|
|
The Chevron secondary belt cleaner uses the speed and force of the belt rolling over our patented rubber disks. The unique rotary fingers are forced against the base of the chevrons to dislodge material from the belt.
- Sweeping Action - of each disk cleans in front of and behind each and every chevron.
- Easy Maintenance - no motors, air nozzles, or other problematic equipment to maintain.
- Works Great - in the pulp and paper, fertilizer, potash, and other bulk material industries where chevron style belts are heavily used.
- Solid or Notched - 8” (200mm) diameter abrasion resistant rubber disks are available depending on the height of the chevrons and the conveyor belt speed.
|
|
|
Flexco Chevron Belt Cleaner takes a new approach to cleaning chevron, cleated, and raised rib belts. Hundreds of rubber fingers create a rotary cleaning action that easily flicks carryback off the belt. And without the typical clogging and rapid wear problems associated with brush-type cleaners. Now there is a better solution for wet sand belts, wood chip belts and other raised top or grooved belts.
|
|
|
Our brushing machine type BM 1138 has been constructed previously for heavy-duty conveyor belt cleaning in coal mines and foundries. Today we supply it for almost all kinds of industry where conveyor belts have to be cleaned.
|
|
|
|
|
|
MARTIN® Brush Belt Cleaners are specially suited for the removal of fines and residue from ribbed, flighted, grooved, or chevron belts. Versions are available to suit your conditions and your budget.
Motor-Driven Cleaning Action
One or two-horsepower motor (depending on belt width) turns brush against belt motion.
Match Cleaner To Requirements
Specify the cleaning system to suit your conditions and your budget.
MARTIN® Standard Brush Cleaner
MARTIN® Standard (Spiral) Brush Cleaner is value-priced answer to belt cleaning problems.
MARTIN® Strip Brush Cleaner
Uses 12 brush strips to form cleaner that sheds even moist material that would plug other brushes.
Brushes To Fit Need
MARTIN® Standard (Spiral) Brush Cleaner uses 0.38 inch (0.96 mm) polypropylene bristles wrapped in spiral around the hub. MARTIN® Strip Brush Cleaner forms brush from strips with 0.40 inch (1 mm) polypropylene bristles. Other materials and bristle diameters are available.
Martin Engineering is the world’s leading developer and manufacturer of engineered conveyor belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for belt cleaner engineering and performance.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End users (and other cleaner manufacturers) have accepted it almost universally.
|
|
Primary or Pre-Cleaners
Belt cleaners are an essential part of any conveyor system. Belt cleaners help remove product carry back and prevent it from falling off at various points along the return side of the belt causing various housekeeping and maintenance problems. Carry back can lead to:
- Excessive buildup and wear on belt idlers and pulleys
-Conveyor belt misalignment due to the artificial crown created by the carry
back.
- Accumulation of material falling off idlers and structure to the ground or on buildings, vehicles or even people
- Negative and unsafe work environment
|
|
Secondary Cleaners
Belt cleaners are an essential part of any conveyor system. Belt cleaners help remove product carry back and prevent it from falling off at various points along the return side of the belt causing various housekeeping and maintenance problems. Carry back can lead to:
- Excessive buildup and wear on belt idlers and pulleys
- Conveyor belt misalignment due to the artificial crown created by the carry back
- Accumulation of material falling off idlers and structure to the ground or on buildings, vehicles or even people
- Negative and unsafe work environment
|
|
|
|
|
|
Installed on the face of the discharge pulley below the material trajectory, Martin Engineering Pre-Cleaners remove carryback with firm but gentle pressure.
Pre-Cleaners remove the majority of carrryback, leaving only fines and slime for the follow-up secondary cleaning systems. This multiple-cleaner system provides effective cleaning without becoming overwhelmed by an onslaught of material.
Martin Engineering offers pre-cleaners in a variety of color-coded high-performance urethanes to provide the best solution for challenging application requirements.
MARTIN® SHD Belt Cleaner
Massive Construction
Structural steel means no more bent mainframes, even with high tonnages and large lumps. Massive urethane blades provide up to 12 inches (305 mm) of wear life.
Engineered System
MARTIN® SHD Belt Cleaner and tensioner are designed together for effective cleaning and reduced service requirements.
Constant Angle Blade Design
Patented "CARP" continuous angle curved blade provides effective cleaning across all stages of belt cleaner blade life.
MARTIN® SHD Belt Cleaners are protected by U.S. Patent Numbers 4,917,231; 6,493,373.
