|
|
Female Hose Couplings, Page 203-204
Type M (suitable for self-assembly, reusable)
Type M-NR (non-reusable)
Reverse Side Special Types + Accessories:
Fittings and clamps for barrel pump hoses, spare seals, special washer NYD, box spanner EW 15/25, double head wrench
|
|
|
|
|
|
The U-PVC range is a system of products complete of: fittings for solvent welding, threaded connection and manual or automatic valves for use in the construction of process and service lines to convey industrial fluids at maximum operating temperatures of 60°C.
The entire range is produced using U-PVC resins compliant with the standards EN 1452 and ISO 4422 and in observance of the requirements of DIN 8063 and EN ISO 15493 for the use of plastic pipes in industrial processes.
Among the main properties and features of the U-PVC range the following can be noted:
Good chemical resistance: U-PVC resins guarantee excellent chemical resistance with regard to most acids and alkalis, aliphatic hydrocarbons and saline solutions. U-PVC resins are also totally compatible for handling food grade fluids, treated and untreated drinking water, as well as demineralised water according to current national and international standards.
Good thermal stability: Mostly in the intermediate temperature range between 20°C and 50°C, U-PVC finds its ideal application in industrial and water supplies, guaranteeing optimal performance in terms of mechanical resistance, good rigidity, low coefficients of thermal expansion and optimal safety factors in service.
Lifetime: U-PVC resins feature is an high value in the material strength (Minimum Required Strength MRS ≥ 25.0 Mpa at 20°C) and an extremely extended lifetime.
|
|
Mechanical Fittings
Fittings for Solvent Cementing
Fuseable Fittings
COOL-FIT
Double Containment
Multilayer Fittings
|
|
Fittings(Synapse)
Flare Type (Ferrule Type)
With flare type, a ferrule called a "Seal Joint" is attached for easy connection. The Seal Joint is a component molded in a flange shape. Simply insert the Seal Joint into the end of the tube for use.
Flange Type
A flange type is used for tubing made of plastic like PTFE, and has a simple structure.
Before use, the tube end should be enlarged like a trumpet and pressed into the bottom of a valve port.
Male Connectors & Male Elbows
PT Male Connector
PT Male Elbow
LPT Male Connector
LPT Male Elbow
|
|
General Description
Within the PI/PM range of plastic fittings we offer Straight Adaptors in a variety of sizes, both imperial and metric, and thread types. All Straight Adaptors offer a male thread. For fittings with female threads, refer to "Female Adaptors" and "Tap Adaptors".
Materials of Construction
This fitting is made of the following components:-
* The body is produced in acetal copolymer
* 'O'Rings are nitrile rubber
* The collet is produced in acetal copolymer with stainless steel teeth
|
|
|
Airflex Rotorseals allow passage of pressurized fluids from a stationary inlet to a rotating shaft end. Single, dual and triple passage rotorseals are available in a variety of sizes and designs to meet most flow requirements. The multiple passage units can be used for individual control of components mounted on the same shaft, component lubrication and circulating fluid systems.
|
|
Technical Description
Can be used in hydraulic systems where rotating connections are essential, for example on accessories with rotating movements. Depending on design, the body is made of brass (TDG) or steel (TKR) and the rotating axis of surface-purified/stainless steel.
Maximum rotation speed: 60 r.p.m.
Advantages
Rotating joints minimise the high wear to the hose, which occurs in hydraulic systems. Solid construction with two plain bearings (TDG) or ball/roller bearings (TKR). Suitable for combining with norm hydraulic components.
Working Temperature*
-20°C up to +100°C (NBR)
depending on the medium.
FKM on request.
|
|
TP 8000 series Rotating coupling
Multi circuit rotating coupling, fastening by flange (other on request).
Fluid : All fluids (specify when ordering).
Operating pressure : As per order.
Speed : To be defined according to operating conditions.
Number of circuits : On request.
Installation type : Flange.
Dimension : On request.
Seal type : Composite seal.
Materials : Hardened steel, chemical nickel stainless steel etc.
Temperature : Standard 80°C (others on request).
Rotation principle : Ball bearings
|
|
Description
Rotating union for swiveling or slow rotation speed, for low mechanical stress.
Fluid being conveyed
All fluids and vacuum (to be specified on request)
Operating conditions ( temperature, pressure and speed) being interdependant, the application limits indicated in this
figure can not be combined simultaneously
|
|
Description
Rotating union for swiveling or slow rotation speed, for high mechanical stress.
