|
|
DELTA MEC CONTAINERS
DELTA MEC 400 X 300 Ultra-robust containers made of shockproof material immune to acids and solvents and resistant to damp. With a lid that sits on or slides onto the top and a full base (models 3, 6 and 9) or honeycomb base (models 12, 17, 22 and 32).
DELTA MEC 600 X 400 These shockproof containers immune to chemical agents and damp use the whole surface of the standard European pallet and optimise the internal space by using vertical walls. Stackable and with open or closed handles, they are recommended for pharmaceuticals or small metal products and are also available in non-toxic materials for foodstuffs or in conductive material for electronic components.
DELTA MEC 75 perforated sides, perforated base, open handles. This product’s special dimensions, 600x500xH250 mm, expands the possibilities to use the Delta Mec collection.
|
|
Lidded crate 5121 has been specifically designed for intensive distribution of books and magazines. The cover is equipped with studs and the bottom of the crate has corresponding recesses. Because of the fit between the studs and the recesses, these crates are very stable and strong when stacked. The almost straight crate walls offer an optimal storage space. The ergonomic design ensures optimal mechanical and manual handling. The volume gain is 64% when these crates are nested. The crates thus take up little space during return transport and in storage.
|
|
TAU CONTAINERS
TAU 27, TAU 40, TAU 50 and TAU 70, can be piled and stacked up to 80% of their volume, making them take up less space when empty. Fitted with lids, they are perfect for newspapers and magazines and for pharmaceutical products. Accessories: lids.
TAU 27: 460x345xh245, TAU 40:550x380xh250, TAU 50: 600x400xh300,
TAU 70: 715x440xh280 (external sizes in millimetres).
TAU 30: 580x395xh175, is perforated.
|
|
OMIKRON CONTAINERS
Containers suitable for handling and storing. Resistant to temperatures from -10°C to 100°C. Insertables empties occupy less space. Accessories: lids, stack-flaps, trolley.
OMIKRON 6: 300x200xh165 with sealable sliding lid.
OMIKRON 70: 600x400xh410, OMIKRON 100: 800x400xh410,
OMIKRON 200: 800x600xh550 (external sizes in millimetres).
|
|
Orderpick crate
The orderpick crates have been specifically developed for intensive distribution activities. The orderpick crates have a large orderpick opening allowing goods to be taken out easily. The crates are sturdy, stable when stacked and have very high nesting efficiency. In addition, these swingbar crates are hard-wearing and easy in handling.
|
|
Swingbar crates
The CurTec range of swingbar crates has been specifically developed for intensive distribution processes. The swingbar crates are sturdy, stable when stacked and can be highly efficiently nested. In addition, the swingbar crates are hard-wearing and easy in handling. Swingbar crates are utilised in very diverse market sectors and serve in a variety of logistical applications.
|
|
In addition to the standard lidded crates, CurTec also offers lidded crates which carry the UN mark. This indicates that the crate has passed a drop and stacking test. In order to obtain the UN mark, the crates must pass the following strict tests: a drop test from a height of 1.80 metres with the crate cooled down to -18°C, a 24-hour stacking test up to a height of 3 metres at an ambient temperature of 30°C. During these tests, the seal on the lid must remain intact. This packaging certification is required for the storage and the transportation of certain hazardous goods. Capacities range from 20 to 95 litres.
|
|
scato them American or fustellate
cardboard from the micronda until to triple wave from 2400gr/mq
it prints until to two colors
measures ready standards
benches to I equip |
|
Utz foldable and collapsible multiple-use containers save up to 75 % of the space requirement for empty or return transport. They can be collapsed in no time at all and stacked for storage, awaiting their next task. The robust folding and collapsing mechanism can be operated in a few easy steps. Folding containers simplify the decision to save space: the wealth of different sizes means that the perfect container can be found for almost any application.
* tried and tested collapsing / folding mechanism
* smooth inner walls
* exceptionally strong construction
* easy replacement of damaged components
* impact and scratch-resistant plastic
|
|
Electronics system components are increasingly subject
to electrical charges and other negative factors.
Environmental factors such as electromagnetic fields,
humidity and radioactive radiation can damage
and even destroy electronic components.
People are also subject to the formation of electrostatic
charges which are then discharged near conductive objects.
The relative compensating currents and electromagnetic fields
surrounding electrostatically charged people can damage
or even destroy electronic components.
Considering the electrostatic sensitivity of electronic
components (see table below), it is essential to adopt
precise protection measures. |
|
Robust stackable bin
* The basic structure of the containers is a frame construction on the basis of two standard measurements. Because of a multitude of sizes and versions this container type can be used in many different fields.
