|
|
Counting & Weighing Machine ZWA :
Compact, combined counting and weighing machine for small parts of all kinds.
With closed and mobile rack.
Microprocessor steering, individually programmable.
Counting and weihging devices.
Adjustments for 200 products can be stored.
Speed: approx. 5 meters/min.
|
|
SC-12/24
Counting Machines SC-12 & SC-24
Counting - dosing machines for seeds.
- These machines are based on years of research in the field of counting seeds with high accuracy at a maximum possible speed.
- The machines consist of a small container where the seeds are stored, and a vibratory output specially designed for different seeds, without being involved in complicated adjustments.
- The seeds are spread by 2 additional vibrating channels, to bring them aligned one by one at a minimum distance between them.
- The seeds are fed through high sensitive photo-detectors, and by reaching the required number of seeds, a set of 2 different gates closes and allows the seeds to be dosed at the end one by one, while the channels being closed are used as collecting holder for the next dose
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
Specially designed for filling of all liquid and semi-liquid cosmetics (shampoo, conditioner, hair-dye, shower gel, bubble bath, liquid soap, milk, suntan milk, lotions, deodorant, roll-on, perfumes, etc), FLEXO is extremely easy to use thanks to mass flowmeters linked to a servodrive for the up/down motion of the nozzles.
The benefits are significant :
- excellent adaptation to all types of liquid
- simple, in-line filling system with no moving mechanical parts
- bottom-up filling of the bottles with variable up/down speed of the nozzles and programmable according to the shape and contour of the bottles to be filled
- increased speeds thanks to the continuous injection filling system (no pump suction cycle)
- optimized dosing accuracy
- standard cleaning in place (CIP) and standard sterilization in place (SIP)
- programmable cleaning speed according to the products (quality of the cleaning is optimized and the cleaning times reduced)
- option of installing 2 filling circuits in parallel, with cleaning in place (CIP) for one circuit while the 2nd circuit is filling and vice versa
- quick format changeovers without tools
- stainless steel guards with "balcony" design for optimized prophylaxis.
PKB deliberately chose standard mass flowmeters instead of electromagnetic flowmeters to avoid the issue of certain non-conductive products and the constraints of very precise pressure regulation in the feeder tank.
|
|
|
The UGC Vibrating Densitometer accurately measures the density of a flowing fluid at actual operating conditions. This Densitometer was primarily developed for extremely accurate fluid metering (custody transfer), plus many other applications, such as pipeline interface detection, blending, process control, etc. The frequency output of the Vibrating Densitometer is compatible with most flow computers.
|
|
The contactless and continuos measurement of the density of liquids or bulk material is requested in even more than the following applications:
Concentration measurement of acid, alkali, saline solution and suspension
Crystallisation and polymerisation monitoring
Determination of the solid matter content in slurries, in flue gas desulphurisation suspensions, in aluminium production and in mining
Measurement of the bulk density in washing powder and clinker
|
|
Microwave measurement for the sugar industry
An important parameter for the sugar production is the concentration of the sugar massecuite. Measurement of the dry substance content, usually represented as Brix is absolutely essential in order to optimize, control and improve the sugar quality.
Based on experience in process control, BERTHOLD TECHNOLOGIES provides products, which exactly match the instrument needs and expectations of customers producing sugar.
We offer specially designed microwave sensors for measurements in product pipelines, dissolved sugar containers, crystallizers and at other process locations. The Micro-Polar Brix provides accurate, reliable online concentration measurements of the sugar magma over the entire process.
|
|
Density Meter Series DIMF 2.0
Swagelok-screw joints, flange DN 15 PN 40, milk threads according to DIN 11851 PN 10
accuracy ± 0,2 kg/m³
reproducibility 0,05 kg/m³
operating temperature according to design -40°C to 210°C Accessoires
electronical transmitter
pre-amplifire
strainer
gas separator
processing peripherals
Density Meter Series DIMF 2.1
flange DN 25 / 50 PN 40
accuracy ± 0,2 kg/m³
reproducibility 0,05 kg/m³
operating temperature according to design -40°C to 150°C
|
|
|
The DENSITRAK® Model D625 liquid density meter utilizes the spring mass principle for measuring the fluid density. A portion of the "u" tube is energized to vibrate at its natural resonant frequency by using an electrical feedback driving system. A change in the vibrating mass, (as a result of change in the fluid density) shifts the resonant frequency. A CSI SPUD signal processing unit for density uses temperature, pressure and the shift in frequency to determine the density of the measured fluid.
|
|
|
|
|
|
PROCESS LIQUID IN-LINE DENSITY METERS DC-50 SERIES
LEMIS process DC-50 series of process in-line meters has been carefully engineered for continuous measurement of liquid density to fit large range of applications.