Fluid being conveyed
All fluids and vacuum
O’ring seal or composite seal according to fluid
|
|
|
Connection turning series TP 4000 Double Series conceived for the cooling of the rollers of continuous castings for the iron and steel industry. Connection designed for slow rotation, great resistance to the load of the flexible devices, mud-laden water, envisaged for dusty environment. Fluid to be conveyed: Water Pressure operating: 15 bar Speed: Lower than 15 turns/minutes passage Numbers: 1 Type of establishment: Right or 90° Dimension: According to Standard request for sealing: Ring impregnated graphite/stainless steel treaty Materials: Body out of bronze and central stainless steel tube treaty Temperature: Until 120°C at a peak Principle of rotation: Bearing with contact obliques out of stainless steel treated with nonjointed balls
|
|
Rotating union designed for high pressure and slow rotation speed.
Max. pressure (in Bar) From 450 Bar up to 600 Bar according to diameter
Materials
Tube and body in chromium steel, deep treated and coating with zinc
in a dichromate bath
|
|
STENFLEX swivel joints are used in applications involving liquid and gaseous media. The swivel joints can be used as flexible pipe connectors under the most demanding conditions and can withstand extreme temperature and pressure.
STENFLEX swivel joints are highly suitable for absorbing oscillations. Swivel motion can be handled as well as complete rotation at low speed.
|
|
MPI Fittings are designed to operate at pressures in the range of 5,000 to 15,000 psi.
|
|
High Flow female coupler, including steel dust cover. Connection: 3/8" NPT female thread. Fits on A 119
High Flow male coupler, including steel dust cover. Connection: 3/8" NPT female thread. Fits on: A 118, A 134 N, A 418
|
|
|
|
|
|
Let-lok Tube Fittings
The HAM-LET® GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications since its establishment in 1950.
For almost five decades, through tremendous efforts in research and development, HAM-LET® has gained an excellent reputation as a leading manufacturer of high pressure instrumentation products.
The LET-LOK® range of connectors has been developed to fill the rapidly increasing demand for tube fittings suitable for high pressure use in environments such as petrochemical, fluid, power, nuclear, electronic, as well as other major industries.
LET-LOK® tube fittings have been carefully manufactured and tested to withstand the demands of high performance tube fittings, such as high pressure, impulse, vibration, vacuum and temperature.
These tube fittings are manufactured to exacting tolerances using the most modern and advanced computerized automation. One of the main conditions required to producing these precision machined fittings is the maintenance of stringent quality control in conjunction with skilled craftsmen
|
|
|
Autoclave Engineers medium pressure and high pressure fittings use the coned-and-threaded connection. This metal to metal connection features orifice sizes to match the high flow characteristics of this series. Autoclave's fittings and tubing are used as fluid handling components for the chemical/petrochemical, research, and oil and gas industries and have different ranges capable of operating to 150,000 psi (10,000 bar) and range from 1/4" to 1 1/2" tube sizes.
|
|
High Pressure Fittings and Adapters up to 150,000 PSI
IVS offers a broad line of ultra high pressure fittings and adapters, including high pressure coupling, cross, bulkhead union, elbow, tee, cap, plug, hose fittings, etc., pressure range from 3000 psi to 150000 psi (20 Mpa - 1000 Mpa).
FEATURES & BENEFITS
Multiple types of plating and vibraseal available
Working pressure up to 60,000 PSI
Temperature ratings from -100 to 600°F
Coned and threaded connections
Safety weep holes standard on all pressure connections
Glands, collars and anti-vibration connections available
TYPICAL MATERIAL
304, 316 Stainless Steel
|
|
HAM-LET®/HTC® specializes in the design and manufacture of high-quality, specially manufactured valves and fittings for High Purity and Ultra-High Purity applications. HTC®'s expert engineers and technicians have worked together to develop a complete line that reflects the company's deep understanding of the critical requirements of the semiconductor, biotech, and pharmaceutical industries.
HAM-LET®/HTC® is a leader in the manufacture of fittings and valves for clean industries and has consistently spearheaded significant new developments in this field. For example, the company has set new standards in the production of Ultra Pure fittings by incorporating the use of 316L Vim/Var as the standard material for the manufacture of fittings. HTC® has also broken new ground in surface-finishing techniques by implementing improved electro-polishing processes
|
|
SPECIFICATIONS
End types include NPT, BSPP, BSPT Male & Female, Reducing
NPT, Reducing BSPP, Reducing BSPT Male & Female.