* Robust walls - strengthened by ribs – give excellent mechanical characteristics to the box for transport and stacking.
* resistant to nearly all acids and oils
* excellent temperature stability (-20° to +80°C)
* manufactured from recyclable material
|
|
| polypropylene is a suitable material for the contact with alimentary substances. It does not yield anomalous smells and sapori to the alimony and is easy washable and sanificabile after its I use. The isothermic containers are ideal in order protect the alimony from sollicitations of mechanical type thanks to the shim and the structure of the expanded polypropylene to cell sluice; they are light and lacking in alive shelves and chines for protecting the emergency of operating during the operations of handling and the conveying. Resistant, hygienic, economic and riciclabili to 100%, they are compatible to the washing and the industrial disinfection with detergents and disinfectants, warm water and humid vapor till the temperature of 110°C. (HACCP System). It is a expanded polypropylene. It comes expanded with CO2 and it does not have residual agents of expansion. It comes commercialized pre-expanded to density from 30 to 75 g/l. It has a structure that confers it excellent characteristics of dissipation, of energy and of good recovery of the form it originates them. For lowlands density, it demands a pre-treatment. He is riciclabile to 100%. The Group supplies to the customer an accurate and specific service; from the planning of the product, to the construction of the stamp, till the production of the manufatto one in expanded polypropylene. A complete service "turnkey", in order to satisfy the requirements of the customers who need of a product "on measure" |
|
Folding plywood case made from 6-8 mm birch and 8 mm OSB
The base and lid are reinforced by a system of angles (on base and lid), as well as tongues around the rim.
The rim is available in 6 versions. |
|
| The FAMI metal stacking and storage containers are the perfect solution for storing and handling the material that must be easy to access both in the warehouses and in production and assembly departments. |
|
Insulated Rolls are particularly well suited to the food supply chain from warehouses to points-of-delivery or any other logistics networks with multi-destinations. Distribution is a very sensitive phase of the cold chain because of handling, loading and unloading and frequent door openings of the vehicle.
The insulated ROLL is a very flexible solution suited to most logistics organisation,
and ensuring perfect thermal safety throughout the cold chain :
- waiting on distribution centre docks and transport at ambient temperature.
- simultaneous transport of chilled, frozen and dry (food or non food) products.
- integration of frozen foodstuffs in a refrigerated chilled vehicle.
- waiting at point of delivery reception area before transfer to display or cold room.
Reliable and easy to use, the insulated ROLL is the perfect solution for distribution of temperature sensitive products.
In addition to having dimensions in accordance with standard transport sizes, the 100% plastic design meets all industrial requirements with performance exceeding ATP regulations. |
|
The insulated Bacs are designed for food and non food products requiring temperature control. The Bacs are in use in various fields of business e.g.
- farm-produce industry for packed or bulk products
- technical industries for very temperature sensitive products or low temperature
such as Dry Ice, frozen glue, fermenting agent...
- health care sector for the collect or distribution of very light loads under temperature control (blood samples, insulin, vaccines etc.)
OLIVO offer two ranges of manufacturing technologies: classical concept made of fibreglass/polyester, and the latest technology made of monobloc rotomoulded polyethylene.
The small capacity containers fit conveniently into any ordinary vehicle.
The large capacity containers are designed to be easily handled by forklift trucks.
All of them are stackable and can be fitted with castors.
The high insulation performance provides solutions for demanding thermal requirements.
|
|
Craemer’s high volume plastic containers for the storage and transportation of fluids and solids find their use in the food and non-food industry, as well as in their distribution. They are hygienic, easy to clean and have been a fixed component in the transport chain for many years.
As a rule they are made of high-quality unmixed HDPE. This choice of material in combination with Craemer’s claim to high quality is a guarantee for the durability and resilience of these containers. Several products such as the fish and shrimp crates, the mortar skip FMK or the transport and stacking crates are used mainly by the industries for which they were originally designed. On the other hand there are products such as universal containers, tubs, grit-bins and water butts which are used for a number of purposes in various industries. |
|
The container of your choice for transport, storage and order picking.
It is available in more than 250 variations.
When nested empty, »MB« containers save up to 75 % of their volume.
Smooth inner walls ensure a 100 % utilization of the volume and easy cleaning.
Comfortable handling due to generously spaced and ergonomically designed handgrips.
