.
- Conveyor Chains with straight attachment plates
- Conveyor Chains with bent attachment plates
- Conveyor Chains with extended pins
- Conveyor Chains width multiple strand connecting links
- Conveyor Chains with U-shaped attachments
- Conveyor chains with special straight side plates
- Conveyor chains with special bent side plates
- Conveyor chains with special U-shaped attachments
- Conveyor chains with standard attachments
|
|
Ramsey has developed two unique, wear resistant conveying chains that extend conveyor life and reduce maintenance in glass conveying applications. The products, named ALLGUARD AG and ALLGUARD FX, are both designed to protect chain pins from lateral wear during chain operation. ALLGUARD AG and ALLGUARD FX chains are available to replace nearly any existing side guide, center guide, or multi-guide chain. Typically chains are available that directly interchange with competitor's products and utilize existing sprockets, so sprocket modification is seldom required.
Contact Ramsey for more detailed information, or for assistance.
|
|
|
We are keeping various kinds of products by the units of carasses, the features of every cover rubber, shaping and those also help to maximize efficiency in material transportation/handling in diverse industrial sites dealing with cement, steel, power supplies or quarries.
|
|
|
Nitta supplies a comprehensive range of feeder belts, carrier belts and compression belts for the box making industry. Our PolyBelt series XH style belts have a special synthetic rubber applied to both the top and bottom covers. These covers allow for high coefficient of friction against paper. With increased rigidity and precise thickness, Nitta’s belts accurately fold boxes, transport them with uniform speed and minimize failure in positioning and folding. The feeder belts are seamless and have a special rubber that provides high coefficient of friction and high abrasion resistance on the transporting surface.
|
|
|
|
|
|
HONGS BELT profiles and special profiles for conveyer belt In these cases, profiles of different heights and shapes depending on the type of product can be welded on the belt to prevent material from falling back and in maintaining conveying capacity even at very high angles of inclination.
HONGS BELT has designed and developed a range of profiles which meets normal inclined conveying requirements with a wide range of possible applications.
The choice of profiles, as well as the right spacing and positioning, is determined by a thorough analysis of the conveying problem.
Although it may be possible in some cases to calculate the theoretical conveyor capacity, we advise you to contact our Technical Department to obtain full assistance.
Our profiles and belt covers are made of the same high quality material, and are available in PVC, PU and Polyolefin.
Triangle, square, rectangular and tracking profiles can be fitted longitudinally on both belt surfaces. Notched tracking profiles allow for smaller drum diameters. Each profile has been designed to satisfy the possible working conditions. New profiles have been developed, in particular for running on small drum diameters in the food industry.
|
|
Our company group manufacture special belts and spliceless endless belts :
- Flat belts for high power transmission (i.e. for Havesters)
- Haull-off belts for the cable, pipes and profiles indutry
- Spiral paper tube winding belts
- Process belts for the food indutry
- Coil wrapping belt for the steel roll industry
- Thrower belts for ship loading and slinger belts
All these belts are manufactured on request :
- Carcasse with coated fabric, steel cord or synthetic cord (Rayon, Polyester or Aramid)
- Special rubber as cover material (high wear resistant, heat resistant, oil resistant, white with FDA approval etc.)
- Length, width and thickness as wished
- Full rubber edges or cutted edges
- Endless winded or with a hot vulcanized splice
- Hot vulcanized in a high pressure press or in an autoclav
- smooth, patterned or surface grinded for perfect planity
- Chevrons, wedge profil
- etc.
|
|
EUROBELT® SERIES E93, with a pitch of 30 mm, and due to its highly advanced design, enables all kind of turns whose minimum radius is 2.2 times the belt width. It can also be used in spiral transport applications.
The total length of the belt will be calculated always starting from the outer radius of its bent sections.
|
|
The alfabelt conveyor belts are tightened on frame. An excellent transverse rigidity is necessary to obtain :
- Concave and convex bends ;
- A support of the return strand on the lateral areas with no bending of the belt.
In the Longitudinal way, the flexibility of standard belts is preserved. In other words, tight belts on frame don't require larger drum diameter than the standard EP belt.
|
|
|
Our PU food conveyor belts range includes our special "HR" belts. They feature a polyurethane bottom cover embossed with an exclusive "rice grain" pattern for easy and fast cleaning in accordance with HACCP regulations on sensitive food applications. When combined with FPS (Food Processing Safeguard) sealed edges, HR belts provide the most effective, lasting barrier against the proliferation of bacteria.
|
|
CLINA SERIES
Belts with PVC, PU or polyester fabric top cover, non toxic and resistant to animal and vegetal oils and greases. A wide range of belts to be applied mainly in the food conveyance industries, though also recommendable for other applications. Most of them are white coloured and have rigid weft, although they are also available in blue and natural colours, and some have flexible weft.
|
|
|
|