NPT, BSPT, LET-LOK® to BSPP
NPT, BSPT, Face Seal HTC Connector to BSPP
Face Seal HTC® Connector GSW Glands
The filtering element is sintered to the body of the fitting,
enabling it to work with differential pressure of up to 6000 psi
(408 bar) in St.St. fittings 1/8'' male NPT.
5 types of filtering elements, suitable for light gases up to oil
in viscosity of 1000 SUS and more
The body of the fitting is made of St.St. 316 or Brass.
Max. working temperature in St.St. 1022°F (550°C), Brass
430°F (220°C)
Suitable for steam
|
|
|
|
|
|
STAINLESS STEEL HIGH PRESSURE 37°
TUBE FITTINGS 1/8'' TO 2''
TUBE HANDLING
Scratches on the tube might cause leaks. It is, therefore, important
to handle the tube carefully to reduce the risk of leaks.
1. Tubes must not be dragged on the floor.
2. Tubes must not be dragged out of a tubing rack, especially in
cases of large OD tubes.
TUBE CUTTING
Two different methods can be used to cut tubes:
1. Tube cutter
2. Hacksaw
Tube cutter
To attain a leakfree connection, the tubing must be cut squarely.
A good quality tube cutter with the appropriate blade for the tubing
material is recommended.
Do not try to reduce the time of cutting by taking deep cuts with
each turn of the cutter.
The end of the tube must be deburred to avoid damage to the
fitting and to ensure that the tube reaches the bottom of the fitting.
Hacksaw cutting
In order to cut the tube with a hacksaw and to attain square ends,
the tube must be cut with guide blocks. This method of cutting
requires deburring of the tube ends.
WARNING
Do not hold the tube in a vise in the place where it will be inserted
into the fitting. The vise will leave a mark on the tube that may
cause leaks and might cause ovality
|
|
The Principle
ONE-LOK is designed to give you leak-proof, secure connections that can withstand high pressure, vibration and vacuum applications. To this end, ONE-LOK tube fittings are made up of three parts that are precision engineered and machined: body, ferrule and nut.
Applications
Ham-Let's ONE-LOK tube fitting is designed for use in control systems, process and instrumentation devices and in industrial equipment used in various industries such as:
Pulp & paper mills
Petroleum process plants
Chemical process plants
Chromatography
Power generation plants
ONE-LOK offers you a simple, high quality tube fitting with excellent performance and reliability
|
|
The HAM-LET Group Ltd. is pleased to introduce our line of Precision Instrument Pipe Fittings.
The Pipeline range of connectors is manufactured for typical applications in chemical and petrochemical processing plants, as well as oil, gas and power generation industries. This fully illustrated catalog contains detailed engineering information, dimensional data and part numbering system
|
|
DESCRIPTION
The Vent Protector Fitting (VeP) is used to protect tubes that
are exposed to atmospheric pressure, instruments that are open
to atmospheric pressure and every tube outlet that is open to
atmospheric pressure.
|
|
Couplers and Multi-couplers
The GU line is made up of Couplings and Inserts. They allow for a quick, safe connection and disconnection of two parts within a pneumatic installation without cutting off the air supply.
They are indeed provided with a poppet valve system that stops the air flow during the disconnection phase.
Couplings are mainly used to rapidly connect the air tubes with pneumatic tools and for this purpose a female coupling with a poppet is assembled on the pressurised part and the male insert on the tools to be disconnected.
|
|
J0451 API Coupler
* Industry standard for over 30 years
* Maintenance friendly
* Lightweight design
* In-situ nose seal replacement
* Lowest leakage on disconnect in class
* Better load distribution
* Superior sealing technology, with three seal variants
* Bevelled lip for ease of operation
* Ergonomic design
* Wide range of spare kits available
|
|
The connections doubles ring dielectric Ham-Let are designed electrically to isolate the instrumentation from the electric currents, potentials and electrostatic loads.
1. Maximum pressure 5000 psi
2. Limit temperature: -40°c to 93°c
3. electrical resistance with 20°c -25°c 10X106Ω At 30V
|
|
|
|
