|
|
Hydraulic hoses and accessories
ERIKS offers a complete ranges of hydraulic hoses, piping, couplings and accessories, used to build reliable and leak-free systems. The high level of knowledge that is converted into actual added value combined with a wide spectrum of suppliers makes ERIKS an ideal partner for both MRO and OEM customers.
Sales program
- hydraulic hoses; rubber and thermoplastic
- hose couplings
- quick-release couplings
- SAE flanges
- adaptors
- ball valves
- test connectors
- piping and pipe connectors
- hose and pipe brackets
|
|
MATERIAL: A234-WPB. A420-WPL6. A403-WP304L. A403-WP316. A403-WP316L.
Bending Radius®: R=3D, 4D, 5D………..
Bending Angle (θ): Degree15,20,45,60,90,135,180and also could manufacture according the angles given by the clients.
Straight Length (L): The length between two ends general from 300mm-1500mm, and also can product according to the clients’ requirement to product.
Outer Diameter(D) D≤1220mm
Wall Thickness(T) T≤120mm
End Bevel according to the bevel of welding pipe fittings construction
|
|
18.1 PU screwed cuff EL
for Master-PUR hoses, electrically conductive≤ 104 Ohm
18.2 Combiflex PU cuff
PU soft cuff for Master-PUR hoses
18.3 Combiflex PU cuff V
PU soft cuff for Master-PUR hoses on steel pipes acc. to DIN 2448/DIN 2458
18.3.1 Combiflex PU cuff V-EL
PU soft cuff for Master-PUR hoses, electrically conductive ≤ 104Ohm
|
|
|
|
|
|
Style 360 Repair Clamp
The Dresser® Style 360® repair clamp offers simplicity and ease of installation. Just wrap the clamp around the pipe, drop the bolts in place and tighten. It's that simple! Moreover, special one-inch long nuts allow the use of a standard deep socket wrench for complete tightening. In the popular 7.5 inch clamp width, there is also a third nut so
the middle nut can be used to pre-tighten the clamp.
Additionally, the smaller sized clamps feature a flexible band which means less holding force is required while tightening.
With the "360" clamp you can repair holes, breaks and splits in the pipeline. You can use it where pipe ends are separated, or where ends are deflected up to 4 degrees or 1/8 inch. Or you can join two pipes with a variation of 1/4 inch outside diameter.
Clamp features include a tapered gasket with a gridded design and the spanner is molded flush with the gasket to prevent "hang up." The "360" has a stainless band, lugs of rugged ductile iron and bolts of corrosion-resistant Dresserloy.
|
|
Ganymed-Swivel Joints
Applications: Articulated tongs, Loading stations (chemical, petrochemical industry, etc.) waste water purification techique (ventilation systems, rotating scraper bridges, sludge cleaning, etc.)
Connections: Threads, welding, flanges, cutting rings
Materials: Steel (42CrMo4), Stainless steel (1.4571)
Sealing: PTFE compound
Operating conditions: max. pressure 420 bar, max. temperature 225 °C, min. temperature -50 °C (*, 360° swivelling movements, rotating movements also suitable for low speed
|
|
Tubes and bends in pneumatic conveying lines are suffering more or less abrasion. Gericke elbow type GB resists abrasion and avoids product attrition.
It reduces considerabley degradation of conveyed material and avoids formation of angel hair through its patented deflection chamber.
The compact design reduces cost of pipe support and installation. It is automatically self-purging. Little pressure drop.Free trial units available.
|
|
Features:
- Compact and easy to install
- 100% self cleaning
- Fits all flange and pipe connections
- Available in cast iron, stainless and aluminum
- Reduces noise level
- Minimized pressure drop
Applications:
- For all high and low density dilute phase systems
- For plastic pellets, other granules and abrasive products
- For retrofitting existing systems
- For replacement of long and short radius elbows - and other pipe bends
|
|
|
Tompkins Forged Steel Adapters are made from carbon steel. These high-quality, one-piece adapters are finished in five color zinc dichromate and value priced. Perfect for applications with working pressures from 1,000 to (or up to) 10,000 psi and temperature ranges of -65 degrees F to +250 degrees F. Widest availability of jump-sizes and configurations in the industry. Meets or exceeds all SAE standards.
