|
|
Mink MBS-System (MBS) - The next best thing to floating
The Mink MBS-System is superior to conventional conveyor belts, which explains why this concept is preferred by customers in so many different industries. This modular brush conveyor belt can handle products of every conceivable kind, while preventing damage and avoiding contamination and noise. The bristle surface can be adjusted to the required degree of gentleness. If repairs become necessary, individual modules can be replaced quickly and easily. The belts are highly resistant to acids, alkalis and heat.
Advantages:
• Gentler than conventional conveyer belts
• The ideal way to convey products that are susceptible to dents and scratches on inclines
• Quick and easy assembly
• Superior technology at an attractive price
• Low noise
• Dirt falls between the bristles, no damage to surfaces
|
|
|
Metso Minerals delivers the world's most comprehensive range of conveyor belts. Based on more than 100 years of experience in development, manufacture and applications know-how, Trellex belts and belt systems are designed to meet specific end-user requirements for high performance and cost-efficiency.
|
|
POWER CURVE® Chain:
This chain is manufactured using a pin which is both smaller in diameter and slightly longer than its Standard Series version. This design allows for extra clearance between both the pin and the bushing and in overall chain width as well
Plastic Film Feeder Chain:
These special chains are designed for thermoforming applications and unusual conveying applications such as creating polystyrene plates, shrink wrap, blister packs and many other plastic items. The chain features precise, pointed link plates combined with extended pins or straight attachments (for additional rigidity in operation) which make them ideal for conveying plastic film into thermoforming operations. Three models are available for your conveying needs
|
|
Stainless steel belts are appropriate for continuous conveyance in clean rooms as they generate minimal contamination in belt conveyance systems. In addition, their limited amount of vibration causes no effect on work, and their high conductivity enables electric resistance to be restrained at no more than 10 Ohm. Preventing electrostatic charge and limiting contamination to a minimum, these belts are capable of maintaining consistently clean conveyance conditions
Applications:
- Conveyance lines for disk drive units and other parts of products such as substrates
- HDD assembly conveyance lines
- Manufacturing and inspection lines of electronic parts
|
|
KettenWulf develops and produces special conveyor and transport chains in all designs and dimensions. Moreover, we manufacture standardised chains to DIN and ISO norms. Our standard delivery programme includes:
» Bushed conveyor chains according to DIN 8165
» Bushed conveyor chains according to DIN 8167
» Conveyor chains with hollow pins according to the former DIN 8165
» Conveyor chains with hollow pins according to DIN 8168
» Deep links chains according to DIN 8165
» Deep links chains according to DIN 8167
» Trough conveyor chains according DIN 8165
» Trough conveyor chains according DIN 8167
» Galle chains according to DIN 8150
» Draw bench chains according to DIN 8156
» Draw bench chains according to DIN 8157
» Pinions
» Hinged gear racks
» River gate chains
» Block link chains
|
|
Carbon steel is the primary choice when a scraping blade will be in contact with the belt. The material hardness, thermal properties and magnetic characteristics of Carbon Steel provide unique features that are beneficial in a wide variety of material processing applications.
Belt Technologies Carbon Steel Process Belts are uniquely suited to the baking and chocolate industries. These belts feature remarkable wear resistance, and allow for easy system cleaning and sanitizing.
|
|
HabaCHAIN offers a first class range of plastic chains at a very competitive price/value ratio.
The wide choice of materials available is ideal to solve all mechanical or chemical resistance problems. As the global market leader, Habasit is your one-stop-shop partner for a full range of innovative, value added belting solutions.
|
|
KettenWulf is the leading manufacturer of high-quality conveyor and transport chains. Our products have a wide range of applications in various industries.
As our customers have widely varying requirements, KettenWulf generally provides individualised services in its product division conveyor chains. Our engineers and technicians develop special conveyor and transport chains that are customised to suit your needs.
