|
|
Flush Grid Belts
Material: Polypropylene
General purpose belt; low coefficient of friction for accumulation applications; economical
Material: Proprietary High Temperature Composite
Composite material designed for part temperatures up to 392°F
Material: Polyethylene
Ideal for cold applications or those requiring superior chemical resistance
Material: Antimicrobial Polyethylene
Cold application belt with antimicrobial additive
|
|
|
|
|
|
Plastic Top Chain
Top plates and chain parts are made of engineering plastic and are connected using engineering plastic or stainless steel pins. Plastic top chains are used mainly in the food processing, beverage, dairy, and packaging industries.
RS Plastic Chain
The small pitch of RS plastic chain allows smaller diameter sprockets to be used, reducing the dead space between conveyors and ensuring smooth transfer of conveyed goods from one conveyor to another. The main markets for RS plastic chain come from the food processing, packaging, automobile, container, and pharmaceutical industries.
Beltop Chain
Beltop chain uses an alternating combination of interconnected modular engineering plastic links to transport goods in large quantities on wide, belt-shaped conveyors. Beltop chains are in demand in the corrugated cardboard, automobile, and food and beverage industries to replace conventional types in a variety of conveyor applications.
Also avaliable,
Stainless Steel Top Chain
Stainless steel top chain uses highly corrosion-resistant stainless steel for key components. Stainless steel top chain offers a higher maximum allowable load than standard plastic top chain and is especially suitable for transporting steel components or glass containers via direct mounting.
|
|
EUROBELT® SERIES 30 PERFORATED FLAT TOP, with a 17% of open area, has a completely smooth grille-shaped surface, with small openings completely straight and without obstacles, having the following dimensions in millimetres: [2 x 5] and [2 x 8].
This is the suitable belt for applications in which a drainage through the belt is needed and the product to be transported is small.
|
|
Advantages of uni modular plastic belt:
- Easy to clean, Single Link™ no brick lay
- Strong and thick product supports allow more load without breakage
- Quick and easy assembly/disassembly with the new Lockpin
- High tensile strength with reinforced side flexing belts
- Easy to clean Roller Top belt for crate/box accumulation
- More load/longer conveyors with unique sprocket engagement
- ED.A. approved materials and U.S.D.A. accepted products
|
|
EUROBELT® SERIES 20 FLAT TOP, thanks to its closed surface, is the suitable belt for all those applications in which it is not necessary any drainage through the belt and / or the product to be transported is small so that it could get caught on the holes of a belt with some open area.
Its completely flat surface avoids the falls of product and the resulting blockage of the line.
|
|
Rexnord® TableTop® Chains
Engineered to satisfy a wide range of conveyor applications for virtually any industry
Straight running and side-flexing chains
Chains formed from metal or molded from thermoplastic for high strength and speed
Narrow widths are ideal for multiple strand and variable speed conveyors
Chains with low backline pressure rollers minimize product damage
Several chain series couple traditional top plates with roller base chain for increased strength and precision
Rexnord® MatTop® Chains
Continuous conveying surface for applications demanding greater width requirements
Available in both assembled-towidth and molded-to-width configurations
Pins extend the full width of the chain ensuring maximum strength
Provides smoother conveying surfaces
Smaller pitch chains available to minimize the size of dead plates
Engineered to satisfy a wide range of conveyor applications for virtually any product size
|
|
| ... products without technical information |
| |
|
|
|
|
VARISORT CME-P - Combined colour and metal separation system for plastics recycling applications (material fed by conveyor)
The VARISORT CME-P combined colour and metal separator is designed for use in the plastics recycling industry to remove metal (cans, foil-lined Tetrapaks etc) and off-colour contaminants (bottles, cups etc) from plastic bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
Advantages:
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design
• evaluation of the entire visible light spectrum
• self-teaching evaluation electronics
Typical applications:
• removes cans from lightweight packaging
• removes off-colour plastic bottles
• removes metals/off-colours from specialized plastics
|
|
|
|
|
|
MAG 4300 ME-P - Metal separation system for plastics recycling applications
The MAG 4300 series of metal separators, used in the plastics industry, removes metal contaminants eg aluminium, steel or stainless steel from regranulate. The flow of regranulate is widened on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of good material. The rest of the material, free of metal contaminants, then continues along the conveyor.
Advantages:
• removes all types of metal, including stainless steel
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design
Typical applications:
• removes pump dispenser springs and balls from PET flakes
• removes aluminium from HD-PE flakes
• removes stainless steel from PVC window regranulate
|
|
SPEKTRUM CE-P
Off-colour separation system for plastics recycling applications
Spektrum colour separation systems remove off-colours from a flow of plastic bulk materials. The material to be inspected is spread out on a conveyor and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
|
|
|
The Marathon Pelletizer give exceptionally long production runs without maintenance shutdowns. It produces the high quality pellets required for today's advanced/engineering materials applications. The easy access features allow maintenance to be done quickly, on line, for increased productivity.
|
|
Blades Granulators for granulation and recycling of various objects of large sizes such as: Pallets, Drums, Vases, Films, Crates, Rolls, Vulcanised Rubber etc...
MAIN FEATURES : robust, high capacity, easy to clean and for maintenance, sieve changing by pneumatic piston, open and closing hopper by hydraulic system powered by motor.
|
|
The plastic Pulverizer on the market can be broadly into the following categories:
(A) hard plastic pulverizer, the pulverizing machine suitable for all types of small and medium-sized plastics plate.
(B) strong plastic pulverizer.
(C) the plastic pipe pulverizer.
|
|
Recycling lines
The CR recycling machines built by Carnevalli were designed to process flexible plastic materials , aiming the best cost-benefit ratio, such as : HDPE,LDPE,LLDPE< PP, and many other.
The main goal of these machines is to meet the need of flexible packaging manufacturers to process and recycle their own waste or scrap originated by their converting processes and also to those companies dedicated to the sole purpose of re-granulating these wastes to sub supply plastic processing companies.
All sizes of CR machines are fitted with degassing systems to allow recycling of printed materials.
|
|
Recycling Lines:
Recycling lines to reclaim plastic out of waste like oriented HDPE/PP Tapes, cuttings of woven fabric, industrial plastic wastes and general purpose wastes like LDPE/LLDPE/ HIPS/PP/HDPE/Polyester etc.
|
|
| ... products without technical information |
| |
 see the results for the following category : Inserts |
|
|