LEMIS process use streamlined resonant tube which is washed on either side by measured liquid. The oscillation period of the vibrating tube and its frequency characteristics depend on behaviour of the measured liquid allowing simultaneous and accurate direct measurement of density and concentration.
Large offer of factory pre-built installation packs allows quick and simple field installation with minimal pipeline disturbance or process downtime. The meter supplied with rigorous factory calibration for density. The DC-50 series proves high accuracy and long-term calibration stability insensitive to mounting position, plant vibration, process flow rate and pressure variations.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
|
|
|
|
The Thermo Scientific range of Sarasota liquid (gas) density meters measures density or density related variables within the oil and gas, petrochemical, chemical, food and beverage and general process industries. These high accuracy online continuous meters provide key information for process monitoring and control, quality control, product interface detection and custody transfer applications.
The Sarasota FD910 Industrial Density Meter is designed for high accuracy measurement of general process liquids and slurries, giving continuous online density or density related measurement with straight-through flow. Built to be insensitive to plant/pipeline vibrations, it has a wide operating temperature span and options to suit an extensive range of applications.
The Sarasota FD950 Chemical Density Meter is designed for the high accuracy measurement of aggressive liquids and slurries. It provides continuous online density measurement, providing straight-through flow in a compact and lightweight design. Accurate to 0.1kg/m3, it has a wide operational density range of 0 to 2100kg/m3.
The Sarasota FD960 Fiscal/Custody Transfer Density Meter is designed for high accuracy measurement of high value process liquids and slurries. Using straight-through flow, the Sarasota FD960 provides continuous online density measurement. It has a wide operating temperature span, low pressure drop and a high flow rate capability and is suitable for use in hazardous areas.
|
|
Applications
: In-line density measurement of liquids or multiphase-mixtures
Special features:
Reliability
Robust construction with magnetic transmission of measured values.
Can be used in hazardous areas.
No by-pass required
Wide and clear scale
|
|
|
|
|
|
Portable Density Meter: DMA 35
The DMA 35 portable density meter measures the density and concentration of your sample and is characterized by the highest level of user friendliness. Its robust and lightweight design enables the use in numerous fields of application and its on-site operation in a wide range of work environments. This basic model enables the manual selection of measuring methods and sample IDs as well as wireless data exchange with a printer or PC. Therefore DMA 35 is an economic solution for general industrial and laboratory applications with constant or only occasionally changing measurement settings.
User friendliness
* Compact, lightweight design enabling one-hand measurement
* Easy operation, even when wearing protective gloves
* No-hassle measurement of hard-to-reach samples
* Large LC display with backlight for clear visibility of measuring results
* Measuring cell with inspection window and backlight
Robustness
* Rugged, leakproof housing design
* Designed for industrial and field applications
* Proven resistance of wetted parts against common samples
Wireless communication
* IrDA interface for data exchange with a PC and data export to a printer
Efficiency
* Storage of up to 100 sample IDs for easy sample identification
* Storage of up to 20 measuring methods
* Storage of up to 1024 measurement results including time stamp and sample ID
* Up to five programmable custom functions
* Two exchangeable 1.5 V AA batteries ensure long-term, reliable service
* Energy-saving mode for reduced power consumption provided
* Easy and fast replacement of the entire pump assembly
|
|
|
|
|
|
The Electronic Densimeter EW-300SG provides a highly accurate calculation of specific gravity of almost any object of any shape. The revolutionary compact design makes specific gravity measurement simple and accurate.
FEATURES
* For measuring solid density
* Density resolution: 0.01g/cm³
* It takes only 10 seconds to measure.
* The most suitable instrument to use for specific gravity inspection on the production line
APPLICATIONS
Rubber, Plastic, Metals, Glass, Ceramic, Food, Wood, Medical
SPECIFICATIONS
• General-purpose type with density resolution of 0.01g/cm³, weight 0.01~300g.
• Very simple measuring procedure allows anyone to use easily.