KettenWulf develops and produces special conveyor and transport chains in all designs and dimensions. Moreover, we manufacture standardised chains to DIN and ISO norms. Our standard delivery programme includes:
|
|
|
Available in thousands of combinations of steel-materials and specifications, each pitch of Tsubaki Conveyor Chain has uniform quality. Application of the latest production technology and our own quality control system allow us to confidently guarantee outstanding performance.
|
|
|
|
|
|
An ideal machine uptime and equipment availability, with minimal maintenance effort, are the prime requisite for a smooth production flow in the automotive industry.
KettenWulf chain technology contributes to ensuring optimum manufacturing efficiency and safety on a sustainable basis. For decades, notable car manufacturing companies and the respective OEMs have put faith in KettenWulf drive and conveyor technology, because we very much understand the requirements of the automotive industry.
In our company we combine the individual performances and capabilities of all our departments, be it Research & Development, Production or Assembly to achieve the best product for your individual transport and conveying needs. Based on our profound know-how and expertise for this particular industry, we are able to provide innovative chain solutions which not only have economical but also ecological production advantages. Today our customers can already benefit from our low-maintenance and lube-free technology.
|
|
|
|
|
|
Bulk material handling industry
Leading original equipment manufacturers in the bulk material handling industry trust KettenWulf. We count equipment manufacturers to our customers which production sites are distributed all around the world and with whom we develop and manufacture innovative and efficient products on the highest quality levels in a partnership co-operation.
For almost all transportation processes in the bulk material handling industry KettenWulf supplies optimal chain constructions. Together with our customers we compile the correct solution, no matter, whether it concerns the transport of rough or fine grained bulk materials or of goods with corrosive or abrasive cahracteristics.
KettenWulf develops and produces special chains and sprockets for the transportation of almost all bulk materials:
- clinker, gypsum and clay during the cement production
- granulates in fertilizer production
- coal, coarse-grained ore, crushed stone, limstone and slate in the mining industry
- biomass, coal, slag and quartzite in power stations
- polymers of basic materials in the plastic production
- wood chips in the wood and paper industry
- steel chips in the automotive and metalworking industry
- recycling materials in valuable material sorting equipment.
|
|
|
|
|
|
Steel industry
For more than 80 years the KettenWulf Group has been developing and manufacturing special conveyor chains for the steel-, metallurgy and aluminum industries worldwide.
Our product range covers conveyor chains for the entire production process. KettenWulf chains and sprockets are mainly used in the the following areas:
- stockyard technology for coal and ores
- applications in powder metal facilities
- furnaces
- steelworks
- casting machines and roller mills
- transport and looping chains for quality improvements in hot and cold-rolled areas
High-performance products of premier quality, strict compliance to the most extreme specifications, innovation and a complete focus on our customers` demands form the basis of our leading reputation. Our products convince through their latest technology, quality and reliability.
Due to transport weights that can at times be very high and the extreme environmental conditions, great demands are made on our chains. To cope with the special and complex technical requirements of the various steps of the manufacturing and final processing of steel, our research and development division in coorperation with our customers is striving to provide most modern chain technologies.
The requirements related to our products such as reduction of abrasion related wear on reclaimer chains in iron ore and coal mixing beds, temperature resistance of conveyor chains in hot material transport and highest precision of roller chains in looper applications, only present a small part of the technical requirements for which we have come up with innovative and successful solutions.
|
|
Wood industry
Leading equipment manufacturers put their trust in KettenWulf.
Equipment manufacturers with worldwide plant operations belong to our clientele with whom we mutually develop and manufacture innovative and effective products at the highest possible quality level. Furthermore, equipment operators worldwide confide in our products.
The KettenWulf Group commits the know-how and production experience of more than 80 years to the development of innovative and prospective technologies. The output of this commitment is a broad spectrum of technically well-engineered products for the timber industry and the O.E.M. market.