Martin Engineering is the world’s leading developer and manufacturer of engineered conveyor belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for belt cleaner engineering and performance.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End users (and other cleaner manufacturers) have accepted it almost universally.
|
|
RFT Primary Belt Cleaners enable the recovery of almost all the product adhering to the conveyor belt
The belt cleaners can be fitted on all types of smooth belts, including reversible belts
The belt cleaners are equipped with blades specifically designed for the product to be cleaned off: carbide, polyurethane, nylon (blades are approved for food use)
ADVANTAGES
- No modifications are required to your existing equipment
- Fast return on investment
- Reduction of operating costs and reduced maintenance
- Easy to install and to maintain. Scraping tools (blades in carbide, nylon or polyurethane) are interchangeable.
- Extremely long lifespan of the equipment;
- Easy to use
|
|
|
|
|
|
Eliminator® R-Type®
For superior cleaning in reversible belt applications.
Eliminator® Belle Banne® U-Type®
Features superior belt cleaning efficiency - especially in tough applications with wet, sticky carryback materials. Also excellent for cupped conveyor belts and belts with worn centers.
Eliminator® P-Type®
For applications where space is at a premium, the Eliminator® P-Type® and P-Type® LS belt cleaners are compact, secondary cleaners.
Eliminator® I-Type%u2122
This secondary belt cleaner's unique I-Power cushion design keeps the cleaning tips at a constant 90° angle to the conveyor belt for maximum cleaning.
Eliminator® High Temperature Precleaner
The ideal precleaner for vulcanized conveyor belt applications that routinely exceed 180° F (100° C).
Eliminator® H-Type®
The H-Type® is suitable as a single cleaner in light- or medium-duty applications. And in heavy-duty applications, the H-Type can be teamed with Eliminator® secondary cleaners.
Eliminator® High Temperature Secondary Cleaner
The High Temperature Secondary works in ambient temperatures up to 400°F (204°C) with spikes to 450°F (232°C).
|
|
HD-Series
- Pre-scraper for light to heavy duty belt cleaning applications
- Installed on the head pulley in 3 o'clock position
- Belt widths fromm 400 mm to 2400 mm
- Belt speeds up to 7.5m/s
|
|
Pre-Scraper Type B9
For many years HOSCH Scrapers have been at the forefront of belt cleaning technology, always meeting the exacting requirements of modern conveying systems at low operating costs.
The HOSCH Type B9 Scraper with segmented blades is recommended as a Pre-Scraper and as a Head Drum Scraper and is especially effective for removing heavy residue of materials adhering to belt surfaces.
When installed with the HOSCH patented Sprung Blade Scraper as a secondary unit the Type B9 Scraper contributes to the cleaning efficiency of the system.
The polyurethane blades which are inclined against the direction of belt travel, ensure effective cleaning of the belt and at the same time optimum removal of material.
With the addition of Reversing Elasto Assemblies, the Type B9 Scraper will operate on reversing belt systems without restrictions.
|
|
|
|
|
|
Martin Engineering Secondary Cleaners provide the final precision cleaning to remove the carryback that has passed the pre-cleaners.
Depending on material and conditions, some applications may require more than one secondary cleaner, or even the installation of tertiary cleaning systems to remove the remaining fines and water from the belt.
One or more secondary cleaners should be installed at the point where the conveyor belt is leaving the head pulley. If that point is inaccessible, the cleaner(s) should be moved further along the conveyor return, to a point where the belt is firmly supported against a roller to allow the application of firm cleaning pressure.
HAWG BONE® Secondary Cleaner
Hammer Maintenance Saves Time
Blade replacement is fast and easy; just pound out worn blades and pound in the new ones.
No Damage To Splice Or Blade
Resilient urethane cleaning elements absorb impact, let splices pass without damage.
Durable & Long-Lasting
Rugged, one-piece molded urethane elements stand up to tough conditions.
Martin Engineering is the world’s leading developer and manufacturer of engineered conveyor belt cleaning systems. In this position, Martin Engineering has developed fundamental principles of cleaner design that have set standards for belt cleaner engineering and performance.
The multiple-cleaner system originally adopted by Martin Engineering is now the standard for applications on belt conveyors carrying all types of bulk materials around the world. End users (and other cleaner manufacturers) have accepted it almost universally.
|
|
|
|
|
|
RSJ, Secondary belt cleaners enable the recovery of almost all the product adhering to the conveyor belt. The belt cleaners are equipped with - high-performance carbide or ceramic cleaning blades; these are slightly convex to give a perfect contact area to the belt.
They are equipped with a unique "active parallelogram" spring tensioning system
2 types of secondary belt cleaners are available : with single or double blades
ADVANTAGES
- Easy to install. Compact and suitable for new or existing installations- even on reversible belts.
- Easy to use : Blades are interchangeable, and can be changed in accordance with the product being conveyed
- Quality : Convex blades give a perfect contact area to the belt.
