|
|
Style 38 Couplings
Proven by years of service on all kinds of pipe, Dresser Style 38 couplings provide flexible, leakproof connections that last the life of the pipe. No costly threading, beveling, exact pipe fitting or alignment is required. The resilient Dresser gaskets absorb vibration and pipe movement and permit curves to be laid with straight pipe lengths. Installation is safe and sure. There's no hazard to workmen or delays due to weather. Dresser Style 38
couplings are available from 1/2" ID to over 400" OD.
NOTE: Commonly used sizes are listed in the tables, but couplings can be
furnished for practically any size or special condition.
|
|
Style 162 Transition Couplings...
For joining pipe of different diameters
The Dresser Style 162 Transition Coupling permits you to connect two different kinds of pipe or sizes of pipe. You simply select the correct coupling for the pipe diameters being joined. The drawings at right illustrate how gaskets of different cross-sections adjust the coupling to your requirement. Further adjustment is accomplished with reducing middle-ring couplings.
|
|
The flexible cuffs QuickFlex are used without the processes for powders or granulated. They allow d%u2019isoler mechanically equipment the ones compared to the others. Ex: to isolate a vibrating sifter compared to his screw from proportioning.
QuickFlex consist of:
- 2 rigid pipes to weld onto the 2 parts of the process having to receive the cuff. These pipes are equipped with patented sections, adapted to the QuickFlex cuff.
- 1 flexible pipe whose two ends are equipped with bands d%u2019acier with spring moulded in l%u2019élastomère of the cuff. The installation of the cuff is done in a very simple way, by deforming the band d%u2019acier with spring in order to l%u2019insérer in the rigid pipes. The original shape of the section ensures then a perfect sealing of the cuff.
The assembly is done without tool in less than 20 seconds. One thus eliminates the risks to be wounded with screwdrivers during tightening from the traditional collars. Moreover the sleeve is adapted perfectly to the pipe.
No zone of retention n%u2019exist enters the flexible cuff and the pipe.
The system is tight with the emissions of dust. It resists an explosion of dust.
From its design, the phenomena of shearing of the cuff by the collar are eliminated.
Various d%u2019élastomères qualities are available:
Let us quote in example a food translucent polyurethane execution allowing to control l%u2019interior of the process visually.
For l%u2019industrie mineral, flexible cuffs in Kevlar are available.
These cuffs are available in a diameter ranging between 100 and 650 Misters.
|
|
Morris pipe couplings
- The original compression coupling
- Easy to install
- Substantial and reliable construction
- Competitive pricing
- Electrical conductivity guaranteed
- Available for practically every pipe diameter
|
|
Fittings: The range of fittings for steel pipes, for PE pipes and threaded fittings covers all the needs of Industrial and Plumbing Industries.
The big NEWS is "TOF Multipinza" range for multilayer pipes, allowing the use of EFFEBI fittings with all the types of tools (TH - U - H - F- B) for multilayer pipes.
|
|
While others were thinking about large fittings, Clippard was thinking big about smaller fittings. Smaller valves and cylinders created the need for smaller fittings. Clippard was the first to develop ports utilizing the 10-32 thread. This thread has become an industry standard in the marketplace.
Clippard precision fittings will save you time, space, and money when designing versatile, productive, trouble free, pneumatic circuits. Our endless variety of fittings insure that you find just the right fit when plumbing pneumatic circuits or assemblies. These fittings are small in size but large in performance, allowing for streamlining of pneumatic assemblies and eliminating the need for larger, more expensive, cumbersome fittings.
|
|
Fittings: The range of fittings for steel pipes, for PE pipes and threaded fittings covers all the needs of Industrial and Plumbing Industries.
TOF PE - Brass fittings for Polietilene pipes
TOF/T GAS : Reached T for PE with derivation fi lettata female Gas
|
|
|
Stainless steel 3000 lbs welding fittings and threaded fittings. Unions, elbows, tees, reducers, nipples, taps.
|
|
|
Designed to handle operating pressures in the range of 6,000 - 15,000psi (414-1034 bar), MPI Tube fittings have been engineered to provide secure leak free connections at medium pressures. Utilising a compression style make-up, MPI negates for expensive coning and threading techniques common to higher pressure fittings.
|
|
Parker Instrumentation's radical new design of tube connector that can deliver huge cost savings...
