|
|
* Tiny - 2.00" x 1.54" x 1.50" (100 deg.)
* Many options in tiny space
* No Backlash at end of stroke
* Long Life
* "Sanitary unit" - easy to clean
Plenty of torque - 9 in. lb. @ 80 psi
Strong shaft & bearings - 40 lb. radial, 30 lb. thrust
Accessible magnetic switches for position sense
|
|
|
AGI's pneumatic actuator, powered feed-escapement is ideal for individual release of parts from hoppers, conveyors, vibratory feeder bowls, tracks and magazines. These compact long stroke Linear actuators escapements are internally sequenced. The cross porting makes sure both rods are extended before either rod can retract ensuring positive part feeding. The AGI escapements have an easy part clearing feature due to internal back pressure cross port design, allows both rods to be retracted with air pressure off.
|
|
Spring return or double acting, anodized aluminum, quarter turn, rack and pinion actuator.
|
|
Pneumatic actuator Positioner 0,2-1 bar (AP)
In option:
Version ATEX category 1 (zone 0) with detectors of ends of the road and reader of angle
or ATEX category 2 (zone 1) with detectors of ends of the road and converter 4-20 my
Assembly:
- Direct Assembly on the actuators models 05 to 14.
The unit obtained comprises neither pipe, neither external electric wire nor mechanical drive: ideal for a precise positioning and without play.
- Universal Version with adaptation for actuators models 16 - 18 and 20
- Universal Version with male exit square (standard Kinetrol) or interfaces VDI/VDE 3845 Namur for assembly with adaptation on any other actuator or any other application ¼ turn.
Identification:
- Symmetrical parallelepipedic Form
- Entered of pilot air and driving air on the same frontage
|
|
Modular concept of assembly of elements of automation without interfaces (direct assembly) 208 combinations.
Possible indirect assembly: plan, interface and provided screws and bolts.
Reduction of study and maintenance.
Effective, simple, economic.
|
|
MSC, ZSC and MSN elements of the Easy-2-Combine.Dia range. 6 with 25mm, standard races 10 with 200mm.
Ideal solution for the projects of automation and assembly.
Optimization of the guidance and the sweeping force.
Easy maintenance.
|
|
Metal Work offer a complete range of actuators of various types; the standard series of cylinders is completed by a large range of different executions are available to satisfy all the automation needs.
All versions are equipped with NBR or PU seals and come in various options (materials and treatment) to meet all applications requirements.
A complete range of accessories make Metal Work actuators totally flexible, whilst allowing accurate positioning and speed control, even in heavy duty conditions. Hall, Reed or electronic sensors are available for the entire range for direct interfacing with control units.
|
|
TORK Rotary Pneumatic Actuators T-RPA Series;
TORK Valve Actuators are manufactured with CNC machines.
working systems of actuator is dual piston rack and pinion type rotary actuator.
one compact design for both double and single acting models,high cycle life.
according to international standarts ;Namur & ISO 5211.
Double acting type pneumatic rotary actuators : TORK T-RPA.....DA Serie
Single acting type pneumatic rotary actuators : TORK T-RPA....SR serie
3 position pneumatic rotary actuators :TORK T-RPA.....3P serie
180 degree pneumatic rotary actuators :TORK T-RPA.. ..8D serie
Tork value of TORK rotary actuators : from 11Nm ... up to 2900Nm
constant torque on all models.
Order types of TORK rotary actuators :T-RPA32.............T-RPA400
Certificates of TORK rotary actuators:TSE,CE,ISO9001:2000,LOYD,Ex,GOST,UKSEPRO
Strok adjustment : two side external travel stop adjustment +5 , -5 degree
|
|
|
A compact air cylinder functions in the same manner as a basic air cylinder with both single and double acting, single or double rod, and non-rotating models. However, SMC compact cylinders minimize space requirements by allowing for precise, direct mounting in the least amount of space possible.
|
|
|
|
|
|
DLB-B/L - DirectConnect Internally Powered Base Slide
These highly configurable internally powered linear base slides reduce the mounting footprint over externally powered slides by up to 50%. They are available in multiple strokes & sizes. DIRECTCONNECT mounting makes assembling these units together a snap.