- Extremely long lifespan of the equipment
- Cost effective: In case of wear, only the blade tip is changed, not the support system
- Profitability and Pay-back: Optimisation of conveyor throughout and reduction of cleaning operations
- All stainless steel cleaners
- Cleaning with a single blade across the full width of the belt
- Double bladed secondary belt cleaners enable belt cleaner efficiency to be optimised with a single tensioning operation: economic and takes up little space
|
|
Our motto is "Reliability in Conveying". It means we develop, manufacture and market conveyor components and accessories that increase the reliability of our customers conveying operations.
Trellex products increase up time, improve the environment and reduce the need for maintenance. They feature smart simple design that makes them efficient, rugged and maintenance friendly.
Our range includes systems for belt guiding, cleaning (scrapers, modular brushes, ...), conveyor hoods, loading stations, pulley & roller laggings, sealing systems, ...
Just check out the website to get to the full range and to download any brochures
|
|
Now there is a new urethane-blade precleaner that outperforms other “hot” blades. The High-Temp ConShear™ Blade is designed for continuous, ambient temperatures up to 275ºF (135ºC) and spikes to 325ºF (163ºC). This bright yellow blade takes the heat and yet provides the extended wear life of Flexco’s standard ConShear™ blade.
More wear life means fewer blade change-outs. And a visual check tensioner makes maintenance easy. A quick measurement of the tensioner spring lets you know if the blade is at optimal tension. If retensioning is needed, simply turn the adjusting nut to restore optimal cleaning tension. Comes standard with a blade length of belt width minus 2".
|
|
Type B6
The special features of the Type B6
- Excellent cleaning efficiency
- Low operating costs
- Optimum belt protection
- Self adjusting
- Minimum installation and maintenance
- Extremely long operating life
- Highly abrasion-resistant blades for all types of materials being conveyed
- Suitable for all belt widths and belt speeds
- Excellent durability
- Low space requirement due to compact dimensions
- Reversing operation
- Optional designed for specific applications
|
|
Type C1
The new dimension
Smaller, lighter -
With advanced technology
- The HOSCH Sprung Blade Scraper Type C1 with self-adjustment aligns itself automatically according to the belt thickness / profile.
- The matching components of the construction kit can be assembled as required.
- The scraper system offers easy assembly on site and flexibility to suit any conveyor frame.
- The modules offer maintenance free self-adjustment and push-in fastening.
- The module cleaning tips can be individually adjusted up and down.
- Type C1 means greatly improved HOSCH precision cleaning with a compact unit and more user-friendly.
|
|
Type C3
The new dimension for larger conveyor belts -
Extending the advanced technology
- The HOSCH Sprung Blade Scraper Type C3 with self-adjustment aligns itself automatically according to the belt thickness / profile.
- The matching components of the construction kit can be assembled as required.
- The scraper system offers easy assembly on site and flexibility to suit any conveyor frame.
- The modules offer maintenance-free self-adjustment and push-in fastening.
- Type C3 means greatly improved HOSCH precision cleaning with a compact unit and more user-friendly.
HOSCH Sprung Blade Scraper
Reliable state of the art
- Unsurpassed cleaning efficiency
- Installed in all industries
- Low operating costs
|
|
| ... products without technical information |
| |
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
Mink Vee-belt brushes (BKR) – Moderate prices and prompt delivery
Mink Vee-belt brushes are resistant to dust, dirt, moisture, oil, grease and common chemicals. Moreover, they’re ideal for use in small spaces. They can be supplied in both open-ended and endless versions. And because we know that you never like to wait, we keep the most important types in stock. They’re inexpensive and can be delivered promptly.
Advantages:
• Practical solutions for immediate use
• Extremely rugged
• Working temperatures: -15°C to +80°C
• Belt speeds up to: 20 m/sec.
|
|
Technical Data
- Scrubbing width [mm] 850
- Squeegee width [mm] 1010
- No. of brushes 2 (disc)
- Productivity [sqm/h] 5525
- Solution tank capacity [l] 110
- Recovery tank capacity [l] 115
- Power installed 24V (4x6V)
- Max speed [Km/h] 6,5
- Weight (net) [Kg] 231
- Dimensions (LxWxH) [mm] 1504x909x1201
|
|
Technical Data
- Scrubbing width [mm] 678
- Squeegee width [mm] 1010
- No. of brushes 2 (disc)
- Productivity [sqm/h] 3051
- Solution tank capacity [l] 70
- Recovery tank capacity [l] 75
- Power installed 24V (2x12V)
- Max speed [Km/h] 4,5
- Weight (net) [Kg] 94,5
- Dimensions (LxWxH) [mm] 1220x748x960
|
|
|
|