• Capable of measuring instantaneously (measurement time: about 10 seconds), this is the most suitable for the users, who have a number of samples to be measured, to use.
• Capable of measuring specific gravity of floating samples, such as urethane rubber, plastics, sponge, and wood, in the water.
• Result judgments with Comparator Mode is available.
• Easy connection to PC with standard equipped Interface (RS232C: 9 pins, male connector).
• Ethanol can be used as a liquid medium with improved Styrol Water Tank.
• Measuring the change rate of density. Indication: Weight in the air; Value of specific gravity ; Volume
OPTIONAL PARTS
• Printer AD-8121B: Dot impact type
• Airtight windshield: EW-300SG is not equipped with an airtight windshield, which is necessary, in case measurement may be difficult due to effect of wind.
• ISO-related documents: Traceability; Calibration Certificate; Report on of Inspection Results.
|
|
The SBS-3500 is our BEST portable specific gravity meter. It uses oscillating
U-tube technology while measuring the density of your sample supplying results within seconds. It is able to communicate wirelessly with a printer or PC via the integrated IrDA interface. Our SBS-3500 is additionally equipped with an RFID interface for quick sample identification and convenient change of the measurement method by reading RFID tags. This is a great solution for battery system, general industrial and laboratory applications.
|
|
Concentration, Water Content and Dry Substance measured by microwaves
Your Advantages:
High selective sensitivity to water
High accuracy and long-term stability
even for difficult products
Simple installation, insertion directly
on the existing pipelines, vessels, chutes etc.
Simple start-up, system supported sample taking,
automatic calibration and graphic display
Accurate and reliable measurement
due to two highly stable PLL-synthesizers
and multi-frequency technology
Durable sensor measuring cells with wear resistant
smooth walled PTFE lining
Contactless measuring cell without installed
measuring antenna
High operational safety and standards of quality
|
|
|
|
|
|
PROCESS LOW FLOW RATE LIQUID IN-LINE DENSITY METERS DC-30 SERIES
LEMIS process uses the proven vibrating element technology which is widely accepted as the most accurate of continuous density measurement. It is based on the frequency changing of the sensitive unit and resistance of the built-in temperature sensor in dependence of characteristics of measured liquid. The oscillation period of the sensitive unit mainly depends on density and temperature of measured liquid.
Continuous monitoring optimizes, controls and manages the processes. DC-30 series has a variety of applications, where low flow rate does not allow to install standard high flow systems. PC connection allows distance control for the most critical parameters in such processes as organic synthesis and chemical reactions in reactors.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
|
|
|
|
|
The compact, rugged Thermo Scientific SGD-O is the most reliable non-contacting density gauge for monitoring fluid density, including PPG, PPA and SGU, in the oilfield during fracturing and cementing. Capable of enduring high shock and vibration yet lightweight, this advanced device features rapid response and high accuracy to improve consistency, safety and overall performance. Engineered to withstand the extreme moisture and high humidity of oilfield environments, it rapidly indicates variations in slurry density and proppant concentration during fracturing and cementing operations. The SGD-O is comprised of three components: the source and detector work together to measure the fluid density while the remotely located electronic transmitter provides a clear digital display of the measurement. This advanced gauge measures through any pipe thickness, with the detector providing response in three to five seconds and accuracy of ±0.1 pounds per gallon. The transmitter can be mounted up to 100 feet away from the gauge to ensure worker safety. It can be powered by a readily available 12 or 24 volt power supply and features quick disconnect connectors for cable and transmitters. The SGD-O is also easy-to-install and use and has minimal maintenance requirements.
|
|
|
|
|
|
From refining and mining to pulp and paper, the DensityPRO-C is an economical and versatile nuclear density gauge designed for rugged industrial applications. It uses ionizing radiation to accurately and reliably measure the density of process material in both horizontal and vertical pipes that range in size from one inch (25.4 mm) to 40 inches (1020 mm). An extremely small nuclear source and a scintillation detector, are mounted externally to provide highly accurate, non-contacting density measurement. Depending on the application, the source size may vary slightly based on the pipe size, wall thickness, process material and the precision required.
The DensityPRO-C detector features surface-mounted electronics. Due to their compact size, the electronics endure high shock and vibration and have proven to withstand a minimum of 11 G’s at 40 Hz over an extended timeframe with no adverse effects, ensuring the dependability of the gauge over the long run. In addition, the multiprocessor-based electronics ensure uninterrupted output during data entry. All user data is doubly stored in non-volatile memory with no battery back-up required.
