|
|
|
|
|
|
The flexible cuffs QuickFlex are used without the processes for powders or granulated. They allow d%u2019isoler mechanically equipment the ones compared to the others. Ex: to isolate a vibrating sifter compared to his screw from proportioning.
QuickFlex consist of:
- 2 rigid pipes to weld onto the 2 parts of the process having to receive the cuff. These pipes are equipped with patented sections, adapted to the QuickFlex cuff.
- 1 flexible pipe whose two ends are equipped with bands d%u2019acier with spring moulded in l%u2019élastomère of the cuff. The installation of the cuff is done in a very simple way, by deforming the band d%u2019acier with spring in order to l%u2019insérer in the rigid pipes. The original shape of the section ensures then a perfect sealing of the cuff.
The assembly is done without tool in less than 20 seconds. One thus eliminates the risks to be wounded with screwdrivers during tightening from the traditional collars. Moreover the sleeve is adapted perfectly to the pipe.
No zone of retention n%u2019exist enters the flexible cuff and the pipe.
The system is tight with the emissions of dust. It resists an explosion of dust.
From its design, the phenomena of shearing of the cuff by the collar are eliminated.
Various d%u2019élastomères qualities are available:
Let us quote in example a food translucent polyurethane execution allowing to control l%u2019interior of the process visually.
For l%u2019industrie mineral, flexible cuffs in Kevlar are available.
These cuffs are available in a diameter ranging between 100 and 650 Misters.
|
|
The 2" coupling size probably covers the most diverse selection of applications in the Todo-Matic family. Available in a range of material and connection configurations, Todo-Matic 2" is designed for rapid and safe transfers. Offshore chemical dosing, pharmaceutical feedstock and aggressive chemical vapor transfer are just some of the challenging applications Todo-Matic couplings see on a daily basis.
|
|
Ultra Thin-wall Flexible Metal Roll is extremely thin at only 0.03 mm. It is soft and flexible, yet rigid with high tensile strength of stainless steel. This roll shows the best performance when used in a fuser unit of a printer or copier, realizing wall contact and shorter standing-up time.
Features
Ć Thickness: 30 micron minimum
Ć Seamless
Ć Create wall contact rather than line contact, resulting in effective nipping
Ć Excellent thermal conductivity resulting in shorter stand-up time and conservation of electricity
Ć High tensile strength of stainless steel
Ć Smooth surface
Ć High precision in thickness, roundness, outer and inner diameter
Ć Light
Ć Plating, plastic coating, and rubber coating on surface
Ć Choice of magnetism and nonmagnetism
Application
Ć Fusing unit in a printer or copier
Ć Other parts in a printer or copier
Ć Motor cover, Rotor cover, Stator cover
Ć Plastic Sheet forming, Film forming
Ć Lamination
Ć Seamless Bellows
|
|
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
| ... products without technical information |
| |
RPS markers are heat shrinkable marking sleeves for wire and
cable identification. When RPS is printed with Tyco Electronics
recommended printers and ink ribbons, the marks remain legible,
without any post printing process, even when exposed to
abrasion, aggressive cleaning solvents, and industrial fluids.
RPS markers are designed to meet the wire identification needs of
commercial and industrial customers.
Features and benefits
Permanent identification sleeves
Computer printable
Excellent print performance
Configured for ease of kitting
Good chemical and solvent resistance
3:1 shrink ratio
CSA Certified, UL Recognized
|
|
TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements.
Made from durable, flame retardant, radiation crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves can be used in a wide variety of applications.
All TMS-SCE meet the performance requirements of SAE-ASM-DTL-23053/5 class 1.TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL-23053/5 classes 1 and 3. The marks are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAEAS81531 4.6.2 and MIL-STD-202 both before and after shrinking.
|
|
PHZ
- Flexible zero halogen thin wall polyolefin heat shrink tubing for marking on site.
- Excellent properties of fire safety characteristics.
- Low smoke generation and evolution of acid gases.
- Flexible and easy mounted on cables and wires.
- 2:1 shrink ratio.
- Reduced overall assembly and marking costs on site when using Partex marking machines and software.
|
|
| ... products without technical information |
| |
Properties
2-diagonally square and round braids for static applications
Diameter
round, square, rectangular
Dimensions
5 - 60 mm square
up to 110 mm on request
|
|
|
|
|
|
Hollow braidings and accessories
Braidings in different materials; plastic or metal
Applications
- for cable bunching
- as mechanical protection against abrasion
- for electrical installations and highly flexible applications
Properties
- good protection against abrasion
- easy retraction of cables
- variable inner diameter
- partically good screening factor (EMC)
- highly flexible
up to IP 40 to EN/ IEC 60529
Temperature Range
from -55 °C up to +250 °C
Construction and material
- Braiding in different materials: tinned copper wire, galvanized steel wire or plastic (PA 6, polyester)
Accessories
NORRES offers a wide and harmonious range of accessories geared to the needs of the marketplace for its many cable protection conduits and systems, as counter nuts in plastic or metal, plastic enlargements, blind plugs or screwed adapter. Norres can supply not only all standard accessories but also customised solutions. In the unlikely event that you are seeking a product we do not already stock, please do not hesitate to contact us. Our R&D and Engineering departments strive to reconcile users’ expresses needs with the latest technical advances to evolve the optimal solution for every application.
|
|
3M™ Nextel™ Braided Ceramic Sleeving is available in diameters to meet the needs of most applications. It is readily cut to length.
Frequently used in electrical thermocouple insulation, our ceramic sleeving offers the same reliability and quality you'll find throughout our entire line of ceramic fabrics. Whether covering hoses and cables in aircraft, or insulating heater wires and protecting fire zone cables, there's a sleeving diameter to meet your needs.
|
|
VERSAFLEX
Versaflex sleeving is suited for the mechanical protection of wire harnesses, hoses, and all other applications where exceptional flexibilty combined with superior abrasion/vut resistance is required.