Assembled by means of a simple push-fit operation, the new connectors provide permanent connections for fluid systems operating at up to 20,000 PSI / 1,379 bar. For permanent connections, and these elevated pressures, system builders would typically use either welded or 'cone and thread' style fittings, which are time consuming and expensive to install. Compared with these products, Parker Instrumentation estimates that its new Phastite connectors could reduce installation costs by a factor of 90% or more.
The connectors are supplied as one-piece components. To make a joint, all that's required is to insert the tube, and then push the collar along the connector body until it reaches a dead stop. This operation is performed by a simple handheld hydraulic tool and takes a few seconds.
Phastite is much faster to assemble than welded and cone and thread fittings and deskills the process, removing a major element of industrial system building cost.
The Phastite range includes straight union, union elbow, 'tee' and union cross connector shapes in imperial and metric sizes from 1/4 to 1/2 inch or 6 to 12 mm.
|
|
Dry Break Couplings
Todo-Matic Dry Break couplings offer industry leading valve technology for the safe transfer of hazardous chemicals. Todo-Matic couplings are operator friendly and can be engaged with a simple rotation without external locks, levers, buttons or cam ears. Coupling design allows for on-site replacement of seals. They are equipped with an integral swivel to prevent hose fatigue and facilitate coupling orientation. Products are available in aluminum, brass, stainless steel and hasteloy, in diameters from 3/4" to 6".
|
|
Style 360 Repair Clamp
The Dresser® Style 360® repair clamp offers simplicity and ease of installation. Just wrap the clamp around the pipe, drop the bolts in place and tighten. It's that simple! Moreover, special one-inch long nuts allow the use of a standard deep socket wrench for complete tightening. In the popular 7.5 inch clamp width, there is also a third nut so
the middle nut can be used to pre-tighten the clamp.
Additionally, the smaller sized clamps feature a flexible band which means less holding force is required while tightening.
With the "360" clamp you can repair holes, breaks and splits in the pipeline. You can use it where pipe ends are separated, or where ends are deflected up to 4 degrees or 1/8 inch. Or you can join two pipes with a variation of 1/4 inch outside diameter.
Clamp features include a tapered gasket with a gridded design and the spanner is molded flush with the gasket to prevent "hang up." The "360" has a stainless band, lugs of rugged ductile iron and bolts of corrosion-resistant Dresserloy.
|
|
Ganymed-Swivel Joints
Applications: Articulated tongs, Loading stations (chemical, petrochemical industry, etc.) waste water purification techique (ventilation systems, rotating scraper bridges, sludge cleaning, etc.)
Connections: Threads, welding, flanges, cutting rings
Materials: Steel (42CrMo4), Stainless steel (1.4571)
Sealing: PTFE compound
Operating conditions: max. pressure 420 bar, max. temperature 225 °C, min. temperature -50 °C (*, 360° swivelling movements, rotating movements also suitable for low speed
|
|
The core of the Larox pinch valve is the elastic sleeve, which is the only part in contact with the medium. The full bore sleeve integrates the valve to the pipeline. This full bore design eliminates turbulence and minimizes pressure losses. Technologically advanced Larox sleeves guarantee high wear and corrosion resistance, a trouble free operation, and extended lifetime. Our sleeves are 100% tight. Larox sleeves are handmade layer by layer in a quality process covered by ISO 9001:2000. The standard sleeve design consists of three sets of layers: the inner layer, the reinforcement layer and the outer layer. The inner layer, which is the only part in contact with the medium, is resistant to wear and chemicals.
The reinforcement layer gives the sleeve its pressure retaining capability. The operating pressure of the sleeve determines the reinforcement fabric to be used in this layer.
The outer layer protects the sleeve from the external process environment.
All standard Larox sleeves are equipped with opening tags to ensure full valve opening in all conditions. Pinch valves are often applied in aggressive, abrasive and corrosive media types, or in high-pressure applications. To cover a wider range of applications, our R&D has developed several sleeve materials and constructions to meet these industry specific needs. The high-grade Larox sleeve materials range from wear resistant styrene butadiene to numerous other elastomers and rubber compounds. These materials are highly resistant to abrasive and corrosive slurries, powders and granular substances. By introducing a HNBR, hydrogenated nitrile sleeve material, Larox sleeves can now handle temperatures up to 160°C.
|
|
The Variacor® system, internationally patented, makes all rigid hosing flexible and multi-directional, whatever may be the pressure.
