|
|
|
|
|
|
The flexible cuffs QuickFlex are used without the processes for powders or granulated. They allow d%u2019isoler mechanically equipment the ones compared to the others. Ex: to isolate a vibrating sifter compared to his screw from proportioning.
QuickFlex consist of:
- 2 rigid pipes to weld onto the 2 parts of the process having to receive the cuff. These pipes are equipped with patented sections, adapted to the QuickFlex cuff.
- 1 flexible pipe whose two ends are equipped with bands d%u2019acier with spring moulded in l%u2019élastomère of the cuff. The installation of the cuff is done in a very simple way, by deforming the band d%u2019acier with spring in order to l%u2019insérer in the rigid pipes. The original shape of the section ensures then a perfect sealing of the cuff.
The assembly is done without tool in less than 20 seconds. One thus eliminates the risks to be wounded with screwdrivers during tightening from the traditional collars. Moreover the sleeve is adapted perfectly to the pipe.
No zone of retention n%u2019exist enters the flexible cuff and the pipe.
The system is tight with the emissions of dust. It resists an explosion of dust.
From its design, the phenomena of shearing of the cuff by the collar are eliminated.
Various d%u2019élastomères qualities are available:
Let us quote in example a food translucent polyurethane execution allowing to control l%u2019interior of the process visually.
For l%u2019industrie mineral, flexible cuffs in Kevlar are available.
These cuffs are available in a diameter ranging between 100 and 650 Misters.
|
|
The 2" coupling size probably covers the most diverse selection of applications in the Todo-Matic family. Available in a range of material and connection configurations, Todo-Matic 2" is designed for rapid and safe transfers. Offshore chemical dosing, pharmaceutical feedstock and aggressive chemical vapor transfer are just some of the challenging applications Todo-Matic couplings see on a daily basis.
|
|
Ultra Thin-wall Flexible Metal Roll is extremely thin at only 0.03 mm. It is soft and flexible, yet rigid with high tensile strength of stainless steel. This roll shows the best performance when used in a fuser unit of a printer or copier, realizing wall contact and shorter standing-up time.
Features
Ć Thickness: 30 micron minimum
Ć Seamless
Ć Create wall contact rather than line contact, resulting in effective nipping
Ć Excellent thermal conductivity resulting in shorter stand-up time and conservation of electricity
Ć High tensile strength of stainless steel
Ć Smooth surface
Ć High precision in thickness, roundness, outer and inner diameter
Ć Light
Ć Plating, plastic coating, and rubber coating on surface
Ć Choice of magnetism and nonmagnetism
Application
Ć Fusing unit in a printer or copier
Ć Other parts in a printer or copier
Ć Motor cover, Rotor cover, Stator cover
Ć Plastic Sheet forming, Film forming
Ć Lamination
Ć Seamless Bellows
|
|
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
| ... products without technical information |
| |
RPS markers are heat shrinkable marking sleeves for wire and
cable identification. When RPS is printed with Tyco Electronics
recommended printers and ink ribbons, the marks remain legible,
without any post printing process, even when exposed to
abrasion, aggressive cleaning solvents, and industrial fluids.
RPS markers are designed to meet the wire identification needs of
commercial and industrial customers.
Features and benefits
Permanent identification sleeves
Computer printable
Excellent print performance
Configured for ease of kitting
Good chemical and solvent resistance
3:1 shrink ratio
CSA Certified, UL Recognized
|
|
TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements.
Made from durable, flame retardant, radiation crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves can be used in a wide variety of applications.
All TMS-SCE meet the performance requirements of SAE-ASM-DTL-23053/5 class 1.TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL-23053/5 classes 1 and 3. The marks are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAEAS81531 4.6.2 and MIL-STD-202 both before and after shrinking.
|
|
PHZ
- Flexible zero halogen thin wall polyolefin heat shrink tubing for marking on site.
- Excellent properties of fire safety characteristics.
- Low smoke generation and evolution of acid gases.
- Flexible and easy mounted on cables and wires.
- 2:1 shrink ratio.
- Reduced overall assembly and marking costs on site when using Partex marking machines and software.
|
|
| ... products without technical information |
| |
|
Aluminum Dome Roofs for Aboveground Storage Tanks may comply with specified requirements or industry standards such as API 650 Appendix G, AWWA D-100 for welded steel tanks or AWWA D103 for bolted water tanks.
|
|
The Architectural Side of Temcor
The distinctive appearance of Temcor Aluminum Domes and Crystogons, combined with their unsurpassed quality have appealed to architects and builders worldwide.