FEATURES:
- Flame retardant version available (VERSAFLEX-FR)
- Flexible
- Lightweight
- Fungus proof
- Not affected by most chemical and solvents, non-hygroscopic
- Wide range of sizes
Agency Recognition
- RoHS
- UL (VERSAFLEX-FR)
|
|
| ... products without technical information |
| |
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
STEREO-HEAT® Impedance Heat Tracing is a direct current electric traced system across the ends of a steel or alloy pipeline section that provides even heat distribution on short to medium runs of preinsulated pipe.
STEREO-HEAT® Impedance Heat Tracing is based on the application of AC voltage across the ends of an insulated pipeline section on short and medium runs of pipe causing a current flow in the pipe walls that generates heat. This is an engineered custom designed system within ANSI/IEEE 844, NEC 426,427 and your specification requirements. This system can be retrofitted onto an existing pipe system or as part of a preinsulated PERMA-PIPE® system. Applications such as liquid food products, oil, asphalt, resins, napthalene, Urea, food oils are just a few systems that utilize STEREO-HEAT® tracing.
|
|
Applications:
Heating of pipes, containers, pumps, filter, flanges, connections of the heating hose.
|
|
| ... products without technical information |
| |
ASTER SERIES
PVC belts with embossed top cover specially suited for inclined and declined conveyance. Most of them have 2 plies, rigid weft and are antistatic. There also are food belts, resistant to abrasion or flame retardant. Recommended applications: conveyance in airport facilities and packaging, irregular shaped bundles, organic and bulk products, etc.
|
|
ESPOT SERIES
White coloured PVC belts with a chemical composition similar to CLINA belts, differing in their flexible weft, double cover, and greater loading capacity. All of them are antistatic, resistant to abrasion and to animal and vegetal oils and greases. Specially suited for the throughed conveyance of foodstuffs, and for bucket elevator applications.
|
|
|
|
|
|
Goodyear EP's premium all-purpose fabric conveyor belt construction can be used in a variety of industries and applications with most of Goodyear EP’s exclusive rubber cover compounds. This product has proven itself successful since its inception in 1995.
Excellent rip, tear and impact resistance
Specially designed crimped warp cords straighten on impact and then recover their original shape. This enables the fabric to absorb greater impact loads and resist tearing for long-lasting durability and lowest cost-per-ton conveyed.
High ultimate strength
Plylon Plus withstands severe tension spikes at start-up, retains mechanical fasteners and withstands continuous flexing around pulleys. This higher ultimate strength makes a critical difference in abusive operating conditions.
Reduced stretch
The combination of fabric design and dip process provides less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduces the number of splices at break-in. Contact your local Goodyear representative to calculate permanent and elastic elongation requirements for your specific systems.
Applications:
Primary Crushers
Secondary Crushers
Pit Belts
Stacker Conveyors
Mainlines
Coal Prep Plant
Ship Unloaders
Log Decks
Log Debarkers
Trash and Recycling
|
|
Cover Profile, PP, Slot 8-10
Cover Profile, PP, Slot 8
Cover Profile, Aluminum, Slot 8
Cover Profile, NBR, Slot 8
Plug-in Profile, TPE, Slot 8+10
Plug-in Profile, TPE, Slot 5, 6, 8+10
Cover and Reduction Profile, PP, Slot 5
Cover and Reduction Profile, PP, Slot 6
Cover and Reduction Profile, PP, Slot 8
Cover and Reduction Profile, PP + TPE, Slot 8
Holder profile, PP + TPE, groove 8-10, can be fitted later
Cover and Reduction Profile, PP + TPE, Slot 10
Clamping Spring, Stainless Steel, Slot 10
|
|
HIGH VISIBILITY COVERS FOR MHEOLES
THE ONLY FULL SATURATION OIL BINDER POWDER
The manhole security cover is used to prevent seepages
- Easy to use in case of emergency; it must be just laid down on the manhole
- Made of valuable polymers, hard-wearing and flexible, it adheres perfectly to grounds which are uneven, nubby and cracked.
- Resistant to water, hydrocarbons and to the most aggressive chemicals.
- The cover is practically eternal: after the use it must be only washed before it is ready to be used again.
- Available in 6 different sizes
|
|
|
|
|
|
VENTFAB™ Ventilation Ducting
Flexfab's Ventfab consists of a full line of standard and custom ventilation ducting that is available for a variety of applications where foul or fresh, heated or cooled air needs to be exhausted or intruduced...
A full line of standard and custom ventilation ducting is available for a variety of applications where foul or fresh, heated or cooled air needs to be exhausted or introduced.
A rugged, one-ply coated fabric air duct designed for maximum air handling capabilities and minimum weight. The duct is reinforced with a galvanized spring steel, helically coiled wire. Abrasion resistance is assured by the use of an extended "Vin-O-Fab" cover over the wire. A soft cuff to facilitate installation is an integral part of the assembly. Ventfab can be designed for your special fume control system.
Characteristics of Flexfab's Ventfab product...
Easily retracted
Lightweight, easily stored and transported
Designed for use in handling large volumes of air at relatively low pressure.
Additional materials are available: Teflon© coated fiberglass, vinyl coated fiberglass, neoprene coated fiberglass, neoprene coated cotton, neoprene coated nylon, silicone coated fiberglass. Consult factory for additional specifications, materials, sizes and
|
|
Casing: supple for ventilation and heating
Induction Casing: smoke, dust, waste, cuttings, sugar, cereal, powders
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
