|
|
Air Precision has also developped a range of standard electrical slip rings : EEG, T13 and T20.
They use the same "gold" technology as custom-built slip rings and therefore have excellent electrical qualities and are easily adaptable thanks to interchangeable mechanical interfaces.
Derivates of those standard slip rings are also available.
CONTACT US :
by email : sales@airprecision.com
by phone: +33 1 46 01 21 16
DO NOT HESITATE TO VISIT OUR WEBSITE IN ENGLISH :
www.airprecision-slipring.com
YOU CAN ALSO VISIT OUR FRENCH WEBSITE :
www.airprecision.com/collecteur-electrique/collecteur.asp
|
|
|
The LT Series rotary unions from DSTI feature all-aluminum construction for light weight & excellent durability. These units are available with up to (12) independent passages, with optional electrical slip rings with up to (56) circuits. The LT Series products are a readily available solution for todays complex automation requirements.
|
|
Rotary Systems' three passage rotary union with integrated 6 circuit slip ring. The union is constructed from plated carbon steel. The union utilizes a hardened and ground shaft, Teflon seals and radial ball bearings.
The slip ring is a 6 circuit compact commercial capsule rated at 2 amps/210VDC or 240VAC. Gold on Gold contacts with speeds up to 250 RPM. Several circuit configurations for the slip ring and number of passages on the rotary union are available upon request.
Please contact our Technical Sales department at 1-800-959-0146 with your operating parameters if you need a rotary union with an integrated slip ring. Slip rings are available in various configurations and can be modified to meet your specifications.
|
|
Rotary Systems is capable of integrating a slip ring into our line of stock rotary unions as shown in the picture. This is designed into our unions to allow for continuous 360 degree rotation of electrical power and/or data signals. Multiple circuits and power capacities are available.
Two of our rotary unions with slip rings integrated into the design are shown in the picture. The smaller union has two passages with 1/8” NPT connections. It is designed with a six circuit integrated slip ring. The larger union is a four passage unit with 1/2” NPT connections. This union is designed with a three circuit “pancake style” slip ring.
Please contact our Technical Sales department at 1-800-959-0146 with your operating parameters if you need a rotary union with an integrated slip ring. Slip rings are available in various configurations and can be modified to meet your specifications.
|
|
MULTIRING LOW-COST
The multiring low-cost slip ring is suitable for transmition of electric signal in positioning systems (video camera rotating or any other rotative movement).
The slip ring is made of two ABS and glas in stator part and out caming cables in the rotating axe.
MULTIRING Type LC-20 (20 rings)
MULTIRING Type LC-13 (T3 rings)
2 Amps Each Ring
The electric contact is realized with wire silver or gold protection depending from the utilization.
The multiring LC collector is a very low resistance contact and is particularly suitable for data bus application.
|
|
|
The SE Series rotary unions were designed for the machine tool industry, but are currently used in a number of industrial applications. DSTI's exclusive RotaRing rotary union/electrical slip ring products allow both fluids & electricity to be transferred through the assembly.
|
|
Rotary Systems' four passage rotary union with integrated 36 circuit slip ring. The union is constructed from plated carbon steel. The union utilizes a hardened and ground shaft, Teflon seals and radial ball bearings.
The slip ring is a 36 circuit compact commercial capsule rated at 2 amps/210VDC or 240VAC. Gold on Gold contacts with speeds us to 250 RPM. Several circuit configurations for the slip ring and a broad range of passages on the rotary union are readily available.
Please contact our Technical Sales department at 1-800-959-0146 with your operating parameters if you need a rotary union with an integrated slip ring. Slip rings are available in various configurations and can be modified to meet your specifications.
|
|
Gamme JR : Pour plateaux indexeurs, joints tournants multivoies, mixte multircuits électrique en option : jusqu'a 12 voies pour air comprimé ou vide et 24 circuits electriques.
