|
|
Digital position indicators of SIKO, to read directly adjusted values is made possible, thereby the display value can be chosen for every single pitch. Several display values are realized by transmission gear.
Depending on applications, several unit sizes are available, small shaft diameters for less space up to position indicators for huge shaft diameters.
|
|
Large, well illuminated clear display, on-hand-operation by THUMB-WHEEL, rigid housing.
Portable Digital-Thermometer:
- C100: 1 channel, for Pt 100 (4-wire)
- C110: 2 channels, for 1 x Pt 100 and 1 x Manufacturers of thermocouple
- C120: 2 channels, for 2 x Thermocouple, indicating also differential temperature
Portable Indicator for Humidity:
- E200: Temperature and relative humidity, with rigid probe
- C200: Temperature and relative humidity, with rigid probe
- C210: Temperature and relative humidity, with flexible probe
Portable Digital pressure gauge:
- C300: Barometer (barometric air pressure)
- C310: -500...+500 Pascal pressure+vacuum+differential
- C320: -100...+100 mbar pressure+vacuum+differential
- C330: -1000...+2000 mbar pressure+vacuum+differential
Portable Universal Indicators:
- C900: for all professional transmitter with standard signal output (e.g. 4...20 mA, with power dosing for the transmitter)
e.g., together with our industrial pressure transmitter, as Portable Digital Manometer, ranges 0...10 mbar up to 0...2000 bar available. |
|
| ... products without technical information |
| |
Ultrasonic Liquid Leveller
The Link Instruments ULLC2001 Ultrasonic Level Comparator is one of the most advanced Liquid Levellers on the market. Both extremely easy to use and micro-pic controlled for greater precision in measurement. The transducer is placed against the professional cylinder body 120mm below the calculated liquid gas level, (normally mathematically calculated). While retaining the transducer at this point the Comparator's ultrasonic level is set to around two or three divisions / bars-¡¡¡, by use of the 0-10 Tune Control. This gives a reference level against which the signal at the gas level / air interface is compared.
By slowly sliding the transducer up the cylinder body, you will arrive at the gas level / air interface. At this point the signal will rise sharply and this is visible on the Comparator usually as all 16 divisions / bars- appear and is due to the enhanced propagation of the Surface Acoustic Wave (INDUSTRIAL SAW), across the liquid gas. |
|
Slim Type ABS Digimatic Indicator ID-N/ID-B:
- Slim 35 mm wide body greatly enhances application range.
- Various features including waterproofness, display inversion, and back plunger.
ABS Digimatic Indicator IDS: Simplified economy type with a single function.
ABS Digimatic Indicator IDU: Single-function, economy type with a measuring range of 25.4 mm.
ABS Digimatic Indicator IDC:
- Widely used as a general-purpose, multifunction indicator
- Model provided with various measuring ranges, measuring forces, etc. |
|
Electronic dial gauge with additional functions such as min / max, TIR and tolerance indicator lights.
- Switchable sensitivity
- 0.01mm, 0.001mm / 0.0005", 0.00005"
- Direct Inch / Metric conversion
- Preset
- Zero setting
- Memory hold
- Ref I / Ref II
- Min / Max memory
- Display Min / Max
- Setting and display of tolerance limits
- Preset value recall
- Selection of measuring direction
- Half duplex transmission |
|
• Digital display LCD, height of digits 6 mm
• Water and coolant resistant, protection IP65 according to IEC 529
• Data output RS 232 combined with external power supply manufacturer
• Polyamide case, fixed display
• Stainless steel measuring pin
• Interchangeable contact point M2.5
• Clamping: Stem Ø 8-h6 in hardened and ground stainless steel and dovetail back
• Self-contained use: 5000 hours continuously
• Automatic power shut down |
|
Large, well illuminated clear display, on-hand-operation by THUMB-WHEEL, rigid housing.
Portable Digital-Thermometer:
- C100: 1 channel, for Pt 100 (4-wire)
- C110: 2 channels, for 1 x Pt 100 and 1 x Manufacturers of thermocouple
- C120: 2 channels, for 2 x Thermocouple, indicating also differential temperature
Portable Indicator for Humidity:
- E200: Temperature and relative humidity, with rigid probe
- C200: Temperature and relative humidity, with rigid probe
- C210: Temperature and relative humidity, with flexible probe
Portable Digital pressure gauge:
- C300: Barometer (barometric air pressure)
- C310: -500...+500 Pascal pressure+vacuum+differential
- C320: -100...+100 mbar pressure+vacuum+differential
- C330: -1000...+2000 mbar pressure+vacuum+differential
Portable Universal Indicators:
- C900: for all professional transmitter with standard signal output (e.g. 4...20 mA, with power dosing for the transmitter)
e.g., together with our industrial pressure transmitter, as Portable Digital Manometer, ranges 0...10 mbar up to 0...2000 bar available. |
|
ServiceJunior without professional yarn.
Little genius of the diagnosis
Description:
- Transmission without yarn of the data.
- Possibility of data acquisition on the long term.
- Digital display with lighting.
- Conceived for professional remote control.
- Kit containing the JuniorWin software for PC.