- large areas for prints and labels
- reduces packaging waste
- avoids unnecessary repacking
- designed for long life
- designed to minimise nesting volume
- conforms to Euro-sizes |
|
| For in-door/out-door storage of grit, sand, salt, Chemicals and spillage equipment • Optional extras: Logo service available, Plastic toggle. |
|
A PLACE FOR EVERYTHING AND EVERYTHING IN ITS PLACE
Do you want everything in its place and within reach? It’s child’s play with the Martini Alfredo systems for storeroom and office organisation and filing. The basic principle is modularity, so that you can rapidly build your own structures and expand them as the need arises. Drawer units, shelves and filing units – all made of resistant, shockproof materials – are designed to make the best possible use of the space available.
CHESTS OF DRAWERS ALFA MEC - This drawer unit is designed to hold small metal products, electronic components or pharmaceutical products. It comprises a broad external casing with hooks at the sides and drawers in six sizes, each with a pocket to hold an identification plate, which can also be used alone.
CHESTS OF DRAWERS BETA - The basic module (casing and drawer) of this drawer unit can be used to build walls and partitions for storerooms, workshops and points of sale.
CHESTS OF DRAWERS RHO KAPPA - This lightweight self-supporting drawer unit is
designed on the build-it-yourself principle for creating storeroom walls of any size. The drawers can be removed completely and stacked and are also available in a version resistant to oils, fats and solvents.
CHESTS OF DRAWERS MEMORIA - An external casing and a drawer with a dustproof cover for the basic module of this drawer unit. Perfect for filing and retrieving documents rapidly.
|
|
Stacking containers, series BN
accepts heavy loads
very hardwearing
proven durability and rigidity
available with a range of useful accessories
sizes compatible with Euro pallet
temperature resistant from -20 to +90°C |
|
DELTA CONTAINERS
DELTA 20, DELTA 21, DELTA 30 and DELTA 60. Stackable containers with side handles, suitable for small metal products and pharmaceuticals. Also available in non-toxic material for use with foodstuffs or in conductive material for electronic components. Accessories: trolley, lid, card-older and for DELTA 21 sealable sliding lid.
|
|
MULTIPLE USE CONTAINERS
MAXIMUM FLEXIBILITY FOR YOUR IDEAS. This extensive family of containers ensures maximum versatility in use, with ad hoc solutions for such specific requirements as handling and storing small metal products or precious objects. Plenty of different ideas guarantee optimised space usage; modular assembled elements made for easy transportation.
ALFA: Self-supporting multiple use containers for creating storage walls. Also useful in echanical workshops and on assembly lines. Made of shockproof resin and easily accessible through the manhole. Stackable, modular and available in an extensive range of formats. Models 5, 6 and 7 are available with a central partition (bis version) and 2 front tag holders.
Alfa 1,2,3 and 4 models can be rear hooked to a horizontal bar (rack).
|
|
Craemer’s high volume plastic containers for the storage and transportation of fluids and solids find their use in the food and non-food industry, as well as in their distribution.
They are hygienic, easy to clean and have been a fixed component in the transport chain for many years.
Craemer containers –products with a solution to any problem.
As a rule they are made of high-quality unmixed HDPE. This choice of material in combination with Craemer’s claim to high quality is a guarantee for the durability and resilience of these containers.
Several products such as the fish and shrimp crates, the mortar skip FMK or the transport and stacking crates are used mainly by the industries for which they were originally designed.
On the other hand there are products such as universal containers, tubs, grit-bins and water butts which are used for a number of purposes in various industries.
|
|
Advantages on a view:
Small charge carrier in the euro format
very robust container from polypropylene
been suitable for the employment in the automated small article camp
100%ige utilization of volume by closed side panels without grasp openings
optionally with anscharniertem lift-up lid, thereby dust proof lockably
3 ground variants: Standard ground, rib ground and double bottom |
|
View camp boxes:
The offer of our camp, Kommissionier and transport containers covers a high number of different types, remarks and sizes. Practice proximity and user oriented solutions are the basis for developing our various production program.
The development of our plastic boxes coined/shaped of the observation of the market, that the continuous development in the individual industries as well as discussions and requirements of our customers.
Our injection molds are a strong piece "High Tech ". Our entire production flow is characterized by a high degree of automation and flexibility.
Product introduction:
Optimal running properties by roughened ground and rounded off approach edges
High utilization of volume by right-angled corners and smooth surfaces
Captive window to open in the pile
High pile security by locking burls
Secure handling by grip recesses
Inclusive labels
Strengthens hollow-chamber sections for stabilization
9 models in 5 different Grungmaßen
Our products fulfill among other things following guidelines and standards:
DIN 16901 (tolerances)
EN 13117 (loads)
European Union guideline 2001/58 EEC (food fitness)
DIN 6120 (recycling) |
|
|
|