- Bulit-in repairable cylinder
- Compact for extremely small spaces (-B)
- Longer strokes in Compact Space Saving Package (-L)
- Features DIRECTCONNECT mounting
RFE - Feed Escapement
The RFE series of feed escapements offer failsafe locking fingers, sealed design to prevent internal component wear, and built-in sensor mounting slots. They are the most effective mechanism for separating components fed from a track or conveyor.
- Finger locking mechanism ensures that only one finger can be retracted at one time for proper part feeding
- Square shaft prevents shaft from rotating
- Unit can be mounted using top, bottom, or face surface
DLM - Mini Ball Rail Slides
- Up to 8 position sensing available.
- Recirculating Double Bearing Option
- Adjustable Precision Stops
- High Temperature Viton Seal Option Available.
DMM - DirectConnect Slide Mounting Modules
These pre-engineered mounting modules are designed to provide a simple and sturdy solution for mounting DIRECTCONNECT Base Slides and Thrusters. Select from 10 different design styles in 3 sizes. Simply specify style, beam size, and basic dimensions.
- Simple and sturdy solution for mounting DirectConnect base slides and thrusters
- Pre-engineered designs save you time and money
- Individual components allow you to design your own modules
- Customize with add-on kits and accessories
|
|
Linear Thrusters Pneu-Moment
For smooth, guided motion. A durable housing with guide shafts keeps our Linear Thruster from rotating and allows it to carry higher loads. Choose from two different models. A choice of stroke lengths and a wide variety of catalog options make the Bimba Linear Thrusters easy to use and ready to order.
The Benefits of the Linear Thrusters Pneu-Moment Include:
Bimba stainless steel body air cylinders for long, reliable life
Optional magnetic piston for use with Hall Effect or Magnetic Reed Switches
Optional adjustable cushions for smooth deceleration of load at end of stroke
Optional internal or external bumpers to absorb shock or adjust stroke
Easily accessible ports
|
|
|
High load weight vs extension. Five bore sizes from 3/4" (20mm) to 2" (50mm). Stroke lengths up to 12" (305mm), Base or side mount. Linear ball or composite bearings. Options include switches, shock absorbers, stop collars and bumpers.
|
|
|
|
|
|
Rotary Vane Pneumatic Actuators
Features
·Torque output of 16 to 1000 Inch Pounds
· Adjustable Rotations
· Reed and Hall effect switches
· Only one moving part
· Non Lube service
· Low cost solution
·Heavy Duty Double Acting Ball Valve Systems
Valve sizes from ¼” to 3”
140 in.lbs to 800 in.lbs
· Spring Return Valve operators
Single acting with spring close or open
Valve Operator Systems
·
·Spring Return operators are formed by bolting a spring return unit to a double acting Val-U-Act operator. The return movement is effected by a clock-type spring which is pretensioned to about half the operator torque. The amount of pretention is large, compared to the rotation and therefore the torque does not vary more than 20% over the rotation.
Spring returns are factory-installed and adjusted. The spring returns have a worm drive adjustment for setting or changing spring pretension. By inserting a socket key into one end of the worm the spring pretension can be very easily increased or decreased to suit operating conditions. To increase pretension, turn the worm clockwise; to decrease, turn counterclockwise.
|
|
|
AGI offers a full line of pneumatic rotary actuators. All rotary actuators are rack and pinion design and incorporate output flange hard stop. The hardstops stops the output flange directly so there isn't any pinion breakage. The units are ultra hi torque pneumatic actuators due to cross porting the two piston bores. The extremely low profile package is excellent in tight space applications. There are five sizes available with manifold and mid stop options. Torque output ranges from 7in-lbs. to 310 in-lbs. @ 100 psi.
|
|
HRAPS
Rotary actuator-piston type offers maximum space saving, easy piping. Rotation from 90 degrees toa full 360 degrees. Ultra compact sensor switch can be used. Double rack system offers no backlash and no leak construction. Slim, compact body. One end porting allows greater space saving. Double rod model available.
|
|
Simple Design
Low maintenance, best dollar to torque output ratios available.
Single Moving Vane with a Fixed Seal
Simple and reliable design means less maintenance no hysteresis and extremely long life.
Patented Tri-Seal Design
Tri-Seal seals the output shaft, body halves and vane with a single molded polyurethane component. Reduce costs and lead time.
Pressure Assisted Seals
Sealing is inherently self compensating for wear because the air pressure creates the seal.
No Load Full Stroke Operation with Less Than 3 PSI Air Supply
Low friction means that almost all the plant air to the actuator is being utilized to operate the valve instead of overcoming the friction in the actuator. Puretorq vane type actuator is excellent for modulating applications.
