|
|
C850 NG - Technical Data
- Lifting capacity: 90 t | 3.9 m
- Engine power: 440 kW
- Main winch: 250 kN
- Auxiliary winch: 110 kN
- Max boom length: 42 m
- Operating weight: 80 t
|
|
Equipped with REXROTH and Kawasaki hydraulics components imported from Germany and Japan;
Excellent micro-mobility performance;
Independent main and auxiliary winches, convenient for operation;
Multi-disk clutch and brakes are self-compensated, free of adjustment, automatic compensation;
Travel with heavy load feature, and free-fall hook increase operation's efficiency and working coverage;
Built-in features as torque limiter, electronic controller and over-winding prevention device enhance operation safety;
Larger chassis is used for better stability;
Light weight and small specific ground pressure;
Adjustable track width for transportation convenience;
High-strength steel pipe boom for high load capacity.
|
|
The MPS crane is ideal for the rapid turnover of containers and has the following characteristics:
Fixed, slewable jib positioned at the centre of the gantry.
Turntable for the (automatic) positioning of containers on land as well as on board vessels using 4-point suspension.
High speed hoisting gear.
Gantry travels on rails in order to serve each hold.
|
|
Single jib and double jib cranes.
Tipically used for handling harbor general load and in ship construction.
Capacity form 10 up to 150t.
|
|
The Heavy Lift Mast Crane (HLMC) can be defined as a compact powerful rotating crane with very high lifting capacities. It is specially designed for use on Heavy Lift Vessels, for over sea transport of large and heavy equipment.
Most of the HLMC's are installed in a tandem configuration, sometimes one on each side, sometimes both on the same side of the vessel. The capacity, range and structure are excellent for this specialized use.
- Applicable for harbor/ sheltered water lifts
- Slewing range is limited to 450 degrees due to fixed position of winches below mast foot in ships hull
- Capacities in a range from 200 mt up to 7500 mt
- Load moments in a range from 3000 tm up to 200,000 tm
- Welded box girder or lattice type jibs
- Extremely small tail swing (when no operators cabin is installed)
|
|
Konecranes offers a comprehensive range of jib portal and goliath gantry cranes for shipbuilding. These products have consolidated their position as one of the technical leaders featuring high performance and reliability combined with comfortable operation and easy maintenance.
Goliath Gantry Cranes
Lifting capacity up to 1200 ton
- upper trolley 2 x 400 ton
- lower trolley 600 ton
Lifting height up to 80 m
Rail span up to 210 m
Double Boom Cranes
Lifting capacity up to 250 ton
Outreach up to 70 m
Lifting height up to 70 m
Rail span 8-18 m
|
|
Based on a large experience of nearly 60 years in the tower crane business, Potain designs and manufactures large tower cranes for special applications such as:
- Dams
- Bridges
- Shipyards and Industries
- High Rise Steel Buildings
With the support of a strong worldwide sales organization, a highly qualified team takes care of these specific projects and provides full solutions to customers - mainly large construction companies and international building project contractors.
These full solutions embrace the following aspects:
- Complete technical engineering and studies for all applications
- General layout of equipment
- Budget cost evaluation including engineering, fabrication, erection, services
- Training, maintenance, and service supervision.
|
|
The mobile harbour cranes range with lifting capacities from 40 tonnes up to 208 tonnes offers practical solutions to various customers needs in any market field - from container handling to bulk operations, from heavy lifts to the handling of general cargo.
The LHM 120 is designed for versatile and efficient handling of individual and bulk cargo loads as well as containers and heavy lifts of all kinds. A maximum lifting capacity of 42 tonnes and 30 m max. radius make the LHM 120 the right solution for cargo handling up to feeder-size vessels.
