|
|
Air Precision has also developped a range of standard electrical slip rings : EEG, T13 and T20.
They use the same "gold" technology as custom-built slip rings and therefore have excellent electrical qualities and are easily adaptable thanks to interchangeable mechanical interfaces.
Derivates of those standard slip rings are also available.
CONTACT US :
by email : sales@airprecision.com
by phone: +33 1 46 01 21 16
DO NOT HESITATE TO VISIT OUR WEBSITE IN ENGLISH :
www.airprecision-slipring.com
|
|
|
The LT Series rotary unions from DSTI feature all-aluminum construction for light weight & excellent durability. These units are available with up to (12) independent passages and optional electrical slip rings with up to (56) circuits. The LT Series products are a readily-available solution for today's complex automation requirements.
|
|
Rotary Systems' three passage rotary union with integrated 6 circuit slip ring. The union is constructed from plated carbon steel. The union utilizes a hardened and ground shaft, Teflon seals and radial ball bearings.
The slip ring is a 6 circuit compact commercial capsule rated at 2 amps/210VDC or 240VAC. Gold on Gold contacts with speeds up to 250 RPM. Several circuit configurations for the slip ring and number of passages on the rotary union are available upon request.
Please contact our Technical Sales department at 1-800-959-0146 with your operating parameters if you need a rotary union with an integrated slip ring. Slip rings are available in various configurations and can be modified to meet your specifications.
|
|
Rotary Systems is capable of integrating a slip ring into our line of stock rotary unions as shown in the picture. This is designed into our unions to allow for continuous 360 degree rotation of electrical power and/or data signals. Multiple circuits and power capacities are available.
Two of our rotary unions with slip rings integrated into the design are shown in the picture. The smaller union has two passages with 1/8” NPT connections. It is designed with a six circuit integrated slip ring. The larger union is a four passage unit with 1/2” NPT connections. This union is designed with a three circuit “pancake style” slip ring.
Please contact our Technical Sales department at 1-800-959-0146 with your operating parameters if you need a rotary union with an integrated slip ring. Slip rings are available in various configurations and can be modified to meet your specifications.
|
|
Air Precision has also developped a range of standard electrical slip rings : EEG, T13 and T20.
They use the same "gold" technology as custom-built slip rings and therefore have excellent electrical qualities and are easily adaptable thanks to interchangeable mechanical interfaces.
Derivates of those standard slip rings are also available.
CONTACT US :
by email : sales@airprecision.com
by phone: +33 1 46 01 21 16
DO NOT HESITATE TO VISIT OUR WEBSITE IN ENGLISH :
www.airprecision-slipring.com
|
|
|
The SE Series rotary unions were designed for the machine tool industry, but are currently used in a number of industrial applications. DSTI's exclusive RotaRing rotary union/electrical slip ring products allow both fluids & electricity to be transferred through the assembly.
|
|
Rotary Systems' four passage rotary union with integrated 36 circuit slip ring. The union is constructed from plated carbon steel. The union utilizes a hardened and ground shaft, Teflon seals and radial ball bearings.
The slip ring is a 36 circuit compact commercial capsule rated at 2 amps/210VDC or 240VAC. Gold on Gold contacts with speeds us to 250 RPM. Several circuit configurations for the slip ring and a broad range of passages on the rotary union are readily available.
Please contact our Technical Sales department at 1-800-959-0146 with your operating parameters if you need a rotary union with an integrated slip ring. Slip rings are available in various configurations and can be modified to meet your specifications.
|
|
Gamme JR : Pour plateaux indexeurs, joints tournants multivoies, mixte multircuits électrique en option : jusqu'a 12 voies pour air comprimé ou vide et 24 circuits electriques.
Gamme JC : Principe exclusif sans pièces de frottement (1 ou 2 voies). Applications jusqu'a 20 000 t/min et 100 bars. Fonctionne à sec.
|
|
| ... products without technical information |
| |
Slip ring motors S..R 132 to 315, duty S1, continuous operation S..H 132 to 315, duty S3, intermittent duty
Output range 2.2 kW to 315 kW
Speeds 3,000; 1,500; 1,000; 750; 600; 500; 375 rpm
Features Designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42679 (S..R) and DIN 42681 (S..H), robust, low-vibration grey-cast iron design, degree of protection IP 54 / IP 55, higher degrees available on request, class F insulation, class H available as an option, energy-efficient and environment-friendly, various modifications possible
|
|
YH Series (IP44) High Slip Three-Phase Induction Motors
YH series (IP44) motors are derived from the Y series (IP44). Not only having the advantages of Y series motors but also designed with high slip performance, the motors have high stall torque, small stall current and shock-resistance in loading.
|
|
As a result of their modular design, the 1R.5 slipring rotor motors (US: wound-rotor motors) can be produced with various cooling systems. This means that the motors can be flexibly adapted to the customers's application.
The enclosed slipring compartment – located inside the NDE bearings – guarantees a high degree of protection for the complete motor, i.e. for the motor and slipring compartment.
Brief overview
Motor type: Slipring rotor
Water-cooled motors: 1RU5 type series
Air-cooled motors: 1RR5 type series
Shaft heights: 400, 450, 500, 560, 630, 710, 800, 900 mm
Power range: 0.3 to 8 MW
Rated voltages: 3.3 - 11 kV
Degree of protection: IP55
Cooling type: IC 611, IC 81 W, IC 01
Type of construction: IM B3 (IM 1001)
Bearings: Roller bearings (up to SH 710), sleeve bearings (from SH 800)
Regulations/Standards: IEC, EN
|
|
As a specialist for customer-designed solutions we are able to achieve optimised customer-specific solutions at an extremely competitive price for turbo, spiral lobe-type, piston and rotary-piston compressors. They can be used for induction engines with squirrel-cage rotors or slip-ring rotors within a voltage range between 380 V and 13.8 kV (20 kV) with up to 25 MW output and all standard cooling types.
The extraordinary strength of our products lies in their reliability, efficiency and optimal start-up performance. In addition to their longevity and high availability, our extremely low-maintenance products offer the customer the benefits of energy-saving operation and easy start-up time.
|
|
|
|