To meet the highest requirements for the KettenWulf products, our engineers and designers develop optimum solutions for your specific conveyor application. KettenWulf presents options for nearly all conveying processes of the timber industry.
» log transport
» plank transport and sawing line
» woodchips handling
» wood processing
|
|
Siegling Transilon conveyor and processing belts for speeding the flow of goods and for economic processing in the light materials handling industry.
The standard Transilon construction consists of polyester fabric as tension member with synthetic or elastomer coatings. Transilon is used successfully in industrial, commercial and service companies worldwide. The standard product range includes over 120 various conveyor belt types and constructions for the most diverse of application requirements.
|
|
|
Habasit offers the broadest range of conveyor belts available. A product line consisting of hundreds of different conveyor belts with a wide variety of tension members and cover materials as well as structural surface- and running-side patterns will optimize your system's performance.
|
|
Combination belts allow the engineer to design a belt for a specific task. Features such as perforations, attachments, and coatings can be added to a plain belt to create the characteristics required for any particular application. Attachments or pockets can be utilized to locate components, while a vacuum drawn through the perforation is employed to secure the component in place on the belt. Belt Technologies, Inc. can help design edge geometries to conform to component profiles, and screws holding attachments in place can be used as a timing element.
Combination belts are commonly used in packaging equipment and automated assembly and inspection equipment which requires tooling nests or precise positioning. They can be found in timed parts nesting systems, high speed packaging, and material processing equipment.
|
|
Siegling Conducto® ventilation belts
Siegling Lin-Pack folder and carrier belts with Linatex top face
Round belts
Siegling Transtex Conveyor belts offering new possibilities
|
|
|
Belt Technologies metal belts are used in a variety of applications as friction drives, specialized conveyors, transporters, and positioning systems. Metal belts feature a variety of benefits, useful for solving unique design problems! Coatings, plating, or laminates can be combined with perforations or attachments to achieve desired conditions.
|
|
|
Because of their construction conventional conveyor belts are not suitable for many applications. Siegling ProLink modular belts are an excellent solution in these cases: The material is rot-resistant, durable and physiologically safe (all standard materials used are FDA compliant). As a rule cleaning the belts is simple.
|
|
Based on our comprehensive experience and our leadership position in traditional belting, Habasit has developed the HabasitLINK plastic modular belts range. This state-of-the-art product line completes our offering as a single source supplier and partner for your success.
More than 40 plastic modular belt types offer solutions to various industries. We consider innovation a repeating cycle, therefore further belt types are in development providing further solutions to our industry partners.
|
|
M.E.C. Transportbandes ® PVC-PU
Nowadays conveyor belts with PVC coverings can be found in all kinds of industrial concerns and have become the most important part of the conveyer belt market. They are divided into two large families: those used in the industrial field and those used in the food field.
As well as PVC belts, our range includes conveyor belts with polyurethane coverings that are suitable for both industrial use and in the food sector. What is new about them is their working life, which is unquestionably longer than that of the common PVC belt.
PVC or polyurethane section bars can be fitted to all belt types, to meet all handling needs.
|
|
Rubber Transportbandes®
M.E.C. TRANSPORTBANDES® is an extremely successful brand of high quality rubber belts, representing the fruit of continuous research.
The M.E.C. TRASPORTBANDES name means high quality, avant-garde technology and reliability, while thanks to its efficient technical service, A Zeta Gomma guarantees the solution to any applications problem. A Zeta Gomma has teams of specialised workers on hand for it customers to deal with urgent repairs, joints, disassembly and reassembly, as well as maintenance.
