|
|
|
|
|
|
The flexible cuffs QuickFlex are used without the processes for powders or granulated. They allow d%u2019isoler mechanically equipment the ones compared to the others. Ex: to isolate a vibrating sifter compared to his screw from proportioning.
QuickFlex consist of:
- 2 rigid pipes to weld onto the 2 parts of the process having to receive the cuff. These pipes are equipped with patented sections, adapted to the QuickFlex cuff.
- 1 flexible pipe whose two ends are equipped with bands d%u2019acier with spring moulded in l%u2019élastomère of the cuff. The installation of the cuff is done in a very simple way, by deforming the band d%u2019acier with spring in order to l%u2019insérer in the rigid pipes. The original shape of the section ensures then a perfect sealing of the cuff.
The assembly is done without tool in less than 20 seconds. One thus eliminates the risks to be wounded with screwdrivers during tightening from the traditional collars. Moreover the sleeve is adapted perfectly to the pipe.
No zone of retention n%u2019exist enters the flexible cuff and the pipe.
The system is tight with the emissions of dust. It resists an explosion of dust.
From its design, the phenomena of shearing of the cuff by the collar are eliminated.
Various d%u2019élastomères qualities are available:
Let us quote in example a food translucent polyurethane execution allowing to control l%u2019interior of the process visually.
For l%u2019industrie mineral, flexible cuffs in Kevlar are available.
These cuffs are available in a diameter ranging between 100 and 650 Misters.
|
|
|
Air and vacuum plumbing for all EOAT and automation projects. Also includes vacuum generators sized for single cups to entire tools.
|
|
|
|
|
|
The Grinnell grooved mechanical products range offers a complete & dependable way of executing the mechanical engineering installations in a structure.This applies not only to fire protection systems,but also to heating,air conditioning & ventilation installations.They are found wherever reliable operation is the key factor, even in power stations & other demanding construction projects.Our service also includes the assistance of specialists to offer guidance on the optimum use of these products.
The Grooved Method
Grinnell couplings and grooved-end fittings are universally used for joining grooved end pipe in a wide variety of piping systems.They are designed to provide a self-centering joint which accommodates the application of pressure, vacuum & other external forces, while limiting the burdensome need for special supports, expansion joints etc.
Flexible and Rigid Couplings
Flexible couplings provide designed in clearances between the housing key sections & the pipe grooves to permit both angular and longitudinal movement of the pipe.Rigid Couplings provide a rigid, locked-in pipe connection. Rigidity is attained simply; it is built-in.The Rigid System is based on a technologically advanced housing design that conforms to and grips the pipe.Couplings are available in painted & galvanized finish.
Range of fittings
Grinnell grooved fittings are available through 600mm/24" nominal pipe size in a variety of styles.These fittings are designed to provide minimum pressure drop & uniform strength. Depending on style and size, fittings are provided in various materials including malleable iron,ductile iron,stainless steel,forged steel or segmentally welded steel.
|
|
Parker's 5500 Self-Sealing Brass Couplings are used in fluid-transfer applications for easy maintenance on refrigeration and air-conditioning systems. Applications can also include marine refrigeration and air-conditioning systems, along with split refrigeration systems.
* Self-sealing upon disconnection maintains minimum inclusion of air and loss of fluid.
* Brass coupling provides corrosion resistance.
* Final metal-to-metal seal provides low leakage.
* Copper-sweat connections provide basic ends for brazing and eliminate the need for flux, simplifying the installation process.
* Panel mounting options are available for the unique needs of a unit.
Parker's FD57 Stub Kit Couplings are used in fluid-transfer applications for easy maintenance on factory pre-charged heat pump and split air conditioning systems.
* Easy installation of replacement units.
* Direct copper brazing capability.
* UL recognized
|
|
|
Tompkins Brass Adapters are made from CA360 Brass/Schedule 40. Rolled threads and one-piece design is perfect for all air/water-lower pressure applications (up to 2000psi) and Temperature ranges of -65 F to +250 F. Available in SAE 45 degree, JIC 37 degree, Hose Barb, compression, poly-flow, pipe, inverted flare, and poly-push with the broadest selection of jump sizes and configurations in the industry. Meets or exceeds all SAE standards.
|
|
The 2" coupling size probably covers the most diverse selection of applications in the Todo-Matic family. Available in a range of material and connection configurations, Todo-Matic 2" is designed for rapid and safe transfers. Offshore chemical dosing, pharmaceutical feedstock and aggressive chemical vapor transfer are just some of the challenging applications Todo-Matic couplings see on a daily basis.
|
|
Morris pipe couplings
- The original compression coupling
- Easy to install
- Substantial and reliable construction
- Competitive pricing
- Electrical conductivity guaranteed
- Available for practically every pipe diameter
|
|
Fittings: The range of fittings for steel pipes, for PE pipes and threaded fittings covers all the needs of Industrial and Plumbing Industries.
