|
|
Gear Shaving Cutters. Gleason manufactures
and resharpens precision shaving cutters to
support Gleason Hurth shaving machines and
any other gear shaving machines. The
Gleason shaving cutter design is optimized
for maximum tool life.
|
|
|
Dathan disc type cutters can be designed and produced for cutting any type of gear, internal or external, spur or helical. They can also be designed to cut splines, serrations, sprockets or other involute forms. The cutters are full form generated using the Dathan 'pass thro' method. These cutters may be manufactured with bore diameters from 10mm to 120mm or ½" up to 4", cutter diameters (pitch circle diameter) from .75"(19mm) to 10"(250mm) and can be manufactured to any world standard or to any specified requirement.
|
|
SHANK TYPE CUTTERS
These are primarily designed for cutting internal gears, splines and serrations, both spur and helical. May also be designed for externals if required. These cutters are full form generated however small the pitch circle diameter (PCD) although strength of the cutter produced is the limiting factor. The strength and rigidity of shank type cutters is greatly improved by the Dathan ribbing method and is especially advised for those of small PCD.
HUB TYPE CUTTERS
Dathan hub type cutters are designed for cutting internal components where maximum rigidity is required. Hub type cutters are recommended for cutting long face widths or for coarse pitches.
In general terms, any tooth form, face width or number of teeth that is available on a shank cutter, can be manufactured with a hub type fitting. Note: these cutters screw directly onto the spindle of the machine therefore rely on the spindle being in a good true state.
|
|
STRAIGHT BEVEL GENERATING TOOLS
These are produced for Gleason machines, 24", 18", 12", 11" ,6" and 3" both roughing and finishing and also for Heidenreich and Harbeck machines, 15KH, 25KH, 26KH, 60KH and 75KH. These are manufactured as standard in M2 HSS, though tools in 5% colbalt steel can be supplied to order.
|
|
Convert now to cutting reliability at higher speed
At Sandvik Hard Materials we regard the cutting function as a single system that forms an integral part of the converting line. Using Sandvik CRC (Carbide Rotary Cutters), your converting line will face no restrictions in the cutting function (up to 1800 pieces/min).
Sandvik CRC are designed on the basis of a powder metallurgy process. The resulting material is both harder and stiffer with superior thermal conductivity compared with steel which makes cemented carbide ideal for rotary cutters. It is possible to resharpen the cutters several times during their lifetime.
|
|
Gear Milling Cutters
- Gear Roughing Cutters
- Circular-type Gear Profile Cutters with Form Indexable Inserts
- Roughing Cutters for Rotors with Indexable Inserts
- Rotor Profile Cutters with Inserted Blades
|
|
| ... products without technical information |
| |
Manual shape cutting
The P is a lightweight manual ultrasonic device allowing easy shape cutting on any type of synthetic textiles and nonwovens. This handy cutter performs very clean cuts, eliminates frays and creates consistent and clean edges.
Manual straight cutting
The T is an easy-to-handle manual device performing straight cuts on any thermofusible fabric.
|
|
|
2-axis machine which you can program to run any contour or pattern for both welding and cutting applications.
|
|
We are pleased to present our newest cutter, the AutoCut X5. Driven by Servo motors, the X5 offers you significantly faster acceleration along with faster overall cutting speed, meaning greater efficiency and improved throughput for your company.
In fact, while our M3 model is still one of the best and most reliable machines available in the industry, our new X5 can cut up to 60% more in the same time! Repeatable accuracy is 0.02 inches.
A complete, turnkey system includes an integrated vacuum table, gantry and cutting head, and a friendly, easy to use hardware/ software interface.
|
|
| ... products without technical information |
| |
|
Rugged, reliable and powerful, Vemeer concrete cutters can be found working repair and replacement projects on streets and roadways worldwide. Vermeer concrete cutters are perfect for patch and joint placement on interstates, streets and highways. Other applications include cutting highway and bridge relief joints, creating lateral ditches for highway drainage, work on street and airport lighting projects, installation of airport guidance systems and demolition work for widening shoulders and airport pads.
|
|
|
|
|
|
RZ 111 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 110
Blade diameter mm 300 (350)
Engine HONDA Type GX 160
Max. engine power @ RPM kW 4,0/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 3600
Water tank capacity l 15
Water supply aqua spojka
Weight kg 55
RZ 120 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 120
Blade diameter mm 350
Engine HONDA Type GX 270
Max. engine power @ RPM kW 6,6/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 3400
Water tank capacity l 20
Water supply aqua spojka
Weight kg 95
RZ 121 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 120
Blade diameter mm 350
Engine HONDA Type GX 270
Max. engine power @ RPM kW 6,6/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 3400
Water tank capacity l 20
Water supply aqua spojka
Weight kg 72
RZ 170 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 170
Blade diameter mm 450
Engine HONDA Type GX 390
Max. engine power @ RPM kW 9,6/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 2800
Water tank capacity l 20
Water supply aqua spojka
Weight kg 106
RZ 171 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 170
Blade diameter mm 450
Engine HONDA Type GX 390
Max. engine power @ RPM kW 9,6/3600
Travel ruční
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 2800
Water tank capacity l 20
Water supply aqua spojka
Weight kg 78
|
|
|
Floor Saw Blades from TYROLIT and Floor Sawing Machines from TYROLIT Hydrostress - an unbeatable combination.
|
|
|
|
|
|
SHARK CUTTER SUCTION DREDGE
Dredging Supply Company's Shark Class Cutter Suction Dredge features a conventional dredge-operating configuration with modular design for ease of transportation. With standard discharge sizes ranging from 10-inch through 24-inch, our Shark dredges are most commonly used by sand & gravel producers and contractors. The tough yet portable design offers many rewards for the end user. With the proven reliability of the Shark Class cutter suction dredge, the end user can expect a very long life expectancy for this type of equipment. The Shark dredge will provide a high percentage of uptime and availability, which makes it one of the best selling models in the world!
DSC's Shark Class Dredge features standardized systems throughout all of the various sizes and configurations. The operating systems are all PLC based and offer the operator an ergonomic and user-friendly control panel. With the simple touch of a few switches, you are off and dredging. The Shark dredge also features power up/down spud systems with API rated winch drums for proper cable storage.
|
|
|
|
|
|
Features:
» Handling of two LVDT transducers, for continuous and interrupted surfaces gauging.
» Compact size.
» Bench and built-in versions.
» Application customisation by the user through the set-up of:
- Gauging formulas;
- Arms ratio for self-learning;
- Metric or British measurement units.
» Analogue indicator for the continuous measurement
display, with x1 and x10 automatic scale change.
» Digital I/O, SINK or SOURCE type, for the connection to CNC/PLC.
» The operator's panel provided with sensitive waterproof sandwich keyboard allows:
- Setting the three gauging thresholds for the output contact;
- Setting the delay of cycle start input contact and zero quota output contact;
- Setting the zero correction value (offset);
- Selection of the reading of individual transducers for the mechanical manual zeroing;
- Measure electronic, manual and automatic zeroing.
» Memory and LEDs test performed at start-up.
Advantages:
» Accurate.
» Simply to configure and to programme.
» Can be integrated in any architecture both in a new machine or in an already operating machine.
» Comfortable to use.
» Tough and reliable.
» Affordable.
|
|
Features:
Overall dimension: 20x40x76 mm.
Measuring range: up to 12,5 mm
Repeatability: < 0,05 µm.
Connection to the electronics through cables long up to 30 m
Memory chip for process optimization.
Pneumatic recoil.
Quick manual retooling of the fingers.
Wide range of fixed or manually adjustable supports.
Fingers available with breakaway pin.
Advantages:
COMPATIBILITY
Fits all measurement applications related to:
- diameter
- position
on new or operating machines
No limits of installation due to the loss of the signal.
ACCURACY
Within the measuring range:
- sub micron, through automatic calibration on the master for every measure.
- micron, through automatic calibration on one master only for all measures.
PRODUCTIVITY
No manual retooling within the measuring range.
Quick manual retooling for adjustment to a new family of pieces.
Prevention from machine breakdown due to accidental impacts.
|
|
Features:
Resolution: 0.1 µm
Linearity: +/- 1 µm (Diameter)
Linearity: +/- 0.5 µm (Position)
Standard gauge fingers for measure of diameters from 5 mm to 90 mm.
Watertight.
Measure of smooth or interrupted surfaces.
Gauge slides driven by air or oil.
Fine adjustment on slide.
Wearproof fulcrums.
Advantages:
Accurate.
Sturdy, suitable for installation on grinders.
Fits pre-, in-, and post-process applications.
Quick set-up and retooling.
|
|
PART AND TOOL MEASUREMENT APPLICATIONS ON CUTTING MACHINE TOOLS.
Automatic on-machine gauging of workpiece allows time saving in part coordinates setting as well as to detect in real time the result of your machining. Spindle and turret probing systems, provided with several types of wireless transmission systems (radio, infrared, high frequency) are available for this purpose.
Tool setting on lathes and machining centers are provided with dedicated probing solutions, both for automatic and semi-automatic cycles.
Non-contact laser tool checking is also available for tool breakage, tool integrity and tool profile measurement on milling machines and machining centers.
|
|
|
The highly polished open flute not only allows for easier chip formation and evacuation, but also provides for a sharper cutting edge that delivers a better edge finish on a variety of materials. Our premium micro grain carbide allows for superb wear resistance and tool strength. Special point geometry contributes to improved bottom finish and plunging capabilities. Tools are available in upcut and downcut versions from 1/16" through 3/8" diameters.
|
|
Onsrud is proud to announce the launch of our NEW taper tools. These cutters are made of premium micro-grain carbide and are available in a variety of sizes, lengths, and angles.
The tools are available with a ball nose tip giving them the flexibility to cut draft angles in molds to 3D decorative profiles. The cutting geometry will allow them to cut a variety of materials and produce a good edge finish.
Custom tools can be made upon request.
Material: Wood, Plastic, Aluminum
|
|
|
Double E offers core cutters in manual, semi-automatic and fully automatic models. Each model cuts cores efficiently and quietly without creating sawdust. The machines accept cores with diameters ranging from 38 mm (1.5") to 200 mm (8"), and wall thickness up to 20 mm (.75"). A simple and quick modification allows the machine to switch between various core ID’s.
|
|
|
It represents an ideal equipment for the agglomeration, granulation and mixing of food, chemical and pharmaceutical powders. It is successfully used in the additivation ( flavouring, colouring, etc.) and encapsulation of mixtures or powdery products thanks to the proved uniformity and homogeneity of its fluid-bed process. Its use is suitable for thermosensitive products. It is available in several construction materials.
|
|
OYSTAR Hüttlin fluid bed systems have a modular design. The base devices are designed as heavy-duty 10 bar or 12 bar excess pressure lines and can be adjusted using various different options.
Depending on the application required the Oystar Hüttlin fluid bed system can be configurated as:
HD Hüttlin dryer
HDG Hüttlin dryer granulator
HDGC Hüttlin dryer granulator coater
OYSTAR Hüttlin concept solutions mark a clear move away from the conventional technology of the past almost 40 years. The different detailed solutions such as the Diskjet, the spraying system, the dynamic filter and the gas analysis for organic processes involve major process advantages that greatly benefit the user.
|
|
|
|