Gamme JC : Principe exclusif sans pièces de frottement (1 ou 2 voies). Applications jusqu'a 20 000 t/min et 100 bars. Fonctionne à sec.
|
|
| ... products without technical information |
| |
|
Our Atlantic Fluidics axial flow liquid ring vacuum pumps are highly efficient and rugged. Their "abuser-friendly" shrouded rotor design allows starting even in a flooded state without fear of damage. Single and multistage pumps are available, capable of achieving ultimate pressures of 4 Torr (5.3 mbar). Close coupled and separate drive configurations are available.
|
|
Technical data:
Capacity up to 1000(m3/h)
Vacuum up to 730 (mmHg)
Design:
Liquid ring vacuum pumps CEL (single stage) and CEH (two-double) are rotary pumps, with star type impeller eccentrically placed in the cylindrical body.
The principle of operation is based upon the rotation of the impeller eccentrically placed in the cylindrical body, so that the auxiliary liquid forms “water ring”. During the rotation, a part of the water ring enters and emerges among the blades of the impeller so discharging (sucking part) of the operating gas (air), forms appropriate vacuum. The direction of rotation is signed with an arrow on the pump itself.
Except the impeller, the pump has no other movable parts, so that there is no need of any additional lubrication (except bearings) and the sealing between the impeller and the side plates is realizes with the auxiliary liquid.
The water ring also absorbs the whole water vapor that enters with the working gas, thus absorbing the impurities and taking off the heat of the gas.
The service liquid is usually water with optimal working temperature of +150C (max. 450C).
CEL - single-stage pumps with maximum vacuum of 610 (mmHg) can be used in
CEH – double-stage pumps with maximum vacuum of 735 (mmHg)
Applications:
- Paper and cellulose industry,
- Milking sets
- Absorption of vapors in ironing units
- Filter purification
- Humidity absorption of the fabric in textile industry,
- formation and maintenance of the vacuum in the vacuum plants,
- in chemical and pharmaceutical industry,
- in food industry,
- desalination plants,
- in impregnating equipment,
|
|
|
KINNEY KLRC liquid ring vacuum pumps are ideally suited for pumping wet mixtures and even slugs of liquid. These rugged vacuum pumps are available in various construction materials such as stainless steel, cast iron, and bronze fitted.
|
|
Key Facts for the NASH Liquid Ring Vacuum Pumps:
· Vacuum pumps from 20 CFM to 23,000 CFM
· Vacuum pumps to 29+ " HgV
· Vacuum pumps designed to operate safely, cleanly and continuously in wet environments.
· Require minimal care - known for extremely low maintenance.
· Provide years of dependable service and quality liquid ring vacuum pumps due to fewer, generously proportioned parts.
· Reduce power and operating costs of liquid ring vacuum pumps, handling higher capacities with less energy/power.
· NASH is the inventor of the liquid ring principle of operation
|
|
The comprehensive Sterling SIHI range of liquid ring vacuum pumps is available in single and two stage designs, with suction capacities up to 12000 m3/h and suction pressures in the range 33 to 1013 mbar. In addition, above atmospheric pressure these pumps can be used as compressors.
SIHI FULL RANGE PERFORMANCE
Capacity - 12,000 m3/h
Suction pressures - 33 to 1013 mbar
The latest addition to this is the SIHI LPH-X range, which is available in one and two stage variants and able to operate at 50Hz and 60Hz.
It has been designed for interchangeability with the well established LPHA range and offers the lowest cost of ownership.
SIHI LPH-X PERFORMANCE
Single stage:- Suction pressures - 120 to 1013 mbar
Suction volume flow - 50 to 850 m3/h
Two stage:- Suction pressures - 33 to 1013 mbar
Suction volume flow - 44 to 800 m3/h
FEATURES
• Interchangeable with previous LPH range
• Complies with ATEX legislation
• Single and two stage
• Modular construction
• Compact design
• Fewer components
• Extensive range of sizes, materials and
sealing combinations
• Seal accessibility
• Engineered systems
|
|
|
Our Liquid Ring Vacuum Systems are ideal for pumping wet gas mixtures at low pressures. A wide variety of configurations are available, incorporating Kinney or atlantic fluidics liquid ring vacuum pumps. Performance ranges to 560 CFM (950 m³/h) in standard systems, or to 10000 CFM (17000 m³/h) in Engineered Solution Vacuum Systems.