Dual Output Female Drives Together with Dual ISO Mounting Pad
|
|
1 An uncontrolled reset stroke can cause some bounce of the rack and a small forward impluse to the shaft. It will be apparent only if the shaft load is small, with low friction. It can be reduced by a bumper (usable on reset cylinder only) or more by a correctly adjusted cushion
2. Switch mounts by strap to cylinder, place as required for access and signal phasing R (sink) or S (Source) switches only.
|
|
RR-Heavy Duty - Flange Output Rotary Actuator
This heavy-duty rotary actuator is ideal for payloads up to 200 lbs [91Kg] in weight. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional shocks/stops, mid-stop and rotary manifold available.
1. Low profile and bearing supported turn table provides an extremely compact package for tight space applications
2. Payload can be connected directly to the turn table. Eliminates the need for a bearing block
3. Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
4. Air manifold option eliminates twisted airlines
|
|
|
|
|
|
DRF - Flange Output Rotary Actuator
These new DIRECTCONNECT, flange mount rotary actuators, allow the payload inertia to stop directly through an independent hard stop mounted in the turntable, rather than through the drive mechanism.
- Infinitely adjustable within rotation range
- Dual bearing flange support
- Magneto-resistive sensing
- Adjustable hard stops
RR-Light Duty - Flange Output Rotary Actuator
This small, compact and lightweight rotary actuator is ideal for payloads up to 3 lbs [1.3Kg]. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional sealed flange or sealed flange with corrosion resistant hardware available.
- Low profile and bearing supported turn table provides an extremely compact package for tight space applications
- Payload can be connected directly to the turn table. Eliminates the need for a bearing block
- Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
- Air manifold option eliminates twisted airlines
RR-Heavy Duty - Flange Output Rotary Actuator
This heavy-duty rotary actuator is ideal for payloads up to 200 lbs [91Kg] in weight. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional shocks/stops, mid-stop and rotary manifold available.
- Low profile and bearing supported turn table provides an extremely compact package for tight space applications
- Payload can be connected directly to the turn table. Eliminates the need for a bearing block
- Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
- Air manifold option eliminates twisted airlines
|
|
R Series Rack and Pinion Style Rotary Actuator
The R Series is a heavy-duty rack and pinion style rotary actuator that is designed to excel in the most rigid applications. The R Series includes a high torque-to-size ratio as well as accurate positioning.
RW Series Rotary Actuator
The RW Series Rotary Actuator design utilizes two independent piston cylinders, each piston has a crank arm attached to a crankshaft. As the piston strokes in its bore, the crankshaft rotates, pressurizing the opposite bore reverses rotation. This unique design has many features and benefits over conventional rotary actuators.
LR Series Low Profile Rotary Actuator
The LR Series rotary actuator is a low profile rack and pinion design. Two independent pistons drive their corresponding racks against the pinion thereby rotating the platform.
|
|
PRO-PRN ROTARY ACTUATORS
Full range of 9 sizes available
Non-lube intermittent use
Single or double vanes types
PRN High torque versions
Suitable for Process, packaging and electronics industry's applications
RA SERIES ROTARY ACTUATOR
Rack and Pinion type - RA
90° or 180° Rotation
Shaft with key
Uniform high torque in both directions
P1V-P, RADIAL PISTON AIR MOTORS
P1V-P piston motor
Power 0,73 kW, 0,125kW and 0,228kW
Low speed and high torque
Available as base and brake motors
Very low noise level
Free speed from 2200 down to 7,4 rpm
High torque from 0,637Nm up to 500Nm
No wear parts necessary if supplied with oil mist
P1V-A LARGE AIR MOTORS
Designed for arduous applications
Non-lube intermittent use
External seal viton
Wide product range
Suitable for Food Industry applications
|
|
|
SMC manufactures two of the most common types of rotary actuators: Rack and Pinion and Vane style. In addition, we offer Combination models combining compact cylinders with rotation and rotary gripper combinations. When the application calls for rotational motion less than one revolution, rotary actuators can mount right at the equipment joint without taking up space with long stroke lengths, which would be required to do the same job with a linear cylinder. SMC's rotary actuators can achieve arc lengths of 90, 180, 190, or even 270 degrees, depending on the configuration.
|
|
1. Rotary options available are the same as A01
2. Stop tubes are available to stabilize the extended shaft Standard lengths ate V and r, add 10 unit height Sleeves tor switch magnets serve the same function.