With the ability to cover clear-spans as large as 1000 feet, Temcor has built churches, gymnasiums, auditoriums, exhibit halls, arenas and convention centers.
Dramatically beautiful on the outside, the interiors of Temcor clear-span structures are no less spectacular. With their panelized insulation system, Temcor domes are often acoustically superior to conventional buildings.
The Temcor Aluminum Dome is one of the most versatile of the clear-span structures, featuring a triangulated space truss of wide-flange extrusions skinned with triangular panels.
The Crystogon® is a variation on the Temcor Aluminum Dome space truss, featuring transparent or translucent glazed acrylic or glass panels. It can be configured in circular, hexagonal, square or vaulted designs.
|
|
Temcor Aluminum Domes, covers and structures are the first choice for thousands of industrial applications worldwide. Featuring all-aluminum construction, Temcor industrial enclosures are lightweight, corrosion-resistant, and maintenance-free, which translates to longer life and lower costs. They don't rust like steel, they don't degrade with ultraviolet light like fiberglass, and they don't spall like concrete. And, their strength and versatility are unmatched.
Temcor Aluminum Domes have revolutionized petroleum tank covers. They protect precious resources like water and they are the ideal environmental enclosure for water treatment, materials processing and bulk storage. Temcor also produces a full line of non-circular, flat, column- or truss-supported aluminum enclosures and an OEM line of Temcor Domes paired with Aquastore Tanks.
|
|
Temcor Clear-Span Aluminum Domes
Efficient in design, distinctive in appearance, unsurpassed in quality and value - Temcor Aluminum Domes are as beautiful as they are efficient and enduring.
Design Flexibility
The Temcor Aluminum Dome is a unique and patented triangulated space truss skinned with aluminum panels secured by a patented Temcor batten closure system.
With an ability to cover spans from 40 to more than 1000 feet, Temcor Aluminum Domes are specified for churches, arenas, planetariums and observatories... wherever clear-span roof systems are needed. Aluminum integrated structural frames are permanent and lightweight and optional panel systems offer eye-dazzling options.
|
|
The double-fold aluminum coverings are a modular system which is suitable for the protection and safety of workers at construction sites and excavations.
Light and practical frames can be assembled onto MP structures, as well as wall and tower structures using any kind of lifting method.
|
|
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
STEREO-HEAT® Impedance Heat Tracing is a direct current electric traced system across the ends of a steel or alloy pipeline section that provides even heat distribution on short to medium runs of preinsulated pipe.
STEREO-HEAT® Impedance Heat Tracing is based on the application of AC voltage across the ends of an insulated pipeline section on short and medium runs of pipe causing a current flow in the pipe walls that generates heat. This is an engineered custom designed system within ANSI/IEEE 844, NEC 426,427 and your specification requirements. This system can be retrofitted onto an existing pipe system or as part of a preinsulated PERMA-PIPE® system. Applications such as liquid food products, oil, asphalt, resins, napthalene, Urea, food oils are just a few systems that utilize STEREO-HEAT® tracing.
|
|
Applications:
Heating of pipes, containers, pumps, filter, flanges, connections of the heating hose.
|
|
| ... products without technical information |
| |
|
|
|
|
VENTFAB™ Ventilation Ducting
Flexfab's Ventfab consists of a full line of standard and custom ventilation ducting that is available for a variety of applications where foul or fresh, heated or cooled air needs to be exhausted or intruduced...
A full line of standard and custom ventilation ducting is available for a variety of applications where foul or fresh, heated or cooled air needs to be exhausted or introduced.
A rugged, one-ply coated fabric air duct designed for maximum air handling capabilities and minimum weight. The duct is reinforced with a galvanized spring steel, helically coiled wire. Abrasion resistance is assured by the use of an extended "Vin-O-Fab" cover over the wire. A soft cuff to facilitate installation is an integral part of the assembly. Ventfab can be designed for your special fume control system.
Characteristics of Flexfab's Ventfab product...
Easily retracted
Lightweight, easily stored and transported
Designed for use in handling large volumes of air at relatively low pressure.
