- Hydraulics - Pneumatics >
- Pump >
- Cooling pump
Cooling pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 0 m³/h - 4 m³/h
Pressure: 10 bar
Head: 0 m - 8 m
... circulator pump takes reliability in small domestic circulators to new heights. Even in systems where the operational environment is a challenge, the ALPHA2 will ensure long-lasting trouble-free operation ...
GRUNDFOS
Flow: 1,000 l/h
Pressure: 0.85 bar
Power: 80 W
For reliable and efficient support of different thermal circuits: The Bosch coolant pumps PAD and PCE are designed with decades of experience in thermal, liquid and energy circuits. Due to their robustness ...
Flow: 950 m³/h
Pressure: 0.5 bar
Power: 42 W
... temperature control even at low flow rates: The Bosch water circulation pump is characterized by a stable PWM control at low speeds. With its very robust design with ceramic shaft and washer, the pump ...
Flow: 1,200 l/h
Pressure: 0.65 bar
Weight: 0.65 kg
For reliable and efficient support of different thermal circuits: The Bosch coolant pumps PAD and PCE are designed with decades of experience in thermal, liquid and energy circuits. Due to their robustness ...
Flow: 170,000 m³/h
Head: 110 m
The VCT mixed-flow circulating pump is designed for continuous duty wet-pit applications requiring large capacities at relatively low pressures. Often used in power plants, desalination, cooling water, ...
Flow: 15,000 m³/h
Head: 450 m
Power: 15,000 kW
... booster water/oil pipeline Ammine and solution processes in oil and gas Cooling water and generic industrial high flow transfer The Baker Hughes family of BB1 pumps includes three product ...
Flow: 3 m³/h - 250 m³/h
Pressure: 0 bar - 16 bar
Head: 9 m - 100 m
... volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733, or in in-line design. Main ...
KSB S.A.S. - France
Flow: 4.3 l/min
Pressure: 25 MPa
Power: 2.2 kW
... for every painter who works on large projects. The diaphragm pump is reliable and requires little maintenance, thanks to inlet valves with a three times longer service life and improved cooling for reduced ...
Flow: 57 m³/h
Pressure: 2 bar
Head: 0 m - 12 m
... Submersible pump for stationary and portable wet well installation. Pump with fitted float switch for fully automatic operation. Liquids For the pumping in domestic areas of: Sewage not containing ...
Wilo
Flow: 0 m³/h - 80 m³/h
Power: 0 W - 3,000 W
The FTP gear pump from Marzocchi is an ideal solution for low-pressure lubrication applications where low-viscosity fluids are required, such as fire-resistant ones. Typical applications include large lubrication systems, ...
Flow: 8 l/min
Pressure: 0.2 bar
Head: 2 m
... Applications: Designed for continuous operation in chillers, coolers, vending and general water applications; Ideal for shelf coolers
FLOJET
Flow: 9.8 l/min
Pressure: 2,500 bar - 3,000 bar
Power: 33, 30, 45, 41 kW
... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...
WOMA GmbH
Flow: 34 l/min
Pressure: 3,000 bar
Power: 95 kW
... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...
WOMA GmbH
Flow: 34 l/min
Pressure: 2,000 bar - 3,000 bar
Power: 124 kW
... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, ...
WOMA GmbH
Flow: 0.06 l/min - 3 l/min
Pressure: 35 bar
Power: 0.44, 0.55, 0.18, 0.25, 0.37 kW
Gear pumps up to 3 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for base mount. ADVANTAGES - Economical through closed circuit - Environment friendly - Function ...
Flow: 0.06 l/min - 3 l/min
Pressure: 35 bar
Power: 0.18, 0.25, 0.37, 0.55 kW
Gear pumps up to 3 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for a sub-base mount. ADVANTAGES - Economical through closed circuit - Environmentally friendly - ...