|
|
Link-Belt
HTC-8690
90-ton (81.6 mt)
Hydraulic Truck Crane
- 38’ – 140’
(11.6 m - 42.7 m)
5-section boom
- Optional 35’ – 58’
(10.7 m - 17.7 m)
two-piece offsettable fly
- Optional two 16' (4.9 m) extensions plus 58' (17.7 m) two-piece offsettable fly
- 237’ (72.2 m) maximum tip height
- Overall dimensions:
Height: 11’ 7” (3.53 m)
Width: 8’ 6” (2.59 m)
Length: 45’ 7” (13.89 m)
- 62.3 mph (99.4 km/hr) travel speed
- 19’ 3” (5.87 m) wheel base
- Front tires - 445/65R22.5;
Rear tires – 12R22.5
- Caterpillar C-13 12.5L 445 hp (331.8 kW) diesel engine
- ZF AS-Tronic automated 12-speed transmission
- 24’ (7.32 m) outrigger spread, 20’ 6” (6.25 m) outrigger base
- 16,880 lbs (7 656.6 kg) maximum winch line pull
- 480 fpm (146.3 m/min) maximum winch line speed
|
|
|
|
|
|
Link-Belt
138 HSL
80-ton (77.62 mt)
Lattice Boom Crawler Crane
- Best capacities in its class!
- 40’ to 200’ (12.19 m to 60.96 m)
tube boom
- 40’ to 160’ (12.19m to 45.72m)
angle boom attachment option
- Live mast standard
- Maximum boom jib length combination
of 180’ + 60’
(54.86m + 18.28m) tube and
150 +60’ (45.72m + 18.28m) angle
- Tier III whisper quite Isuzu power
at 284hp – tops in its class
- Matching high line pull front &
rear drums with Link-Belt designed
“out board style ”wet brake. This
brake design offers low resistance to
free spooling in free fall mode, even
in cold climates.
- Optional front mounted 3rd drum
and or rear mount high line pull
4th drum (with free fall)
- New fast easy counterweight
removal system
- Hydraulic machine “assembly
cylinder” option - mounted in boom
base section for fast easy assembly
& load out
- HSL style cab with latest comfort
technology, high output A.C, AM/FM
radio, 6 way adjustable seat with
djustable console
- Smooth, precise, Bullet proof hydraulic pilot operated function controls for years of trouble free operation and dependability
- HSL 1 Rated capacity limiter with state of the art electronics including color graphic monitor
|
|
With the LR series, Liebherr offers a well-balanced programme of lattice boom crawler cranes. In the class below-300 metric tons, low transport weights, rapid self-assembly, optimum load capacity values across the entire working range and comprehensive operating information are among these cranes' main functional features.
For its larger crawler cranes with lifting capacities up to 1,350 metric tons, Liebherr also offers a wide range of multifunctional jib systems. These cranes can reach heights of up to 223 m at the hook and working radii of up to 152 m, but retain their outstanding manoeuvrability thanks to innovative solutions for the handling of extremely high ballast weights. The LR series is completed by the hydraulic duty cycle crawler cranes range (HS series), which is similar to the LR series in design. The machines have been developed for the most diverse material handling operations. This series comprises 6 models with load capacities between 35 and 200 metric tons.
|
|
|
Manitowoc offers 15 models with capacities ranging from 73 t (80 tons US) to 2 300 t (2,535 tons US). Over 75 years of innovation, experience and passion go into every Manitowoc
|
|
|
The variety of applications of the HS 835 HD is nearly unlimited due to several equipment possibilities and includes jobs like material handling with clamshell, dragline bucket or similar, different types of demolition applications, dynamic soil compaction and jobs with diaphragm wall grab or casing oscillator.
|
|
|
Crawler cranes deliver excellent mobility over soft surfaces. These multiple-purpose cranes can be used in a broad range of applications, ranging from construction to civil engineering and port cargo handling.