Additional materials are available: Teflon© coated fiberglass, vinyl coated fiberglass, neoprene coated fiberglass, neoprene coated cotton, neoprene coated nylon, silicone coated fiberglass. Consult factory for additional specifications, materials, sizes and
|
|
Casing: supple for ventilation and heating
Induction Casing: smoke, dust, waste, cuttings, sugar, cereal, powders
|
|
| ... products without technical information |
| |
ASTER SERIES
PVC belts with embossed top cover specially suited for inclined and declined conveyance. Most of them have 2 plies, rigid weft and are antistatic. There also are food belts, resistant to abrasion or flame retardant. Recommended applications: conveyance in airport facilities and packaging, irregular shaped bundles, organic and bulk products, etc.
|
|
ESPOT SERIES
White coloured PVC belts with a chemical composition similar to CLINA belts, differing in their flexible weft, double cover, and greater loading capacity. All of them are antistatic, resistant to abrasion and to animal and vegetal oils and greases. Specially suited for the throughed conveyance of foodstuffs, and for bucket elevator applications.
|
|
|
|
|
|
Goodyear EP's premium all-purpose fabric conveyor belt construction can be used in a variety of industries and applications with most of Goodyear EP’s exclusive rubber cover compounds. This product has proven itself successful since its inception in 1995.
Excellent rip, tear and impact resistance
Specially designed crimped warp cords straighten on impact and then recover their original shape. This enables the fabric to absorb greater impact loads and resist tearing for long-lasting durability and lowest cost-per-ton conveyed.
High ultimate strength
Plylon Plus withstands severe tension spikes at start-up, retains mechanical fasteners and withstands continuous flexing around pulleys. This higher ultimate strength makes a critical difference in abusive operating conditions.
Reduced stretch
The combination of fabric design and dip process provides less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduces the number of splices at break-in. Contact your local Goodyear representative to calculate permanent and elastic elongation requirements for your specific systems.
Applications:
Primary Crushers
Secondary Crushers
Pit Belts
Stacker Conveyors
Mainlines
Coal Prep Plant
Ship Unloaders
Log Decks
Log Debarkers
Trash and Recycling
|
|
|
|
|
|
Standard Roll-Up Covers:
P.E.I. Roll-up Covers are normally equipped with our patented system of multiple springs. This offers countless advantages:
Without Canister
• Reliability
• Extremely high speeds
• Resistance to high and low temperatures
• Compact size
• Easy installation
• Constant tensioning
• 1,000,000 movements guaranteed
With Canister
• Protects roller from accidental impact
• Integral wiper keeps band clean
• Attractive appearance
• Wide variety of fastening systems
• Materials: Aluminum, Steel, Stainless Steel
• 1,000,000 movements guaranteed
Special Roll-Up Covers:
Sure-Spring
The P.E.I. Patented design known as SURE-SPRING® represents the most advanced level of technical innovation in the field of roll-up covers.
The spring mechanism design takes into account the intrinsic defects in other rollers available on the market, and overcomes them by means of a radical new design of the spring mechanism.
The second major innovation consists of the mechanical system to fasten the band to the tube.
No adhesives are needed for this roll-up cover!!
In addition to those of standard P.E.I. roll-up covers, P.E.I. SURE-SPRING® roll-up covers offer the following advantages:
• Advancement speeds of up to 150 m/min.
• Acceleration up to 2g.
• 2,000,000 movements guaranteed.
Roll-Up Covers with Chain Movement
SHIELD X-Y 4R
SHIELD X-Y SP-SB
ARMOR BAND
Flexible Aluminium Covers
Riveted Apron Covers
Cover Type J
Cover Type JL
|
|
The Aprons Series AGS Mini AGS I AGS II (Hennig)
Stable and flexible in an obstruction narrow.
Anodic aluminum profiles.
Part of articulation preventing the large impurities and allowing a self-cleaning during the movements.
Resisting a high room temperature.
Corrosion resistant (anodic aluminum).
Great rigidity even for big lengths
Piétonnable: AGSI (up to 750 mm of range of support). AGS II (up to 2500 mm of range of support).
Interchangeable profiles.
Side guidance nonnecessary.
AGS I and AGS II are available with countersunk or projecting rivets (out of standard), on each side all the 2 Misters.
Ideal for the application with rolling up.
|
|
|
|