|
|
Properties:
Design ==> Adjustable direction screw-in socket
Construction ==> L shaped
Connection 1 ==> BSP cylindrical outer thread
Seal type ==> Thread socket with O-ring + spacer diaphragm ring Connection 2 + 3 ==> BSP cylindrical outer thread
Seal type ==> 60° inner cone
Material ==> Steel
Surface protection ==> electro galvanised, yellow chromized
|
|
sf 900
Weld Nipple
sf 900 OS
Weld Nipple
for Orbital Welding
sf 902
Reducing Weld Nipple
Cone Sealing Connections
The products sf 900, sf 900 m, sf 902, sf 929, sf 9P DKO, sf 9 DKO and sf 9 DKO 90 have an O Ring with 24° cone, suitable for fittings with Port form W to DIN 3861 and nut to DIN 3870 Form A2.
Orbital welding
sf 900 OS, sf 906 OS and sf 907 OS are designed for orbital welding. The weld end is square, free of burrs and without a bevel.
Materials
Weld nipples: AISI 316Ti
Seals: Perbunan (NBR) as standard,
Viton on request.
|
|
Advantages
All Parker hose barb fitting pipe threads are made to Dryseal standards.
Connectors, unions, nuts and extended elbows and tees are machined from CA 360 and CA 345 brass.
|
|
MPI Fittings are designed to operate at pressures in the range of 5,000 to 15,000 psi.
|
|
|
Our complete line of thermoplastic fittings and valves include push-to-connect TrueSeal™, compression style Fast & Tite®, Par-Barb hose barbs and Polypropylene Ball Valves. The fittings come in a variety of materials. All fittings and valves are FDA compliant and NSF 51 listed.
|
|
Thermoplastic Couplings offer push-to-connect operation, light weight design, and excellent chemical compatibility to meet a broad range of applications.
PF Series are non-spill couplings designed for use in closed system transfer and dispensing of chemicals with minimal environmental contamination. Available in body sizes 1/2" through 2".
PPM and PPL Series are general purpose, thermoplastic couplings with push button operation. Available in body sizes 1/8" and 1/4".
Spectrum Series couplings are available valved or un-valved and in an optional panel-mount configuration. Available in body sizes 1/8" and 3/8".
|
|
Bend and Fitting
Hot Induction Bend: ø 114mm - ø 1626mm (4"-64")
Radius of Curvature: Above 3D subject to O.D. and W.T. of the Bend
Degree: 0°- 180°
Quality Standards: SY/P5257-2004 and requested technical standards
Grades: GB/T9711 L190-L555 (API 5L A-X80)
PLEASE WRITE ALL ENQUIRIES IN ENGLISH ONLY! THANKS!
|
|
|
Fabricated to order from high-strength steel, Dresser Style 128W Flange Adapters afford the engineer a complete size range up to 24%u2033 diameter in steel, cast-iron and a-c pipe sizes. Flanges can be supplied to AWWA specification C-207 as well as other U.S. and international standards. The compression end of the adapter has a Dresser coupling type design utilizing a wedge gasket for an efficient, leak-proof seal. Insulating designs can also be furnished.
|
|
Mechanical Fittings
Fittings for Solvent Cementing
Fuseable Fittings
COOL-FIT
Double Containment
Multilayer Fittings
|
|
Style 194 Service Saddle
For use on PVC Pipe (IPS, OD)
Offers 360-degree support for taps off plastic mains
Designed with plastic pipe in mind, the Style 194 service saddle provides a low cost efficient means for supporting the pipe where service taps are made.
Check these advantages:
- Simply "wraps" around the pipe. One bolt to tighten.
- Full 360-degree support of the pipe, with designed-in safeguard against overtightening. Cannot deform the pipe.
- Recessed rubber compound gasket is confined, cannot blow-out, or cold-flow to weaken the seal.
- Boss furnished with either corporation or IPT threads, to suit your standards. 3/4" and 1" tap sizes available.
- Rugged malleable iron bodies are galvanized for long service life. Bolt is corrosion-resistant Dresserloy, cadmium plated.
|
|
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
| ... products without technical information |
| |
|
|