Flow: 17, 9, 13, 6 l/min
Pressure: 35 bar
Power: 1.5, 0.75, 1.1, 0.55 kW
Gear pumps from 6 to 17 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for a base mount. ADVANTAGES - Economical through closed circuit - Environmentally friendly - ...
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW
... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... LSC pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Flow: 15, 25, 40, 65, 110 m³/h
Pressure: 12 bar
Fluid temperature: 250 °C
... vane pumps can be dismantled without disconnecting the suction and discharge lines. Pump reassembly requires no special positioning Replacement parts are extremely competitive The pump ...
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 0.4 m³/h - 4.98 m³/h
Pressure: 1 bar - 4 bar
Power: 1.1 kW - 1.5 kW
... PERISTALTIC TUBE PUMP - ALBIN PUMP Specifications: Flow rate: up to 4,98 m3/h (22 gpm) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, ...
Albin Pump
Flow: 0.3 m³/h - 2.2 m³/h
Pressure: 1 bar - 15 bar
Power: 1.1 kW - 2.2 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 2,2 m3/h (10 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... bearings. CombiTherm is designed to require no external cooling when working within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump ...
Johnson Pump
... CombiTherm Plus is designed to require no external cooling when working within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump ...
Johnson Pump
Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m
... duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber and seal cartridges to API ...
Johnson Pump
Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C
The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps are designed ...
DESMI Pumping Technology A/S
Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C
Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes ...
DESMI Pumping Technology A/S
Flow: 0.03333 m³/s
Head: 2 m - 42.5 m
Power: 1.1 kW - 12.5 kW
Submersible pump, with oil bath motor, for cooling and lubrication of the bearings and a double mechanical seal, oil bath (motor side) and water bath (pump side). Suitable for construction ...
EBARA PUMPS EUROPE
Flow: 0 m³/h - 2,300 m³/h
Head: 0 m - 97 m
Power: 0 kW - 400 kW
PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation ...
SAER
Flow: 0 m³/h - 580 m³/h
Head: 0 m - 90 m
Power: 75 kW
IN-LINE PUMPS Safe, highly efficient, adaptable and durable, the L range of in-line pumps with in-line fittings can pump fluids of up to 140°C as standard. They are used for circulation ...
SAER
Flow: 0 m³/h - 1,700 m³/h
Head: 0 m - 500 m
Power: 0 kW - 500 kW
PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation ...
SAER
Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW
Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...
Brinkmann Pumpen
Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW
Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not ...
Brinkmann Pumpen
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
Immersion Pumps Our multistage pump models (S)TC25...(S)TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers ...
Brinkmann Pumpen
Flow: 0.3, 0.5, 1, 2 l/min
Pressure: 1,000, 670, 250, 160 bar
... hazardous environmentscan be configured with four different pump heads (double piston design)easily changeable pump headspump heads can be equipped with eluent cooling or heating devicemaintenance-free ...
Flow: 5 l/h - 8 l/h
Head: 2.5 m - 5 m
... Sinks Cooling PC Cooling / CPU Cooling Electronics Cooling Laser Cooling Chiller Systems Liquid Transfer Get more ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
... maintenance. 7. Low power consumption. 8. Small footprint. Application: Data center Cooling / Servers Cooling Radiator Cooling / Heat Sinks Cooling PC ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C
... Chillers, Cooling Circulation, Beer Brewing Chillers ● Home Appliance Boosting ● 3D laser cooling,printer ● Air Purifying Humidifier For more product & factory information, please ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW
... steel valve plates and forced air cooling systems, they can work long hours with little maintenance. This EXTREME 15 BAR pumping unit version comes with a 1,5Hp motor in single-phase and it can reach ...
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Bgs General Srl
Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Bgs General Srl
Flow: 100, 120 m³/h
Pressure: 10 mbar
Weight: 35 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Bgs General Srl
Flow: 4 l/min
... terminal to plug, reliable performance, not easy to break. Sprayer pump, PPS material parts, high hardness, not easy to deform, no leaking. Suitable for use in water pump, welding gun cooling, ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining