Cutting edge milling cutters

Diameter : 10 mm - 40 mm

Cutter range 10-40 mm (0.375-1.500 inch) Max depth of cut 5 mm (0.197 inch) Recommended slotting depth of cut 3 mm (0.118 inch) Insert corner radii range 0.2-1.6 mm (0.008-0.063 inch)

... high machining performance. TANG-SFEED is available in three insert sizes: 05, 09, 14 mm and related cutters. The line is accentuated with the general purpose LPKU insert ...

Diameter : 4, 3, 25, 9, 45 mm

... supply delivers the coolant directly to the cutting edge. The three carbide cutting edges and three insert seats in the tool body are manufactured to ...

Diameter : 25 mm - 160 mm
Length: 40, 50, 63 mm

High-efficient shoulder milling cutter The SumiDual Mill DFC Type is a high-efficient shoulder milling cutter with double-sided 6-cornered inserts. Stable and reliable ...

Diameter : 40, 50, 52, 63, 80 mm
Length: 40, 50 mm

... line is expanding! With the XNKU 06 and XNKU 12, there are no limits for high feed machining of either small or large sized components. The 4 cutting edge negative insert ...

Diameter : 40 mm - 250 mm
Length: 52, 42 mm

... number of cutting edges and the service life. Each cutting edge is marked for ease of orientation and enables a high speed of installation. Exactly manufactured insert ...

... corresponding coating. Trochoidal milling is a very dynamic machining process, which manages an extremely high material removal rate when roughing to quickly mill a part that is close to its final ...

Diameter : 4 mm - 12 mm
Length: 60, 76, 84, 65 mm
Rotational speed: 8,000 rpm - 36,000 rpm

Peripherical cutting end mills with monocrystalline CVD cutter for high gloss or transparent finish. For acrylic (PMMA), SAN and other plastic materials. The PL-FL model is an extension of the PL-FI ...

Diameter : 50 mm - 250 mm

... / R1.2 / R1.6 / R2.0 / R2.5 / R3.0. Each insert has 4 cutting edges available. Convenient! Economical! Features Fully grinded G-grade insert. Insert has 4 effective ...

Diameter : 10 mm - 20 mm
Length: 80 mm - 165 mm

... formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the ...

Diameter : 3 mm - 20 mm
Length: 50 mm - 154 mm

Maximum Material Removal Rate Vibrations free Roughing and finishing with the same tool Excellent chips evacuation

Diameter : 6 mm - 31.75 mm

... for hand-held drilling of CFRP and hard composite/metallic stack materials Technical features PCD cutting edges: 2/3 Helix angle: 0° Cutting tolerance: +/- 0.05 Balance: G2.5 ...

Diameter : 2 mm - 4 mm
Length: 50 mm

BVREF RADIUS-CHAMFER. MILLING CUTTER FOR ENGRAVING FOR HARD MATERIALS Ø 2.0

Diameter : 3 mm - 8 mm

... dimensions are available per request. Telcon Diamond Ltd. is a world leading manufacturer of Diamond PCD and CVD cutting tools for the machining of composite materials: CFRP, GFRP, MMC, CMC and hard ...

Diameter : 12 mm
Length: 64 mm

... finishing tools are used when a smooth edge cut is required and is a popular tool design for most routing applications. The helical cutting edge reduces material contact while in the ...

Diameter : 50 mm - 125 mm

... stable The tough cutting edge increases productivity Excellent performance with improved thermal properties and MEGACOAT HARD Features End mill cutter is available, and face mill ...

Diameter : 18, 20, 22, 25 mm
Length: 80 mm - 130 mm

PCD shank cutter Z1, PCD tip H4, special steel body, plunge in PCD, axial cutting edge extreme (54,9°) for excellent finish panel. Suitable for working melamine,paper very thin, laminate ...

Diameter : 0.1 mm - 12 mm
Length: 40 mm - 110 mm

2 FLUTES NECK TYPE BALL ENDMILL Precise R tolerance on cutting edge ensures high precision machining High cutting edge strength by adopting the ...

Diameter : 19 mm
Length: 65 mm
Rotational speed: 28,000 rpm

... pass will serve to trim the edge leaving a slight protrusion and a second pass with the trimming cutter will finish your job. The milling cutters have 2 cuts in hard ...

Diameter : 2 mm - 40 mm
Length: 0 mm - 250 mm
Rotational speed: 100 rpm - 50,000 rpm

... K05, K10, K20, K30, K40 depending on the type of machined material MASAM chooses End Mills MASAM is possible to use for machining at least whole material groups under ISO classification – P,M,K,N,S,H DIN 6535 HA, ...

Diameter : 1.5 mm - 6 mm

... End Mills. Sharp cutting edge produces an excellent surface finish. Center Cutting. CNC qualified. Slow 20° Helix reduces workpiece lifting and creates a fine finish. Standard cutter ...

Diameter : 9.5 mm
Length: 44.5 mm

Mills CMT double cutting edge. They offer a nearly infinite range of possibilities of woodwork. They perform perfect cuts in plates, cabinet fronts, bevelled-edge, but also engrave. Like ...

Diameter : 3 mm - 20 mm
Length: 100, 75, 60, 50 mm

Product introduction ： HP-MAX Flat End Mill 4-Flute 35° Tool Materials ：Micro Grain Carbide Applicable Work Materia：NAK/HPM Application field ： Application industry covers automobile, motorcycle, engine, aerospace, military ...