3. Needle VelVK see page 15.
|
|
RCM, RAN, RAP and RWT. Swing angles:
90,100,180,190,270,275,360° and indexable.
Precise positioning. Many possibilities of fixings. Assembly simple and fast of the parts to be added specific to the customers.
|
|
|
|
|
|
DRF - Flange Output Rotary Actuator
These new DIRECTCONNECT, flange mount rotary actuators, allow the payload inertia to stop directly through an independent hard stop mounted in the turntable, rather than through the drive mechanism.
Infinitely adjustable within rotation range
Dual bearing flange support
Magneto-resistive sensing
Adjustable hard stops
DRG - Shaft Output Rotary Actuator Series
These new DIRECTCONNECT, shaft mount rotary actuators, are an excellent choice for diverter gates, escapements and ejection stations where low precision end stop positioning and backlash are acceptable.
Infinitely adjustable within rotation range
Multiple mounting locations
Highly configurable. Multiple options
Features DIRECTCONNECT mounting
RR-Medium Duty - Flange Output Rotary Actuator
This medium-duty rotary actuator is ideal for payloads up to 15 lbs [6.8Kg] in weight. They are available in standard 45, 90, 135 or 180 degrees of rotation. Optional mid-stop and rotary manifold available.
Low profile and bearing supported turn table provides an extremely compact package for tight space applications
Payload can be connected directly to the turn table. Eliminates the need for a bearing block
Zero backlash, preloaded ball bearings, and slip fit dowel pins make this a very precise and repeatable rotary actuator
Air manifold option eliminates twiisted airlines
|
|
Multi Act’s integrated motion actuators have an output shaft which produces both linear and rotary motions may be operated independently and simultaneously. Multi-act is available in three family sizes.
MAO series – Miniature series
Linear: Strokes 1, 2 and 4 inches, Force 100 pounds at 100 psi
Rotary: Rotations 0 deg to 90 deg and 0 deg to 270 deg
Torques 25 to 50 inch pounds at 100 psi
MA-1 Series – Heavy duty series
Linear: Strokes 2,4,6,9 and 12 inches
Force 440 pounds at 100 psi
Rotary: Rotations 0 deg to 90 deg and 0 deg to 270 deg
Torques 150 to 600 inch pounds at 100 psi
MA2 Series - Brute Force Series
Linear: Strokes 4 and 8 inches
Force 1900 pounds at 100 psi
Rotary: Rotations 0 deg to 110 deg and 0 deg to 290 deg
Torques 1800 to 3600 inch pounds at 100 psi
|
|
ASCO/JOUCOMATIC offers a wide range of standardized (AFNOR NF E 49-004 / ISO 6432, 6431,15552 / CETOP / VDMA/ CNOMO) and non-standardized cylinders.
These pneumatic cylinders can be equipped with a lock, a guide unit or other equipment. Their applications lie in sectors of activity using automated processes, such as the automotive industry, conditioning, assembly, handling, etc...
|
|
THREE POSITION ACTUATOR
• Mounting and layout dimensions are like standard dual rack unit of same rotation.
{i.e. 90-0-90 degree unit dimensionally like 180-degree standard unit)
• Stop tubes are installed in left cylinders. Magnetic switches to sense central position should also be installed on the left cylinders.
• Generally, torque is equal to the single rack unit of same size; other ratings as for dual rack unit.
• For plumbing diagram click on user guide.
|
|
THREE POSITION ACTUATOR
• Mounting and layout dimensions are like standard dual rack unit of same rotation.
(i.e. 90-0-90 degree unit dimensionally like 180-degree standard unit)
• Stop tubes are installed in left cylinders. Magnetic switches to sense central position should also be installed on the left cylinders.
• Generally, torque is equal to the single rack unit of same size; other ratings as for dual rack unit.
• For plumbing diagram click on user guide.
|
|
THREE POSITION ACTUATOR
• Mounting and layout dimensions are like standard dual rack unit of same rotation.(i.e. 90-0-90 degree unit dimensionally like 180-degree standard unit)
• Stop tubes are installed in left cylinders. Magnetic switches to sense central position should also be installed on the left cylinders.
• Generally, torque is equal to the single rack unit of same size; other ratings as for dual rack unit.
|
|
|
|
