Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m
... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...
Franklin Electric
Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW
The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also ...
Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m
... towards the drive end, without the pump casing having to be disconnected from the piping. If a spacer coupling is used it is also unnecessary to disconnect the motor. Applications: Series CBT volute casing pumps ...
Flow: 0 l/h - 4,800 l/h
Pressure: 0 Pa - 4,500,000 Pa
Fluid temperature: 5 °C - 180 °C
Contamination free design All liquid end parts are made of fluoro resin with best resistance against heat and aggressive chemicals. Fiercely corrosive liquids are transferred safely without particulate ...
Flow: 0 l/h - 2,400 l/h
Pressure: 0 Pa - 400,000 Pa
Fluid temperature: 5 °C - 100 °C
Contamination free design All liquid end parts are made of fluoro resin with best resistance against heat and aggressive chemicals. Fiercely corrosive liquids are transferred safely without particulate ...
Flow: 227 m³/h
Pressure: 26 bar
Head: 128 m
The IPP is a horizontal process pump designed to dimensionally meet the ANSI / ASME B73.1-2001 standard. This versatile pump efficiently handles a wide range of corrosive and non-corrosive ...
Flow: 2,317 m³/h
Pressure: 40 bar
Head: 160 m
... Chem is a chemical sump pump with a semi-open impeller, designed for corrosive wet pit applications. API design is available upon request. Overview Ruhrpumpen manufactures a total of 19 standard sizes ...
Flow: 0.2 l/min - 3 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...
Anglada Pumps
Flow: 0.45 l/min - 8 l/min
Pressure: 0 Pa - 1,000,000 Pa
Head: 0 m - 100 m
The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...
Anglada Pumps
Flow: 1.66 l/min - 25 l/min
Pressure: 0 Pa - 1,000,000 Pa
Head: 0 m - 10 m
The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...
Anglada Pumps
Flow: 4,500 l/h - 60,000 l/h
Pressure: 0 bar - 1.8 bar
Head: 0 m - 8 m
... TE25, TE30 models. The unit pump performance representative, for each model, of the relationship between the capacity (l/min) and the pressure exercised by the unit pump (height expressed in metre) ...
Flow: 0.0039 l/min - 3 l/min
Pressure: 5 psi - 50 psi
Fluid temperature: 60, 49 °C
... bellows module, forcing fluid in and out of the module. Discharge pressure is maintained over the entire flow range of the pump. Standard Bellows Metering Pumps are designed to displace ...
Flow: 722 m³/h
Head: 105 m
Fluid temperature: 232 °C
API 610 11th edition, compliant VS4 sump pump The Model 3171 is the Veteran vertical sump and process pump. Thousands of installations in industrial process, sump drainage, corrosive ...
Pressure: 0 bar - 320 bar
... benefiting from the best combination of reactors and pump flanges from both a technical and economical perspective. The new gear geometries facilitate differential pressures of up to 320 bar for selected pump ...
WITTE PUMPS & TECHNOLOGY GmbH
Ex ot ic met al pumps are avail a ble with mag net ic drive. Their hy drau lic char ac ter is tics are iden ti cal to those giv en for stand ard pumps on the pre vi ous pa ges. Ex ot ic met al mag net ...
SGL GROUP
Flow: 0 m³/h - 900 m³/h
Pressure: 0 bar - 16 bar
... as unloading, stripping, circulating, transfer, blending or export pump for fluids with poor and good lubricity, clean or slightly abrasive/corrosive fluids, low and ...
Leistritz Pumpen GmbH
Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m
Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling corrosive, aggressive ...
CDR Pompe
Flow: 33 l/h - 2,700 l/h
Pressure: 0 bar - 10 bar
The PSF1, manufactured by Ragazzini, produces flow rates of 33 up to 2700 L/h and pressures of 8 up to 15 bar. Furthermore, it has a hose diameter of 26 mm.
RAGAZZINI
Flow: 200 m³/h
Pressure: 16 bar
Head: 90 m
The CM+ series pumps are specifically designed for the safe pumping of fluids posing an environmental or health hazard such as acids, alkalis, solvents or chemically contaminated fluids. ...
MUNSCH Chemie-Pumpen GmbH
Flow: 0 m³/h - 480 m³/h
Power: 1.5 kW - 30 kW
Fluid temperature: -85 °C - 200 °C
... aggressive, highly corrosive liquids, paper, food processing, plant engineering and construction. For all industries that choose a pumping leak-free and low maintenance for use continuous (abandon of mechanical seal ...
M PUMPS
Flow: 0 us gal/min - 84 us gal/min
Pressure: 0 bar - 17 bar
The Isochem centrifugal pump was designed with the user in mind. The features found in the CMC and CMH Series provide the user with a safe, leak-free installation, and long operating life. Isochem centrifugals are designed ...
Pulsafeeder
Flow: 0 us gal/min - 120 us gal/min
Head: 70'00"
Power: 0.75, 0.4, 0.5 kW
MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘F’ (155ºC), rated IP68. BALL BEARINGS The rotor shaft is carried in two single row, deep groove ...
Mody Pumps (Europe)
... steel drum pump for corrosive liquids developed by RDC Rodicar. It is specifically designed to cater applications with highly corrosive products. The core of this pump ...
Flow: 0 l/s - 17.5 l/s
Power: 2 kW
... 10, it is hard to find an application that can't be handled by the Inox pumps. All materials in contact with the liquid are made out of AISI 316 stainless steel or better.) Pump type: Electrical ...
Grindex
Flow: 400 m³/h
Pressure: 48 bar
... These pumps can transfer corrosive products, sludge and very viscous fluids. The maximum capacity is 400 cubic meters per hour, and they can handle a maximum pressure of 48 bar. The maximum ...
Flow: 681 m³/h - 1,703 m³/h
Head: 23 m - 125 m
The Magnum XP pump is single-stage, single-suction centrifugal mud pump. It is suitable for handling big capacity of abrasive, corrosive and plain tough slurries. The small ...
Shijiazhuang Sunbo Pump Co., Ltd
Flow: 0 m³/h - 1,600 m³/h
Pressure: 10 bar
Fluid temperature: 120 °C
... Horizontal centrifugal pump covered with ebonite for corrosive fluids OH0. Single stage with channel impeller. For pumping acids, especially: hydrochloric acid, diluted sulphuric acid, ...
... of viscosity High capacity and very compact Handles a variety of corrosive liquids Uses only one mechanical seal Stainless Steel construction for long life Easy assembly/disassembly ...
Flow: 0 l/min - 830 l/min
Pressure: 0 bar - 80 bar
Three-Screw pump for non lubricating fluids Pumped Liquid Non- or mal-lubricating, slightly abrasive, corrosive Main Fields Of Application Process engineering, ...
Please specify:
Help us improve:
remaining