- Function selected of peak (posting with bars and function actuated needle).
- Measurement of the points of pressure at rate of 10 ms reading (function max. min/).
- Range 50 m minimum.
- Whole Posting of the scale.
- Simplicity of handling by 4 keys.
- Integrated Battery: lifespan 1.500 hours.
- Index of protector IP54.
- Beach of pressure: -1... 16 bar/0... 100 bar/0... 400 bar/0... 600 bar.
Advantages:
- "Intelligent" Management of the memory.
- Is based on technology without wire, no connection by cable towards the PC is not necessary.
- A faster transfer of the data Allows the PC.
- Direct and simple Connection of ServiceJunior on the hydraulic system.
- No other portable apparatus nor another sensor and cable are necessary.
- Simple Use with lower costs for better results.
- Robust Enclosure not dirtying.
Applications:
- Equipment tools
- Mobile Machines
|
|
The 2880B is a Dual Display 51,000 Count DMMs with exceptional accuracy and functionality. It offers superb performance with many features that are useful for trouble shooting electronic and electrical circuits or to test and evaluate circuits in a field service application.
# Features: True RMSACV and ACA
# 5 Digit LCD for both the primary and secondary professional displays
# 21 Segment analog bar graph
# Automatic polarity indicator
# 0.025% Basic DCV accuracy (0.03% for 2880B)
# Resistance measurements up to 500Mohm
# Conductance measurements up to 50nS with 0.01nS resolution
# Capacitance measurement
# Frequency with ACV measurement
# Data Hold
# dBm Measurement
# REL Mode
# 1ms Peak Hold for glitch capture
# Conforms to IEC-1010-1 600V CAT III and 1000V CAT II
# CE Approve
|
|
Chatillon® DFE Series
The Chatillon® DFE Series is a compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications, the DFE is available with capacities from 2 lbf (1 kgf, 10 N) to 500 lbf (250 kgf, 2500 N). The DFE features an integral loadcell with a measurement accuracy of better than 0.25% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be "hidden" from the operator. The DFE gauge may be specified with or without RS232 serial communication. All DFE Series force gauges come with a carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard.
Standard Gauge Measurement Functions
Normal Tensile and Compression Measurement
Peak Tension and Compression Measurement
Pass-Fail Limits
High & Low Setpoint Limits
Statistical Calculations
|
|
Mecmesin digital force gauges are state of the art instruments, specifically designed to measure force in tension and compression (push or pull) with optimum precision and performance.
The Advanced Force Gauge (Mark 4) is the most versatile and fully-featured instrument offered by Mecmesin. The AFG comprises of 10 different models ranging from 2.5N to 2.5KN with the added ability of 1st peak and ultimate peak hold. The bi-directional interface (RS232, Mitutoyo, Analogue) ensures full data transfer between PC's, data-loggers and Mecmesin stands. All AFG's feature superb accuracy at ±0.1% of full scale and a industrial sampling rate of 5,000 times per second.
The BFG (Basic Force Gauge) range of rugged, flexible and reliable instruments are designed for easy operation and outstanding force measurement performance - all at a budget price. A precise and reliable instrument, the BFG features accuracy at ±0.25% of full scale and a sampling rate of 1,000 times per second.
The CFG (Compact Force Gauge) is a pocket-sized, lightweight and low-cost force gauge, ideal for performing elementary tension and compression testing. The CFG is available in 3 capacities and features include a data sampling rate of 10Hz, accuracy of ±0.5% and versatile measurement options lbf, N, ozf, kgf and gf, with a resolution of 1:1000 or better.
Used either handheld or combined with a test stand and accessories they offer a complete testing solution for a virtually limitless range of tension and compression applications. |
|
Simple digital force gauge : CENTOR FIRST
Simple and yet complete, the CENTOR First force gauge uses efficient technology to simplify force measurements, in tension and compression ...
Graphical force gauge : CENTOR EASY
Simple and complete,the CENTOR "Easy" is the best instrument for measuring in the workshop.The screen provides simultaneous readout of the current and maximum values as well as...
Advanced graphic dynamometer : CENTOR STAR
The CENTOR "Star"has many functions.It will become your preferred force measurement tool.The graphic screen professional displays the complete Force=F(t) curve ,...
Two detection force gauge : CENTOR DUAL
It has all the functions of an STAR force gauge, but its calculation power enables it to record values sent by 2 different sensors simultaneously |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The latest generation of tools presents itself as extremely handy. Because the professional air supply comes from a separate professional blower, the Leister BRAZING PEN R reaches into the most inaccessible places. It also professional displays the welding temperature digitally.
• Worldwide the smallest industrial hand tool with digital display of set and actual temperature
• Fatigue-free working thanks to its ergonomic handle
• Heating element protection
• Cooled heating element tube
• Exact temperature control thanks to micro processor |
|
The MG3 represents the very latest technology in resistance weld monitoring; it provides precision real-time dynamic measurement of all the brazing variables.
With increased emphasis on accountability, the MG3 Digital Process Sentry offers the tools required for process development, production monitoring, data collection, and analysis to support your ISO, GMP and TQM requirements.
|
|
| ... products without technical information |
| |
|
|