The big NEWS is "TOF Multipinza" range for multilayer pipes, allowing the use of EFFEBI fittings with all the types of tools (TH - U - H - F- B) for multilayer pipes.
|
|
Quick coupling system „Storz“ for use in potentially explosive atmospheres
- Fixed coupling with internal thread
- Fixed coupling with external thread
- Blank cap with chain
- Hose coupling
- Turning coupling with internal thread
- Turning coupling with external thread
- Fixed coupling with locking pawl
- Hose coupling with locking pawl
- Blank cap with cylinder lock
|
|
While others were thinking about large fittings, Clippard was thinking big about smaller fittings. Smaller valves and cylinders created the need for smaller fittings. Clippard was the first to develop ports utilizing the 10-32 thread. This thread has become an industry standard in the marketplace.
Clippard precision fittings will save you time, space, and money when designing versatile, productive, trouble free, pneumatic circuits. Our endless variety of fittings insure that you find just the right fit when plumbing pneumatic circuits or assemblies. These fittings are small in size but large in performance, allowing for streamlining of pneumatic assemblies and eliminating the need for larger, more expensive, cumbersome fittings.
|
|
Fittings: The range of fittings for steel pipes, for PE pipes and threaded fittings covers all the needs of Industrial and Plumbing Industries.
TOF PE - Brass fittings for Polietilene pipes
TOF/T GAS : Reached T for PE with derivation fi lettata female Gas
|
|
Features
• Available with choice of NPT/BSPT/BSP/SAE/ISO pipe threads, weld end and hose end fittings.
• Wide range of sizes, combinations and configurations.
• Manufactured in wide range of material like Stainless Steel, Steel, Brass, Aluminum, Titanium, Hastalloy, Monel and other special alloys.
• Straight items are made from fine quality extruded bars, all shaped items are made from close grain forgings.
• Size range from 1/8” to ¾”. Bigger sizes are available on request.
• All threads are capped to avoid damages
|
|
Dog bones should prevent a sliding or moving of the piping system in each direction. They serve furthermore for compensation of the reaction forces of compensators such as sliding sockets and push-fit fittings. The dog bone has to be dimensioned for all appearing forces:
Dog bones which have not been determined should be chosen in a way so as to make use of direction alterations in the course of the piping system for the absorption of the length alterations. As dog bones, edges of fittings sockets or special dog bone fittings are suitable. Swinging clips are not appropriate to be used as dog bones or the clamping of the pipes.
|
|
BULK precision pipe fittings are manufactured in a wide range of configurations
Size range from 1/8" to 1"
Construction from bar stock or forging materials
Threads meet requirements of ANSI B1.20.1, DIN 2999, BSP and ISO 7/1
Male and female threads are protected to ensure their integrity
MATERIALS
BULK precision pipe fittings are available as standard in 316 Stainless Steel.
We can also supply other materials including Brass, Monel, Hastelloy, Inconel, Titanium,...
PRESSURE RATING
Working pressures are calculated in accordance to ANSI code for pressure piping B 31.1 and showed in the table "general info".
Female pipe end ratings are lower than male pipe end ratings for a given size because the inner and outer diameters of female threads are larger than male pipe threads.
|
|
Style 38 Couplings
Proven by years of service on all kinds of pipe, Dresser Style 38 couplings provide flexible, leakproof connections that last the life of the pipe. No costly threading, beveling, exact pipe fitting or alignment is required. The resilient Dresser gaskets absorb vibration and pipe movement and permit curves to be laid with straight pipe lengths. Installation is safe and sure. There's no hazard to workmen or delays due to weather. Dresser Style 38
couplings are available from 1/2" ID to over 400" OD.
NOTE: Commonly used sizes are listed in the tables, but couplings can be
furnished for practically any size or special condition.
|
|
Properties:
Design ==> Screw-in fitting
Supplementary design information ==> French series
Construction ==> T shaped
Connection 1 ==> BSPT conical outer thread
Seal type==> thread seal
Connection 2 ==> metric cylindrical outer thread
Seal type ==> 24° inner cone
Connection 3 ==> metric cylindrical outer thread
Seal type ==> 24° inner cone
Delivery form ==> Socket with union nut and cutting ring
Material ==> Steel
Surface protection ==> electro galvanised, yellow chromized
|
|
|
Safety Lock TYPE: Automatic safety coupler designed to prevent accidental disconnects from the plug. The plug must be pushed further into the coupler body while the sleeve is pulled back in order to disconnect. Typical uses include weld and cut operations, diving, lift systems, air breathing equipment and any application where unintentional disconnecting would create a safety issue.
