|
|
TODO-GAS® couplings are specifically designed for the safe transfer of LPG (typically Propane / Butane) in both liquid and vapour phases.
The materials of construction and component design are specified to recognise the unique properties of LPG and terminal handling characteristics.
Ultra low release on disconnection not only improves safety but also satisfies even the most stringent of environmental standards. Typical emission reduction is greater than 99% compared to existing thread based couplings.
Just like their TODO-MATIC® stable mates, TODO-GAS® couplings remove the human error element from LPG transfer operations by ensuring that the valves are closed before disconnection is possible. Both TODO-MATIC® and TODO-GAS® couplings offer the lowest fugitive emission volumes available in the world.
|
|
Threaded and welding fittings have been manufactured since TECVAL started its industrial activity. Fabricated in different materials and with an excellent finish quality they can work under high pressure service.
Made in several alloys.
|
|
| ... products without technical information |
| |
|
|
|
|
Anguil's HCl Scrubber Module scrubs and neutralizes hydrochloric acid that is created during the oxidation of halogenated or mixed organic vapor contaminants.
How the HCl Scrubber Module Works:
The outlet of a Chlorinated Oxidizer, is directed to the Anguil HCl Scrubber Module. A recirculation pump injects large volumes of water into a hastelloy quench section, inducing vapor flow through the scrubber. The water quenches the hot vapor and absorbs a portion of the HCl. The gases exit the eductor and enter a countercurrent absorption column. Recirculating solution is fed to the top of the absorption column through a nozzle. The remaining hydrochloric acid vapors are absorbed into the solution. The gases pass through a mist eliminator before exiting the column. Sodium hydroxide is added to control pH in the neutral range.
System Components:
Each Standard HCl Scrubber Module is fabricated from FRP and includes hastelloy quench, absorption column (consisting of a cylindrical tower filled with polypropylene spherical media), common liquid sump, recirculation pump, flanged inlet and outlet, hastelloy spray nozzle and liquid level indicator. The system components are assembled on an epoxy-painted steel base that is weather-resistant and corrosion-resistant.
The HCl Scrubber Module is designed as part of Anguil's broad line of technologically advanced, yet user-friendly, air pollution control products.
Anguil strives to provide innovative pollution control technology including process analysis, engineering, equipment manufacturing, installation and post-sale 24-hour service.
|
|
|
|
|
|
Bagasse fired boiler flue gas particulate emissions before dust collectors are ususally between about 8,000 and 12,000 mg/Nm3. This level of emission is unacceptable from an environmental point of view, and some form of dust collection is therefore essential.
Therefore, Fives Cail is exclusively licensed by Tongaat Hulett to propose a large range of gas scrubber.
The Tongaat-Hulett/Fives Cail Gas Scrubber is a rain tray type, vertical cylindrical unit, designed to remove solid particulate matter from boiler flue gases.
The internals consist of three major components that play distinct parts in the scrubbing process. These internals are as follows:
Inverted cone spray
Irrigated sieve plates
Vortex generator/Entrainment separator
Technology performance for the environment
Unique Performances
Particulate emission levels are typically less than 100mg/Nm3
10% of sulphur removed
Easy installation
Located output boiler
Easy adaptation in the workshop
Reduced maintenance
Minimum wear
No specific maintenance
No internal movings parts
|
|
Hydrodinamic wet filter IDRODUST COMPACTI® is a hydrodynamic machine for removal of dust, vapours and gases by means of micro-mixing the gas to be treated with water. Mixing is realized in a duct with a specially designed shape, where water is dragged for the depression created by the fan, where polluted air is centrifuged to enable dust trapping and/or absorption of gases. A high performance drop separator on the outlet avoids dragging of water. Water circulates without the aid of pumps or spraying nozzles, ensuring the reliability of the machine, whose parts are not subject to wear or clogging, reducing maintenance requirements.
