|
|
|
|
|
|
FETTE′s compacting tools are differentiated through the following norming termini, EU „B“ (EU19/TSM19) and EU „D“ (EU1“/TSM1“). Additionally FETTE can provide the self-developed shape for the punch head EU1“-441 as a standard material. In the meantime nearly all customers ask for this type of tooling with its obvios benefits:
* longer pressure holding time
* higher yield
* less vibration
* less wear on machine and tooling
* lower sound emission
Tools that are not in compliance withe the obove mentioned standards, like the EU45 punches, primarily used for cleaning detergents, are also part of the portfolio.
The highest priority lies on the self-obliged level of quailty FETTE is standing for. Finding its result in the narrow fieds of tolerance choosen, as considered in the TSM-Manual or in the DIN-ISO 18084. A perfect match between the machine and the tooling is the undoubteble advantage of this package:
* longer lifetime of the tooling
* longer lifetime of machine parts
* less maintenance
* shorter unproductive times
* optimised lubrication
* reduced cost for spare parts
|
|
Holemaking tools
Punching tools and sets
Mechanical punching tools
Hydraulic punching tools
Knockout punch sets
|
|
Tool and die blanks made by CERATIZIT
At CERATIZIT we consider the carbide business a matter of confidence. Business based on confidence is a very healthy one. Decades of experience in carbide development and production enable us to offer this to you.
To meet the very high demands of the tool and die industry, CERATIZIT offers carbide grades especially developed for stamping applications. Application consultancy regarding grade selection, machining, and properties of different grades is just part of our service for you.
Product range
* EDM blocks
* blanks for punches
* die bushes
* rods
|
|
3 ranges of punch-dies for the most varied applications :
- Standard range
- "Washer cut" range
- Stainless steel range
|
|
Other cutting tools
Sheet metal
Diameter in mm : 12,7
Characteristics 1 : Model with 3 cutting edges for a more precise cut, avoiding distortion of the sheet - Characteristics 2 : Punches 1/2" (12,7mm) to 1 3/8" (35mm) with a fine screw pitch thread to reduce working effort. - Uses : Designed for quick and clean hole forming from 1/2 "(12,7 mm) to 3" (75 mm), in sheets of steel, non ferrous metrals and plastics.
|
|
Clutch capacities to:
516,000 lb·in
58.260 N·m
Brake capacities to:
336,200 lb·in
37.960 N·m
Airflex FSPA packages feature drum type CB or VC air applied clutches fastened to standard bearing-mounted flywheels. These clutch/flywheel assemblies are then combined with drum type CS and CTE or disc type DBA spring-applied, air released brakes. Although designed primarily for punch press use, they have found application on all types of cyclic equipment. Airflex press controls feature two independent circuits electrically interlocked and monitored to provide two-hand protection.
|
|
Like the punches we also offer the dies according to the european standard specifications. Therefore we offer our standard dies with the external diameters 22,0mm, 24,0mm, 30,16mm and 38,10mm. In order to satisfy the wishes of all our customers, we also produce special dies, fitting for example in older tablet presses or being used for special products, such as washing tablets.
To meet the demands of all our customers we use different materials for our dies and offer a numerous spectrum of materials, such as ceramics, stainless steel or hard metal. We also offer dies with different coatings, for example TIN–coating. The coatings increase the hardness of the dies and are ideal for the pressing of abrasive products.
|
|
Hole Punch Cylinders
Designed to punch millions of holes in plastic or other thin sheet materials 2 to 3 mils thick, the long-life BIMBA Pneumatic Hole Puncher will give you more cycles per penny.
The hardened steel cutter with ground razor sharp edges is an integral part of the cylinder. A small air jet ejects the slugs from the cutter preventing slug build up, and Elastomer Bumpers insure cushion quiet operation.
Less than 1" in diameter, several cylinders can be closely mounted. Available in seven hole cutter sizes from 1 / 4 " to 5 / 8".
This stainless steel body, single acting spring return cylinder has a 3 / 4" bore and 1" stroke. A nickel plated steel rod guide is threaded for easy nose mounting, and a 1 / 8" NPT air inlet is conveniently located in the rear head.
Prelubricated with HT-99, the cylinder can be operated with ordinary shop air at pressures up to 250 psi.
|
|
|
|