Thanks their polyester/nylon fibre structure, M.E.C. TRANSPORTBANDES® belts guarantee maximum flexibility, almost no stretching, however far apart the rolls, and are ideal for work in damp areas. The elastic and abrasion-resistant rubber covering allows the handling of different kinds of materials.
|
|
|
Stainless Steel is often specified when sanitation requirements are a primary concern. The hard, flat and smooth surface of the belt is easy to clean with steam or chlorinated water. Corrosive cleaning solutions will not harm the belt material. In food applications, the belts provide a stable material that will not absorb natural odors or effect the tastes of materials being transported.
|
|
Hangzhou Donghua Chain Group Co., Ltd is the biggest chain manufactory in China. This company is specialized in producing all kinds of standard chains and special chains, e.g. A or B series chains, automobile chains, stainless steel chains, combine harvester chains, heavy-duty cranked link transmission chains, stereo garage chains and maintenance-free chains etc.
If you are interested in our products please feel free to contact us by e-mail: zhangxb@dhchain.com
|
|
|
|
|
|
Plastic Top Chain
Top plates and chain parts are made of engineering plastic and are connected using engineering plastic or stainless steel pins. Plastic top chains are used mainly in the food processing, beverage, dairy, and packaging industries.
RS Plastic Chain
The small pitch of RS plastic chain allows smaller diameter sprockets to be used, reducing the dead space between conveyors and ensuring smooth transfer of conveyed goods from one conveyor to another. The main markets for RS plastic chain come from the food processing, packaging, automobile, container, and pharmaceutical industries.
Beltop Chain
Beltop chain uses an alternating combination of interconnected modular engineering plastic links to transport goods in large quantities on wide, belt-shaped conveyors. Beltop chains are in demand in the corrugated cardboard, automobile, and food and beverage industries to replace conventional types in a variety of conveyor applications.
Also avaliable,
Stainless Steel Top Chain
Stainless steel top chain uses highly corrosion-resistant stainless steel for key components. Stainless steel top chain offers a higher maximum allowable load than standard plastic top chain and is especially suitable for transporting steel components or glass containers via direct mounting.
|
|
The alfabelt conveyor belts are tightened on frame. An excellent transverse rigidity is necessary to obtain :
- Concave and convex bends ;
- A support of the return strand on the lateral areas with no bending of the belt.
In the Longitudinal way, the flexibility of standard belts is preserved. In other words, tight belts on frame don't require larger drum diameter than the standard EP belt.
|
|
The TRANSPLY range offers an elastic assembly which absorbs shocks and excess tensions by means of its built-in shock absorbing pad. The TRANSPLY structure consists of two plies (polyester warp / polyamide weft) with an rubber backing.
For conveying of products <80°C.
Main qualities of TRANSPLY belts
- Rot-proof carcass
- D grade cover (superior quality anti-abrasive): resists acids when cold and corrosive salts. Abrasion loss as per NFT 46012, ISO 4649, DIN 53516, average value 100 mm3.
- Accepts low pulley diameters and reduced tension travels.
|
|
DRAGO SERIES
Green coloured PVC belts with a chemical composition similar to BREDA belts, differing in their flexible weft, double cover, and greater loading capacity. All of them are antistatic, resistant to abrasion, cutting and to mineral oils and greases. Specially suited for the throughed conveyance of non alimentary bulk products, bucket elevators and any general heavy duty industrial applications in harsh working conditions.
|
|
Sandvik 1100C is a carbon steel with a hard, smooth surface and a
black oxide layer, which makes it suitable for any application with
a low risk for corrosion. Very good thermal properties make it
ideal for baking and for heating and drying of liquids, pastes and
fine-grained products
|
|
TRANSPROFIL belts have 15 mm or 25 mm high chevrons moulded and directly integrated in the cover of the conveyor belt. These profiles are produced in a very high quality (grade D) anti-abrasive cover.
The TRANSPROFIL is a chevron belt specially designed to meet the specific requirements of an increase in the angle of inclination of the conveyor. It will be used in cases in which a conventional conveyor belt is incapable of retaining the materials conveyed.
AREAS OF APPLICATION
- Mines
- Cement works
- Cattle feed
- Cereal silos
- Port installations
- Chemical fertilizers
- Sugar factories
- Quarries and sand pits
|
|
|
|