APPLICATIONS
Idrodust Compact hydrodynamic wet filters can be used for processing involving sparks or wet dusts
|
|
FRIDURIT® flexible fume scrubbers
The FRIDURIT fume scrubber C20 has been specially designed for decentralised washing of harmful substances for precise extraction directly at source. He is equipped with an integrated fan and can be placed anywhere in the laboratory, e.g. on the worktop, the floor or where the installation of a built-in fume scrubbers is not possible due to shortage of space. Please refrain from installing the fume scrubber C20 inside fume hoods.
|
|
| ... products without technical information |
| |
|
|
|
|
The MX range is a compact and affordable steam boiler ideal for small to medium sized users of process steam.
Each boiler is individually tailored to your specific needs and manufactured from start to finish in our own factory, thereby ensuring quality control of the very highest standard. All fittings are mounted in the factory to make installation on site as quick and easy as possible.
The boiler can incorporate any make of burner to suit a wide range of gaseous or liquid fuels in single, dual or tri-fuel combinations.
The MX boiler has a thermal efficiency in excess of 89% (based on NCV) .
External surfaces are well insulated and finished in tough, Aluzinc cladding.
The front door is lined with the latest ceramic fibre technology offering significantly less heat loss than traditional refractory materials.
The MX range has larger heating surfaces and steam space than comparable boilers, meaning desirable low heat transfer rates, Low NOX emissions, easily achievable outputs, and quality dry steam throughout the firing range.
A huge range of accessories are available to further enhance the boiler; contact us for more details.
Manufactured to BS2790 Class 1 with outputs to 3MW (5000 kg/hr) and operating pressures to 17 bar(g)
|
|
Model VT
DIATHERMIC OIL GENERATOR,
IN "HORIZONTAL CYLINDRICAL" DESIGN ONE-TUBE VERSION, WITH ONE OR MORE PARALLEL CIRCUITS
NO CERTIFIED STOKER IS REQUIRED TO OPERATE THIS KIND OF GENERATOR
General Features
Screened combustion chamber
Low thermal loads
Reduced thermal inertia (the use of refractory material is limited whenever possible)
High safety performance
Fully automated functioning
Small overall dimensions
Easy servicing
Burner suitable for liquid or gas fuels
Two-level or modulating flame adjustment
|
|
| ... products without technical information |
| |
Vertical Filter Separator
The Plenty Vertical Filter Separator will remove 100% of all droplets 8-10 microns and larger and 99.5% of all droplets ½-8 microns in size.
It will also remove 100% of all solid particles, 3 microns and larger 99% of all particles ½-3 microns in size.
These operating efficiencies apply over the entire flow range from maximum design down to virtually zero flow.
The first stage of the filter separator consists of a number of glass fibre coalescer /filter elements through which the wet gas passes.
The small liquid drops carried in the gas stream are trapped within the glass fibres of the element and coalesce to form drops 100 to 200 times larger than the original size.
These drops pass through the element wall and are carried forward by the gas stream to the second stage vane type separator.
The second stage consists of a vane type impingement separator, which operates exactly as described for vane separator.
|
|
|
|
|
|
The Company ESK is building oil separators for refrigeration systems working with synthetical refrigerants like R22, R404a, R410a, and as well for many natural refrigerants like CO2, ammonia and hydrocarbons.
The ESK standard oil separators type OS effectively remove oil from the discharge gas in the strainer elements and return the oil through a high precision float valve to the crankcase or oil control system. The efficiency of oil recovery is dependent on the reduction of gas velocity in the separator itself. Providing the oil separator is correctly applied, this will be about 95 % to 98 %.
Beside conventional separators ESK is also offering high performance oil separators type BOS with a separation ratio of more than 99%. The BOS oil separators are equipped with coalescence elements made of glass fiber micro for the efficient separation of aerosol particles out of the discharge flow.
The use of ESK oil separators protects the compressor from defects cause by lack from lubrication and improves the heat transfer in the evaporator.
Oil separators should be installed whenever the following applications are considered:
• Evap. temp. below <-10 °C
• Blast freezers
• Capacity control
• Two stage plants
• Parallel systems
• Cascade plant
• Flooded systems
• Booster
|
|
The Parker oil separator removes oil from system refrigerant by means of a highly efficient coalescing filter. The filter is 98.5% efficient, filtering oil and particles down to 1/10 of a micron while leaving a trace amount of oil necessary for adequate system lubrication. The separator is ideal for recovery and reclaim operations.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