|
|
Link-Belt
HC-238H II
150-ton (136.08 mt)
Lattice Boom Truck Crane
- 50’ – 260’
(15.24 – 79.25 m)
tube boom
- Maximum boom & jib
combination: 230’ + 75’
(70.10 + 22.86 m)
- 308’ (93.88 m) maximum
tip height
- 270’ (82.30 m) maximum
360° working radius
- Maximum luffing attachment length:
Luffing boom – 165’ (50.29 m);
Luffing jib – 150’ (45.72 m);
Fixed jib – 30’ (9.14 m)
- 348’ (106.16 m) maximum luffing attachment working height
- 240’ (73.15 m) maximum working 360° radius
- Height - 12’ 6” (3.81 m); width – 11’ 0” (3.35 m); length – 34’ 7.25” (10.55 m)
- 23’ 6” (7.16 m) wheelbase
- 85,334 lbs (38 706 kg) travel weight
- Upper engine: 200 hp (148.4 kW)
- Lower engine: 430 hp (321 kW)
- Outrigger spread: 22’ 8” (6.91 m)
- Outrigger base: 19’ 10” (6.05 m)
- 35,913 lbs (16 290 kg) maximum winch line pull
- 557 fpm (169.77 mpm) maximum winch line speed
|
|
|
Manitowoc offers three lattice-boom truck cranes with capabilities ranging from 132 tonnes (91 tons US) to 272 tonnes (300 tons US).
|
|
|
Depending on the individual application requirements, the LG 1550 can be operated as an 800 t heavy-duty telescopic crane, type LTM 1800, with a 60 m telescopic boom. The new LG 1750, a 750 t powerful lattice boom crane featuring an eight-axle chassis, star support and variable boom system, was unveiled at the BAUMA 2004. LG lattice tower mobile cranes featuring lifting capacities of 550 t and 750 t are heavy-duty cranes and are designed for versatile application conditions.
|
|
|
Manitowoc offers 15 models with capacities ranging from 73 t (80 tons US) to 2 300 t (2,535 tons US). Over 75 years of innovation, experience and passion go into every Manitowoc.
|
|
|
Crawler cranes deliver excellent mobility over soft surfaces. These multiple-purpose cranes can be used in a broad range of applications, ranging from construction to civil engineering and port cargo handling.
|
|
These cranes have been designed for work on particularly high buildings or in extremely restricted spaces.
A new development is the option of fitting these cranes with a horizontal load path. When the jib is moved, the hoist gear is controlled in such a way as to ensure that the hook travels horizontally.
These luffing-jib cranes can avoid any obstruction and slew through 360° under load. Their small slewing radii and raised jib angles of 15 to 70°, even when not in operation, make these cranes particularly advantageous in operations on tight sites containing numerous cranes with overlapping slewing areas.
|
|
|
The MR crane range is specifically suited for congested construction sites. The jib can be luffed to almost vertical attaining excellent underhook heights and obstacle avoidance. The interchangeable base provides the option of multiple installation configurations, including climbing crane and traveling chassis installations. High performance slewing and hoisting equipment provide precise control of loads throughout the entire working radius.
|
|
|
|
|
|
The MK series of mobile construction cranes combines the mobility of a classic truck crane with the functional advantages of a tower crane. MK cranes are designed for push-button assembly by one person.
Numerous operations a day are no problem for these taxi cranes. As mobile construction cranes, they feature state-of-the-art truck-crane chassis. Optimal manoeuvrability is ensured, with various electronic travel modes available to assist the operator.
The MK 63 and MK 100 (MK 110) mobile construction cranes are also fitted with the 45° super-raised jib angle.
MK 63
Standard EN/CE
Max. hook height 25.0 m
Max. lifting capacity 8,000 kg
max. radius 36.0 m
Lifting capacity with max. radius 1,800 kg
MK 80
Standard DIN/FEM
Max. hook height 28.0 m
Max. lifting capacity 8,000 kg
max. radius 42.0 m
Lifting capacity with max. radius 1,700 kg
MK 100
Standard DIN/FEM
Max. hook height 33.0 m
Max. lifting capacity 8,000 kg
max. radius 52.0 m
Lifting capacity with max. radius 1,600 kg
MK 110
Standard EN/CE
Max. hook height 33.0 m
Max. lifting capacity 8,000 kg
max. radius 52.0 m
Lifting capacity with max. radius 1,800 kg
|
|
For several uses Huisman-Itrec produces Offshore cranes. Key feature of this type of crane is the range to the seabed; up to over 3000m is possible.
