|
|
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
InfoLink® is a wireless fleet management system that monitors and communicates a wide range of essential fleet truck usage and performance information. Each truck is in continuous communication with the management team offering information on location, performance, operator productivity, unauthorised use and maintenance requirements.
InfoLink can be run on existing 802.11 Wireless LAN systems, eliminating the need for an expensive new data transmission set-up. All data is transmitted in real time to ensure immediacy of information.
The use of InfoLink will result in better decisions on fleet management. Companies and organisations can uncover accurate facts and performance on shift-working patterns that were previously much harder to define. Detailed reports provide insights into equipment use based on actual processes and functions.
InfoLink is another example of Crown’s commitment to delivering superior value at the lowest cost of ownership.
|
|
|
|
|
|
Off-line fuel monitor СКРТ 31 Lite is designed for data logging and displaying vehicle operational data, fuel monitoring and vehicle route tracking (option). Collected data are stored in non-volatile memory of the off-line fuel monitor CKPT 31 Lite.
Off-line fuel monitor CKPT 31 Lite is mounted on the dashboard in the driver’s cab. The controlled parameters can be displayed and checked either on the screen of the off-line fuel monitor on-board the vehicle or using an external personal computer. Standard sensors (speed sensor, engine speed sensor, ignition key position sensor) and additional sensors (fuel flow sensor DPT, fuel level sensor DUT-E) can be connected to the off-line fuel monitor CKPT 31 Lite.
In order to perform subsequent automatic data processing and detailed data analysis in the office Software “CKPT-Manager” is used.
Controlled parameters of CKPT 31 Lite:
- Fuel consumption
- Fuel level in tank
- Fueling volume and time
- Fuel discharge volume and time
- Traveled distance
- Traveling time
- Idle time
- Vehicle speed
- Engine speed (RPM)
- Motor-hours of operation
- Engine operating time
- On-board power supply
- Vehicle travel route according to GPS data (option)
Advantages of CKPT 31 Lite:
- Continuous real-time recording of vehicle operational data
- Automatic wireless data transmission to the personal computer (option)
- Numerous service functions for driver and manager
- Moderate price and fast payback
- Detailed documentation
- User-friendly and informative software
- Generation of reports in the form of texts, charts and diagrams
- Certificate of conformity (CE)
|
|
|
|
|
|
ShockWatch StartManager®: Equipment Access and Usage Monitoring
for Improved Forklift Safety and Fleet Management
By preventing untrained personnel from using specified equipment, the StartManager improves forklift safety and reduces damage-related costs in your facility while monitoring usage. The device reliably monitors and records operator identity so that if damage does occur, supervisors can determine accountability and respond promptly with necessary repairs or corrective action options. Optional software provides equipment access reports, which also help supervisors decide when to train additional personnel on certain equipment to ensure OSHA regulatory compliance.
The StartManager's usage reports also provide the information needed to improve fleet management. By monitoring the number of labor hours for each piece of equipment, you can make smarter decisions about when to rotate your fleet. Optimal equipment utilization extends the equipment lifecycle while minimizing costly downtime, repairs, and replacements that result from overuse.
Features Designed for Maximum Performance:
Monitors and controls access to equipment operation
Reports data via an iButton
Includes user-friendly software with client server and Internet capabilities
Works in conjunction with your preferred access device, including HID proximity card readers, iButton readers, or infrared readers
UL rating (pending) - Type E, EE, GS, LP, LPS, DE, and DS
CE-certified (pending)
|
|
|
|
|
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The ShockLog records the date and time of up to 400 events. It has several unique features, making it especially suitable for applications in which the cost of exposure to out-of-specification environmental influences is very high. The instrument is equally convenient for protecting high-value fixed or mobile installations, or characterizing shock and vibration during transportation.
|
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The Micro ShockLog — RD317 records the date and time of up to 128 events, in addition to peak values of impacts at user-specified intervals. Optional accessories include a humidity sensor.
|
|
| ... products without technical information |
| |
|
Current measurement datalogging up to 256 measurement channel with single RS485 line. On multiple RS485 lines no channel limitations. Also wireless current measurement monitoring systems available.
|
|
The HOBO U12 4-External Channel Data Logger accepts a wide range of external sensors, including temperature, AC current, AC voltage, CO2, 4-20mA, and 0 - 2.5 vdc. 12-bit resolution provides great data accuracy.
Features:
- 12-bit resolution provides high accuracy
- Large memory for long-term deployments or fast sampling
- Five models to choose from, with flexible measurement options
- Programmable and push button start
|
|
The HOBO Energy Logger Pro Data Logger is a modular, re-configurable data logging system for energy and industrial monitoring applications.
The 15-channel system enables energy and facility management professionals to quickly and easily solve a broad range of monitoring applications without having to purchase a toolbox full of data loggers.
Features:
- Onset's most flexible data logger records up to 15 channels of over a dozen measurements
- Provides 12v excitation for third-party sensors
- Pre-configured smart sensors get you started fast
- Signal conditioning modules retain configurations until you change them, providing plug-and-play convenience for commonly used sensors
- Flexible power options include battery operation for AC power adapter
|
|
|
|
|
|
EL-USB-3
- Voltage USB data logger
- Configuration software
- Selectable
- LEDs indicate logger status
- 32,510 reading memory
This data logger measures and stores up to 32,510 voltage readings over a 0-30V d.c. measurement range. The user can easily set up the logging rate and start time, and download the stored data by plugging the module straight into a PCs USB port and running the purpose designed software under Windows 2000, XP or Vista(32-bit only). The data can then be graphed, printed and exported to other applications. The data logger is supplied complete with a long-life lithium battery. Correct functioning of the unit is indicated by flashing red and green LEDs. The data logger features a pair of screw terminals and is supplied complete with a set of measurement leads terminating in crocodile clips. This is a popular part, normally stocked in high quantity and suitable for new designs. Download the latest version (v4.0) of the configuration and graphing software from the link below.
|
|
|
|
|
|
The MC 750 network recorder is used for recording of electrical parameters in electrical grid. Records are stored in the internal memory and are available for further analysis. It records up to 32 measuring quantities and 32 alarms in the internal memory and measures more than 140 electrical quantities. With MC 750 it is easy to monitor electricity consumption in optional currency.
