Force: 3000, 6000 N
Speed: 0.06, 0.03 m/s
TA5P features a single-piece aluminum design which is advantageous compared to the TA5. It is well suited to lifting applications such as recliners and lift chairs. In extended slide lenghts, it can be ...
Force: 4000, 6000 N
Speed: 0 m/s - 0.02 m/s
... line of linear actuators manufactured by Ti Motion. The unit is suitable for use in lifting applications, such as recliner or lifting chair. It is mainly applications ...
Stroke : 20 µm - 1000 µm
Force: 0 N - 3500 N
Speed: 0 m/s - 0.01 m/s
... amongst our medical actuator solutions that is suitable for tight installation space, such as X-ray machine as well as monitor machine for medical use. Moreover, TA16 has a perfect solution ...
Stroke : 50 mm - 300 mm
Speed: 0.15 m/s - 0.6 m/s
EAC Series Electric cylinders with absolute sensor with/without integrated controller Linear slide size: 28 mm x 28 mm - 60 mm x 156 mm Drive method: ball screw Stroke: 50-300 mm Pushing force: 40-500 N Thrust force: ...
Stroke : 17 mm - 30 mm
The cylinders described in this page are operated by a vacuum, while the creation of a vacuum in the cylinder front chamber, connected to the piston, overcomes the opposing spring force. In addition, ...
Stroke : 5 mm - 100 mm
... acting cylinder with circular profile end cap. The standard and magnetic version is available and the radial rear mounting (type CT1) or in line rear mounting (type CT2) is also available. Its bore sizes are 50 mm, ...
Stroke : 10 µm - 1005 µm
Force: 3000 N - 6200 N
The LZ 80 is a heavy-duty cylinder engineered by RK. It is suitable for use in industrial applications. The unit features a compressive and tensile force capacity of 10000 N. It is ...
Stroke : 50, 100 mm
Force: 600, 720 N
The HZ is a series of lifting cylinders manufactured by Zimmer Group. The series features a hoseless air passage that boosts safety through removing the undefined interference contours ...
Stroke : 10 mm - 150 mm
Force: 100 N - 950 N
Speed: 0.1 m/s - 0.6 m/s
AVM type 31 integrated double acting cylinder is available in diameters ranging from 20 to 50 mm. It has an accurate and robust guide. It is highly resistant to radial load of conveyor thrust. The cylinder ...
Stroke : 200 mm - 300 mm
Force: 0 N - 540 N
Speed: 0 m/s - 0.04 m/s
... and BAR Series products are linear actuators that are computer controlled. LAR Series actuators are lead screw driven with precision and the BAR ones are ball screw driven. Different lengths of travel are available along ...
Stroke : 50 mm
... easy-to-handle compact low height hydraulic cylinders with limited closed height. Ideal for pushing and levelling operations in confined areas. Widely used in industrial assemblies and ...
Stroke : 10 mm - 15 mm
... are high pressure extra flat hydraulic cylinders with extremely reduced closed height, ideal for working in narrow spaces where it would be impossible to use other cylinders. http://www.fpt-worldwide.com/en/products/extra-flat-hydraulic-cylinders-high-pressure ...
Stroke : 50 mm - 150 mm
... Light weight high pressure cylinders that are easy to carry and very easy to handle. Used in applications in which reduced weight is an important factor. http://www.fpt-worldwide.com/en/products/lightweight-aluminum-hydraulic-cylinders/
Stroke : 75 mm - 150 mm
CRM TRA-TR Series are pull hydraulic cylinders that operate under a pulling force. Ideal for load approach and welding operations in the shipbuilding and heavy structural steelwork sectors. ...
Stroke : 15 mm - 300 mm
High Tonnage – heavy lifting – gravity return cylinders. • Single acting hydraulic cylinders with load return for heavy lifting. Designed for industrial ...
Stroke : 25, 40, 50, 17, 30 mm
These items use lifting cylinders for lifting and stacking a great variety of flat workpieces (including veneers, wood, glass, metal sheets and others). The separating sheets of plastic ...