Because density measurement may be affected by temperature, the detector can be equipped with an optional temperature compensation board and a resistive temperature device (RTD). When connected to the detector, the RTD allows the temperature readings to be input to account for temperature fluctuations.
|
|
|
|
|
|
The Sarasota FD900 Density Meter is designed for high accuracy density and density related measurement of gases, liquefied gases and low viscosity fluids. Providing continuous on-line density measurement, with accuracy to 0.1% of reading, the FD900 can be installed via sample by-pass or direct in-line. It is ideal for analyzer applications.
The Sarasota ID900 Insertion Density Meter gives accurate, continuous density measurement of liquefied gases and low viscosity fluids in true process conditions with direct insertion into the pipeline or vessel by a choice of methods. With features such as a retractable option, ensuring no downtime on pressurized lines, the Sarasota ID900 is a smart choice for process quality and control.
The Sarasota PD900 Pocket By-Pass Density Meter is designed specifically for the high accuracy measurement of gases. It provides continuous on-line density measurement at process conditions by directly mounting the thermowell into the pipeline. Ease of servicing ensures no downtime on pressurized lines, and no on-site calibration is required.
|
|
|
|
|
|
PORTABLE LIQUID IN-TANK DENSITY METERS DM-250 SERIES
Portable Submersible Density meter DM-250.1 and DM-250.2 are best suited for liquid density and temperature measurements directly in the storage or process tanks (up to 30 meters depth). No labor extensive and errors critical sampling required. Instead, the sensor of DM-250.1 and DM-250.2 are submersed at any required level and record spot density and real temperature at that point directly in the liquid. The operation personal can get in minutes the average density in the tank and its density / temperature / level profile, for example, at every meter. DM-250.3 is best for situation when DM-250.1 and DM-250.2 could not be installed. Just take a sample that is over a hundred mililitres of sample and the equipment will give you the results in seconds! Hundreds of measurements can be stored locally and future transferred to a PC or printer via built-in Bluetooth connectivity.
Density determination directly in the tanks is faster, easier, more precise and cost effective comparing with conventional technique requiring sampling and use of glass hydrometers by qualified personal. That is why the DM-250 series portable density meters from LEMIS process have found wide application, first of all in oil industry upstream and downstream operations where control of quality (density) and quantity (mass) of petroleum products at movement and storage is very critical.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
PART #SBS-2002
DIGITAL SPECIFIC GRAVITY TESTER KIT
Battery testing has never been this easy. Simply insert the nozzle into the battery, depress the finder pump, and extract a few drops of sulfuric acid (H2S04) electrolyte. Touch one button and the processor does the rest. Within three seconds you have a temperature compensated accurate reading of specific gravity and temperature.
Field studies show time savings of at least 5 times (500%) using the SBS-2002 Digital Hydrometer over a standard glass hydrometer and thermometer.
ADDITIONAL PARTS:
SBS-2002 KIT SPARE PARTS KIT
SBS-2002 SAMPLING TUBE
SBS-2002 O-RING GASKET
SBS-2002 HOLSTER W/BELT
SBS-2002 CALIBRATION
SBS-2002 CALIBRATION CERTIFICATE
|
|
PART # SBS-2500
DIGITAL SPECIFIC GRAVITY TESTER
Battery testing has never been this easy. Simply insert the nozzle of the digital hydrometer into the battery, depress the finder pump, and extract a few drops of electrolyte. Touch one button and the processor does the rest. Within seconds you have an accurate reading of temperature compensated specific gravity and electrolyte temperature.
Field studies show time savings of at least 5 times (500%) using the SBS-2500 Digital Hydrometer over a standard glass hydrometer and thermometer.
This digital hydrometer will log up to 1,100 individual S.G. & temperature readings that can later be uploaded to a laptop or PC running the included software
ADDITONAL PARTS:
SBS-2500 O-RING
SBS-2500 SAMPLE PUMP
SBS-2500 PRINTER
SBS-2500 TUBE/WASH
SBS-2500 SPARE PARTS KIT
SBS-2500 CASE
SBS-2500 CD
SBS-2500 LIGHT
SBS-2500 LIGHT BATTERY
SBS-2500 COMM CABLE
SBS-2500 ADAPTER
|
|
|
|
see the results for the following category : 