We make a difference between the Pedestal Mounted Offshore Cranes and the Offshore Mast Cranes.
The Mastcranes are the 'heavy duty' deep water type of cranes, while the Pedestal Mounted Offshore Crane is an auxiliary crane specially made for pipe- and equipment handling on rigs.
Limited deep water capabilities are also possible.
|
|
The SA cranes are available for applications like buoy handling and/or pipe handling.
The crane prime mover is either electric-hydraulic or diesel-hydraulic. EX proof systems are available. The hydraulic system is of a closed type technology with individual circuits for each crane function.
|
|
RT-300 Rough Terrain Crane
Rated Capacity Limiter Standard
Broderson RT-300 Rough Terrain Crane
Capacity on Outriggers 30,000 lbs. (15 Tons)
Pick and Carry Capacity up to 18,300 lbs. (9.15 Tons)
Height 11' 2"
Width 8' 2"
Boom Rotation Continuous 360 Degree
Sheave Height up to 88' 0"
Horizontal Reach up to 80' 0"
4-Wheel Steer Standard
4-Wheel Drive Standard
Powershift Transmission Standard
Diesel Engine Standard
Fully Hydraulic Controls for Smooth Precise Operations
Independent Outrigger Controls
Currently producing 'E' Model
|
|
Link-Belt
RTC-8075
75-ton (68.0 mt)
Rough Terrain Crane
- 41’ – 127’
(12.5 – 38.7 m)
4-section boom
- Optional 39’ 6” – 67’
(12.0 – 20.4 m)
two-piece offsettable fly
- 202’ (61.6 m)
maximum tip height
- Height: 12’ 10.75” (3.93 m);
Width: 10’ 10.5” (3.31 m);
Length: 48’ 9.5” (14.87 m)
- 19.5 mph (31.4 km/hr) travel speed
- 12’ 7” (3.84 m) wheel base
- 29.5x25 (28 pr) tires,
optional 29.5R25 XHA
- Caterpillar C6.6 6.6L 235 hp (175.2 kW) diesel engine
- Spicer 6 speed power shift transmission
- 23’ (7.01 m) outrigger spread, 23’ 3” (7.09 m) outrigger base
- 16,506 lbs (7 503 kg) maximum winch line pull
- 454 fpm (138.4 m/min) maximum winch line speed
|
|
|
Grove RT's feature rugged deep box section frames designed to handle the tough conditions found on job sites. Four steering modes allow easy maneuvering in tight quarters. Since pick and carry applications are typical for RT's, Grove units feature excellent on-rubber operation to enhance productivity.
|
|
H series
Hydraulics make handling of the H series cranes simple. Hydraulic rams on the tower and the jib move the H crane to its working position in no time at all. The folding tower has solid walls that are absolutely tight-welded.
HM series
Hydraulics make handling of the mobile fast-erecting cranes of the HM series simple. With the hydraulic erecting kinematics, erecting of the HM cranes is very easy, fast and safe and can be carried out by a single person.
TT series
The 32 TT fast-erecting crane is a very economical, multitalented machine. It offers seven different jib lengths, load moments to suit the task at hand and three different under-hook heights.
K series
The fast-erecting crane programme of lattice construction extends from 26 to 120 mt. These cranes have various jib lengths and hook heights as well as simple erecting kinematics.
|
|
|
The HD/HDT range of cranes are designed with jobsite efficiency and flexibility in mind. Rapid assembly and erection ensure maximum uptime, while compact dimensions and short rear slewing radius allow the crane to be set up in close proximity to structures. An electric power source (480v or 220v) ensures quiet and efficient operation of the crane via wireless radio remote controls or from the mast-mounted operator cab. HD/HDT cranes are easily transportable using a standard semi-trailer.
|
|
|
Grove ATs combine fast highway speeds with excellent off-road performance and very powerful lifting capabilities. All wheel multiple mode steering provides unrivaled job site mobility and the exclusive MEGATRAK™ suspension system, standard on GMK models, enhances driveability and traction both on and off-road.
|
|
|
|