Stroke : 25 mm - 300 mm
Force: 150 N - 1000 N
Speed: 0.01 m/s - 0.04 m/s
Voltage: 12 V or 24 V Current max.: on 12V about 3 A - an 24V about 1,5 A Load push: 1.000 N Load pull: 1.000 N static Load: 2.000 N to i=40 (gear ratio) Stroke: 25 - 300 mm Speed: 6 - 45 mm/s Duty cycle: 25% Limit ...
Stroke : 700 mm
Lift and tilt cylinders are used in all fields of application for functions such as lifting and lowering, opening and closing.
Stroke : 0 mm - 300 mm
Force: 1380 kN
Capacity from 140 to 1.100 Tn, stroke up to 300 mm. Load return. For weighing, lifting and positioning applications in Civil Engineering. Hydraulic end of stroke overflow ...
Stroke : 0 mm - 300 mm
Force: 20 kN - 1714 kN
Capacity from 10 to 550 Tn, stroke up to 300 mm. For push and pull applications. For heavy duty applications, high precision and involving high cycle life. ...
Stroke : 0 mm - 300 mm
Force: 486 kN
... Optional tilting saddles. On request, DDR cylinders can be supplied with threads or other special features such as lock nuts, sleeves, etc. Possibility of up to 2.000 Tn lifting capacity per cylinder
Stroke : 1.1 m - 3.6 m
Force: 0 N - 5000 N
The "Take Off" prop is an innovating prop with a great expansion and load bearing capacity : an ergonomic tool exclusively designed for horizontal formworks (slab formwork to be cast in place).
Stroke : 25 mm - 1500 mm
... switches on 4 tie-rods. With an ability to perform various manoeuvres ? flipping, clamping, lifting, transportation and turning ? the MB-Z is ideal for general industrial equipment. And with a choice ...
Stroke : 25 mm - 200 mm
Speed: 0.05 m/s - 0.5 m/s
... alternative round switches that can go right on the cylinder. This is useful for when you've got large amounts of work to manage. There are three mounting options to use as well. This can idealistically ...
Stroke : 50 mm - 300 mm
Single-Acting, Gravity-Return CylindersOur high tonnage hydraulic cylinders are designed to provide superior durability and side-load (eccentric load) protection Hardened surface resists side-loading ...
Stroke : 57 mm - 1219 mm
Force: 101000 N - 5108000 N
The RR series includes Enerpac double-acting cylinders that are designed for use in high-cycle industries while being rugged at the same time for the harshest job sites. Base mounting holes, plunger threads and collar ...
Stroke : 5 mm - 200 mm
Torque: 3 Nm - 15 Nm
... fitted directly onto the cylinder. Ideal for the transfer of large work pieces and those with eccentric loads, the MGPW has three types of bearing and mounting options as standard and can manage several ...
Stroke : 75 mm - 1300 mm
Speed: 0.05 m/s - 1 m/s
... pushing, lifting, and stopping. Which combines its capabilities for a linear motion guide of a conventional cylinder, and non-rotation device. Given the fact that it has features which makes it reliable ...
Stroke : 6 mm
The HVL pancake cylinder range combines a very low closed height with a 6mm stroke, providing a precise adjusting and lifting force in very confined work areas. Ideally suited for applications ...
Stroke : 152 mm
... rod and cylinder body and a steel cylinder base protection plate. Available lifting capacities range from 32 to 110 tonnes capacity, at maximum working pressure of 700 Bar. All models ...
Stroke : 100 mm
Force: 2513 kN
CX-series cylinder with 220 (256*) ton lifting capacity. It is specifically designed to withstand off-center loads and is equipped with extra large, unique, piston guides. 220 (256*) ton capacity and ...
Stroke : 5 mm - 40 mm
Force: 3 N - 50 N
Also called lifting vacuum cups or integral lifting vacuum cups, FIPA offers various models of lifting cylinders operated with compressed air or vacuum. ...