|
|
Pipe Adapters
Pipe Caps and Plugs
Pipe Couplings
Pipe Crosses
Pipe Elbows
Pipe Nipples
Pipe Reducers
Pipe Tees
|
|
Female Hose Couplings, Page 203-204
Type M (suitable for self-assembly, reusable)
Type M-NR (non-reusable)
Reverse Side Special Types + Accessories:
Fittings and clamps for barrel pump hoses, spare seals, special washer NYD, box spanner EW 15/25, double head wrench
|
|
|
Stainless steel 3000 lbs welding fittings and threaded fittings. Unions, elbows, tees, reducers, nipples, taps.
|
|
|
Tompkins Steel Adapters (Forged and Straight) are made from carbon steel. These high-quality, one-piece adapters are finished in five color zinc dichromate and value priced. Perfect for applications with working pressures up to 10,000 psi and temperature ranges of -65 degrees F to +250 degrees F. Widest availability of jump-sizes and configurations in the industry. Meets or exceeds all SAE standards.
|
|
Style 162 Transition Couplings...
For joining pipe of different diameters
The Dresser Style 162 Transition Coupling permits you to connect two different kinds of pipe or sizes of pipe. You simply select the correct coupling for the pipe diameters being joined. The drawings at right illustrate how gaskets of different cross-sections adjust the coupling to your requirement. Further adjustment is accomplished with reducing middle-ring couplings.
|
|
Hydraulic hoses and accessories
ERIKS offers a complete ranges of hydraulic hoses, piping, couplings and accessories, used to build reliable and leak-free systems. The high level of knowledge that is converted into actual added value combined with a wide spectrum of suppliers makes ERIKS an ideal partner for both MRO and OEM customers.
Sales program
- hydraulic hoses; rubber and thermoplastic
- hose couplings
- quick-release couplings
- SAE flanges
- adaptors
- ball valves
- test connectors
- piping and pipe connectors
- hose and pipe brackets
|
|
MATERIAL: A234-WPB. A420-WPL6. A403-WP304L. A403-WP316. A403-WP316L.
Bending Radius®: R=3D, 4D, 5D………..
Bending Angle (θ): Degree15,20,45,60,90,135,180and also could manufacture according the angles given by the clients.
Straight Length (L): The length between two ends general from 300mm-1500mm, and also can product according to the clients’ requirement to product.
Outer Diameter(D) D≤1220mm
Wall Thickness(T) T≤120mm
End Bevel according to the bevel of welding pipe fittings construction
|
|
18.1 PU screwed cuff EL
for Master-PUR hoses, electrically conductive≤ 104 Ohm
18.2 Combiflex PU cuff
PU soft cuff for Master-PUR hoses
18.3 Combiflex PU cuff V
PU soft cuff for Master-PUR hoses on steel pipes acc. to DIN 2448/DIN 2458
18.3.1 Combiflex PU cuff V-EL
PU soft cuff for Master-PUR hoses, electrically conductive ≤ 104Ohm
|
|
Ganymed-Swivel Joints
Applications: Articulated tongs, Loading stations (chemical, petrochemical industry, etc.) waste water purification techique (ventilation systems, rotating scraper bridges, sludge cleaning, etc.)
Connections: Threads, welding, flanges, cutting rings
Materials: Steel (42CrMo4), Stainless steel (1.4571)
Sealing: PTFE compound
Operating conditions: max. pressure 420 bar, max. temperature 225 °C, min. temperature -50 °C (*, 360° swivelling movements, rotating movements also suitable for low speed
|
|
|
|
|
|
Style 360 Repair Clamp
The Dresser® Style 360® repair clamp offers simplicity and ease of installation. Just wrap the clamp around the pipe, drop the bolts in place and tighten. It's that simple! Moreover, special one-inch long nuts allow the use of a standard deep socket wrench for complete tightening. In the popular 7.5 inch clamp width, there is also a third nut so
the middle nut can be used to pre-tighten the clamp.
Additionally, the smaller sized clamps feature a flexible band which means less holding force is required while tightening.
With the "360" clamp you can repair holes, breaks and splits in the pipeline. You can use it where pipe ends are separated, or where ends are deflected up to 4 degrees or 1/8 inch. Or you can join two pipes with a variation of 1/4 inch outside diameter.
Clamp features include a tapered gasket with a gridded design and the spanner is molded flush with the gasket to prevent "hang up." The "360" has a stainless band, lugs of rugged ductile iron and bolts of corrosion-resistant Dresserloy.
|
|
see the results for the following category : Hose clamps |
|
|