|
|
| ... products without technical information |
| |
WRAPPING MACHINE TOSA 125E
AUTOMATIC PALLET STRETCH WRAPPING MACHINE WITH ROTATING RING
EQUIPPED WITH WATERTIGHT TOP SHEET DISPENSER
This machine, with rotating film-roll, allows to obtain a steady and compact packing of all sorts of palletized load by a differentiated wrapping on products of sundry nature. An overall packing (five sides) is guaranteed for all sorts of palletized products by the waterproof top sheet dispenser integrated in the machine. Such a wrapping provides an excellent protection against the action of the weather. The possibility of carrying out different wrapping cycles is the main feature of this machine. The wrapping program, in addition to the complete cycle, allows to carry out a downward cycle only, an upward cycle only, a wrapping of the top or the bottom of the pallet only and a waterproof cycle. This machine can be installed on any existing packing line and it perfectly meets high production needs. It is complete with top pneumatic presser, powered pre-stretch assembly, film hooking and cutting unit, film sealing unit, boundary safety-guards, control board with PLC and different adjusting and control units.
|
|
|
Designed to meet the demands of high-volume operations, the Octopus 202 delivers high speed wrapping and superior film economy while producing secure, attractive pallet loads. The Octopus 202 automatic stretch wrapping system features a patented rotary wrapping ring, which can be programmed to start and stop film application at any height on the load without returning to the starting point. This reduces film costs by up to 50% and generates a virtually unlimited selection of wrapping patterns. This compact machine uses minimal floor space so it fits easily into tight spaces and can mount over existing conveyor or be equipped with its own conveyors. The Octopus 202 wraps up to 50 loads per hour.
|
|
Octopus 303 Automatic :
- Wraps up to 60 loads per hour
- Heavy duty construction
- Pre-stretches film up to 300%
- Rotary ring design increases film savings
- Installs over existing conveyor or can beprovided with conveyor
- Allen-Bradley PLC control
- Octo-Thread carriage allowseasy film threading
|
|
Octopus 808 Automatic
- Wraps up to 120 loads per hour
- Heavy duty construction
- Pre-stretches film up to 300%
- Cut and heat seal design increases film savings
- Installs over existing conveyor or can be provided with conveyor
- Allen-Bradley PLC
- Banding and split wrap capabilities
- Optional Pak-Air carriage for load ventilation requirements
- Octo-Thread carriage allows easy film threading
- Strain gauge film delivery control
- Optional integral top sheet dispenser
|
|
The Mancon 1710-2265 with its fabricated steel construction frame is designed for high speed stretchwrapping with a low maintenance in continuous end of line production environments. The machines technology will easily and effectively wrap pallets with palletised goods on them (usually presented inside the machine by conveyors), secured enough for transportation.
The machine is fitted with an easy film loading Power Pre-stretch Film Carriage for film savings due to cost effective wrapping and pallet stability programs. The machine can automatically apply mid cycle top sheet for dust or water protection.
Advance controls on the machine enable simple and reliable operational view of the stretchwrapping sequences and fault finding. The pallet remains stationary whilst the high speed (40rpm) graphite rotation ring (patent) with Film Carriage circles, and moves up and down applying film to the pallet. Infrared welding (patent) and cutting of the film at cycle end ensure complete secure encapsulation. The Mancon 1710-2265 is CE marked for safety and performance. Full service and spares support.
|
|
The H2000 is REO PACKs ‘ring’ stretchwrapper , a rotating ring and film carriage is lowered over the pallet.
- Capacity over 90 pallets/hour
- Flexible wrapping patterns
- ISS ( Integrated Seaming System ) film cut off and welding without product contact
- All wrap parameters can change with each wrap program
The H2000 is equipped with a state of the art control system which ensures optimal wrapping performance. The ring wrapper is the most versatile type of stretchwrapper, options include:
- Adjustable start and stop position
- Banding of pallets
- Single and cross wrap programs
- Double pallets can be wrapped individually
- ISS ( Integrated Seaming System ) eliminates film tails
- Double motorised power pre-stretch system for optimum film economy
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