Features:
Measurements of instantaneous values of more than 140 quantities (U, I, P, Q, S, PF, PA, f, ö, THD, MD, energy, energy price by tariffs, etc.).
Accuracy class 0.5 or 0.2 (on demand)
Recording up to 32 measured quantities and alarms in the internal memory (4 MB flash)
Measurements of 40 minimal and maximal values in different time periods
32 adjustable alarms
Wide frequency range from 16 Hz to 400 Hz
RS 232/RS 485 communication up to 115,200 bit/s or Ethernet communication
MODBUS and DNP3 communication protocol
MMC memory card for data transmission, setting and upgrading
Up to 4 inputs or outputs (analogue outputs, pulse outputs, alarm outputs, tariff inputs)
Universal or AC power supply
Graphical LCD 128 x 64 dots with illumination
Automatic range of nominal current up to 5 A and nominal voltage up to 500 V
Adjustable tariff clock, display of electric energy consumption in optional currency
Multilingual support
User-friendly PC MiQen software
128 samples in one period
|
|
|
|
|
|
In view of the growing number of factors with a disturbing influence on power systems and the ever increasing sensitivity of the devices and installations on the consumer side, simple monitoring criteria such as undervoltage or overcurrent are usually inadequate nowadays. Reliable logging of all the relevant events within the electrical power system calls for the constant observation of a wide variety of derived parameters such as harmonic content, system unbalance or interharmonics and the swift identification of the slightest deviation from the standard state.
In addition to providing pure monitoring functions, modern power system analysing equipment should be capable of logging in full the mode of operation and the interaction of all the component parts of a power supply system.
Only comprehensive and continuous monitoring of the entire power system enables all resources to be used purposively and effectively for the restoration of system operation should a disturbance occur.
In addition, the recorded data provides the planners of electrical installations and protection equipment with an invaluable basis for the extension and optimisation of primary and secondary equipment.
If you are not already convinced of the importance of using a modern power system monitor, you certainly will be as soon as you are confronted with the question of who is liable for system disturbances and who is responsible for meeting the costs involved.
|
|
|
|
|
|
For failure events recording on voltages, currents and logical signals in power networks of home, high, and possibly also very high voltages. It is especially suitable for capturing and identification of random one-shot events in the power mains, such as short-run overvoltages, undervoltages or overcurrents.
Characteristics
- Designed for recording failure events - course of voltages, currents and logical signals in power networks of home, high, possibly also very high, voltages
- Especially suitable for capturing and identification of random one-shot events in the power mains, such as short-run overvoltages, undervoltages or overcurrents
- 3/4 galvanically isolated voltage inputs of 100 V AC and 400 V AC range
- 3/4 current inputs for use of current probes and clamps with voltage output in 0,1 ÷ 3V AC range
- Eight binary logical signals (e.g. protective components' contacts)
- Sampling frequency up to 4 kHz
- Data stored in an exchangeable SRAM memory PC-card (PCMCIA)
- Supply voltage 230 V AC, backuped with a built-in accumulator
- Setting, data visualisation and processing with Cetis32 program
|
|
| ... products without technical information |
| |
There is no easier, accurate, recording pressure system!
The DataloggerXP software*, in tandem with the XP2i digital pressure gauge, forms an integrated data logging solution by collecting, saving and transferring data to a Microsoft Excel spreadsheet. With the XP2i's long battery life, you can record up to 6000 pressure measurements for three months, without the need for external power supplies or battery replacements. Since the XP2i can measure vacuum, you can even capture pressure to vacuum transitions and much more.
Evaluate data graphically. Ideal for field calibration, chart recorder replacement, pressure safety valve (psv) testing, pipeline static pressure testing, leak testing and wellhead monitoring.
*Compatible with Windows 2000, XP and VISTA
|
|
| ... products without technical information |
| |
|
|
|
|
HTA and HTA-Ex:
HTA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch TA
sensors with thin-film sensor element can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HTA by 9 V battery or HTA- plug-in power supply
power supply HTA-Ex Li-recharchable battery, running time approx. 20 hours.
analog output 0 . 4 V = 0 . x m/s.
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HFA and HFA-Ex:
HFA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch vane wheel sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HFA by 9 V battery or HFA- plug-in power supply
power supply HFA-Ex Li-recharchable battery, running time approx. 50 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HVA:
HVA is for use in category 3G (zone 2)
hand-held instrument with IP64 type of protection to which all Höntzsch vortex sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HVA Li-recharchable battery, running time approx. 20 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
The HPM420 Series readouts and associated pressure, temperature and flow sensors provide an accurate, economical and user friendly solution for servicing and commissioning hydraulic systems and components. The HPM420 readouts have two inputs which recognise which pressure, temperature or flow sensors are connected and automatically sets the correct calibration to each input for the type of sensor being used.
The new USB compatible HPM540 and the HPM460 are ideal for use as in-house or portable display and data logging instruments.
Powered by a 9 Volt rechargeable battery, this easy to use diagnostic test system is a valuable tool for preventive maintenance, verifying component settings, pin-pointing poor system performance, measuring differential pressure and capturing harmful pressure spikes.
|
|
|
|
see the results for the following category : 