-Increases pliability of fire hose, less effort due to hose rigidity,
-Makes easier using fire hose in hard to access area,
-Reduces step backwards when handling fire hose.
|
|
DSTI provides custom rotary joints for a number of offshore applications. available fetures include:
316 stainless steel construction, sealed bearing covers, 20,000 psi presssure capability, multiple fluid/air passages & integrated electrical slip rings. Please contact DSTI to learn more about past projects and dicsuss the details of your application.
|
|
Applications
Flange for electro-technical application
Properties
- screws, nuts and drilling pattern included
- high tensile strength and tear resistant
- easily and quickly fitted
- re-usable (threaded)
|
|
Cutting Ring Fittings acc EN ISO 84 34-1
- made of stainless steel AISI 316ti
- LL, L and S series
- from 4 to 42 mm
- nominal pressure up to 630 bar
- with double sided pipe connection
- with Viton seal or metal sealing
- ans other variations according to customer requirements
|
|
Tubes and bends in pneumatic conveying lines are suffering more or less abrasion. Gericke elbow type GB resists abrasion and avoids product attrition.
It reduces considerabley degradation of conveyed material and avoids formation of angel hair through its patented deflection chamber.
The compact design reduces cost of pipe support and installation. It is automatically self-purging. Little pressure drop.Free trial units available.
|
|
Sleeves:
PU-Schraubmuffe EL
Combiflex PU sleeve
Combiflex PU sleeve V
Flanges:
Combiflex PU fixed flange
Combiflex PU lot flange
Combiflex PU cone flange
Welding cone flange
Metal connecting piece with cone flange
High-speed clamping clip for cone flanges
Threaded end:
Combiflex PU threaded end
Hose clamps
High-speed clamping clips
Union
PU-lined pipes and tube bends
Hose reductions
|
|
* Barco Self-Aligning Swivel Joints Standard Series
• steam
• hot oil
• water
• bronze or cast iron
Rated to 325 psi(23 kg/cm2)
3/8" to 1-1/2" sizes
Series 600
w/Injectable Graphite Sealant
Hot Oil Applications
Up to 200 psi and 650°F
High Pressure Steam
Up to 700 psi and 503°F
1 1/4" to 1 1/2" sizes
* Series 600 Self-Aligning Swivel Joints BARCO's 600 Series swivel joints
allow servicing without disassembly.
A special port allows injection of graphite sealant without disturbing the assembly.
These joints are recommended for hot oil and high pressure steam applications.
see our product catalog self-aligning swivels page for more details.
|
|
|
TenarisHydril offers the best in premium connection design and technology worldwide. With a comprehensive range of high performance products backed by an extensive global service network, we are developing solutions to meet the needs of ever more demanding drilling environments.
|
|
sf 900
Weld Nipple
sf 900 OS
Weld Nipple
for Orbital Welding
sf 902
Reducing Weld Nipple
Cone Sealing Connections
The products sf 900, sf 900 m, sf 902, sf 929, sf 9P DKO, sf 9 DKO and sf 9 DKO 90 have an O Ring with 24° cone, suitable for fittings with Port form W to DIN 3861 and nut to DIN 3870 Form A2.
Orbital welding
sf 900 OS, sf 906 OS and sf 907 OS are designed for orbital welding. The weld end is square, free of burrs and without a bevel.
Materials
Weld nipples: AISI 316Ti
Seals: Perbunan (NBR) as standard,
Viton on request.
|
|
Mechanical Fittings
Fittings for Solvent Cementing
Fuseable Fittings
COOL-FIT
Double Containment
Multilayer Fittings
|
|
Style 194 Service Saddle
For use on PVC Pipe (IPS, OD)
Offers 360-degree support for taps off plastic mains
Designed with plastic pipe in mind, the Style 194 service saddle provides a low cost efficient means for supporting the pipe where service taps are made.
Check these advantages:
- Simply "wraps" around the pipe. One bolt to tighten.
- Full 360-degree support of the pipe, with designed-in safeguard against overtightening. Cannot deform the pipe.
- Recessed rubber compound gasket is confined, cannot blow-out, or cold-flow to weaken the seal.
- Boss furnished with either corporation or IPT threads, to suit your standards. 3/4" and 1" tap sizes available.
- Rugged malleable iron bodies are galvanized for long service life. Bolt is corrosion-resistant Dresserloy, cadmium plated.
|
|
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
* EUCARIGID-RAHT :
Pipes and fittings made of C.PVC for hot domestic water until 95°C
with BENOR quality label (following NBN EN 1566-1).
* EUCARIGID-RA :
Pipes and fittings made of PVC for cold domestic water (until 65°) following manufacturers standard or with BENOR quality label (NBN EN 1329).
|
|
|
|
