|
|
| ... products without technical information |
| |
Dynamic Simulation of Valvetrain
The cam lobe profiles are pre-specified to meet the performance and durability development targets. The dynamic behaviour of the valve train is verified using sophisticated analysis methods and tools available in the AVL TYCON software package. The valve train is optimised for low weight, friction and wear, yet meeting the durability target and considering the production capability and material properties.
The entire valve train including the camshaft drive (chain,belt or gears) is optimised to avoid excessive vibrations and dynamic forces in the system, which lead to premature failure and excessive noise. The analysis is validated by advanced measurement techniques capturing the dynamics of valve train components supports.
|
|
Description
The range of our products extends from a single blanking and forming presses to a fully automated line with material feeding and die change by moving bolster up to complete stamping plant planning and design for optimized and uninterrupted material flow. These lines are most suitable for the production of smaller to medium-sized lot sizes and achieve very high production rates. Available drive systems include eccentric shafts in both longitudinal and transverse design as well as multi-part link drives that can be designed to suit drawing or blanking operations.
|
|
... see all the products in the category
Presses
|
Dutair remote drive side channel blowers are high pressure blowers equipped with a bare shaft and used in combination with a v-belt or coupling drive. They are an excellent solution for mobile applications because these remote drive side channel blowers can be driven by electric motors, hydraulic motors, pneumatic motors and combustible engines. Moreover, the rotation speed of Dutair remote drive side channel blowers can be increased to 4500 rev/min to raise the performance. By choosing the matching rotation speed the flow and pressure can be optimized for your process.
Dutair remote drive side channel blowers can be used for applications without electricity as power supply. Examples like material transport, vacuum lifting or mist generation show how remote drive side channel blowers can be applied as mobile use. Also in cases where only direct current is available and DC-motors have to be used the remote drive side channel blower is the best answer.
Sjerp & Jongeneel presents a program with single and double impeller versions of the Dutair remote drive side channel blower. Feel free to contact us as we will be glad to advise you about your application.
|
|
|
... see all the products in the category
Blowers
|
|
Impressive though the success story of semiconductor lasers has been, there are still several spectral "gaps", wavelengths that cannot be directly accessed with laser diodes. However, nonlinear frequency conversion techniques can be employed to generate tunable laser radiation in the UV, blue and green spectral range. TOPTICA offers state-of-the-art laser systems based on second harmonic generation (SHG), sum frequency generation (SFG) and fourth harmonic generation (FHG).
|
|
|
Sluice Gate Drives to open and close sluice gates on canals and rivers. haacon is fabricating sluice gate drives from 1- 40 t load and there are different implementations. Lift and length of rack are individually adjusted to your requirements. Most of our models suit either manual operation as well as electric motor drive. For an individual offer please send the "Checklist for dimensioning a sluice gate drive" entirely refilled back to us. You can load it and further technical data from the haacon site.
|
|
The new products in the PC-RSD-PCI Series are plugged each into a PCI bus slot on the PC to serve as a new type of silicon disk drive using a CompactFlash (CF) card in the same as a hard disk.
The PC-RSD-PCI Series has two CF card slots on the board, one of which comes standard with a CF card. The other slot is available between the PCI board brackets, allowing an additional CF card to be plugged and unplugged as a removable disk with the board installed on the PC. The second slot can extend the range of applications, such as separating the OS and data areas.
The PC-RSD-PCI board uses a highly reliable CF card (fixed disk mode), which can be partitioned into two or more drives. The PC-RSD-PCI board can also accommodate an optional additional CF card to add an additional drive or drives (thereby increasing the total capacity), in which case the two CF cards can be configured into a RAID by striping (RAID level 0), mirroring (RAID level 1), or spanning (JBOD) using a utility. The PC-RSD-PCI Series is a line of 1 GB, 2 GB, and high-capacity 4 GB and 8 GB models. These are designed environment-conscious to be lead-free and to (be scheduled to) conform to the RoHS Directive.
|
|
KRAL pumps with magnetic coupling are hermetically tight, the pump station as well as the site itself stays clean. As magnetic couplings work without wear and maintenance-free, the life cycle costs are favourable comparative to conventional sealing systems.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
|
Sumitomo's Cyclo Helical Buddybox (Cyclo HBB) combines the long-proven Cyclo reducer and a single stage offset parallel helical gearbox in a rugged integral, shaft-mounted design. The HBB incorporates the strength and flexibility of the Cyclo reducer with the adaptability of a shaft-mounted, reducer. With a 24-month warranty, regardless of hours of operation, the Cyclo HBB is an excellent choice for applications in material handling, shredders, specialty machine industries, conveyors, and other applications requiring a simple, convenient shaft mount reducer.
|
|
The CPU-H Unit is distinguished above all by its large, central hollow shaft. The hollow shaft can be used to pass cables, shafts, welding wire, compressed air, vacuum, grease, oil or even Laser beams through the centre of the gear. In addition this Unit exhibits improved gear accuracy, higher maximum rotational speeds and a large, stiff and precise output bearing that functions simultaneously as housing. Improved corrosion protection allows use even in extreme environments.
Advantages:
- Gear Transmission accuracy improved by up to 50%
- Newly developed extremely precise, high capacity and high stiffness output bearing
- Complete corrosion protection
- Viton shaft seals for the output bearing with additional protective lip
- Output compatibility with the various CPU and CHA Series
- Zero backlash, high torsional stiffness and excellent repeatability
- High torque capacity
- Compact design and light weight
- Long operating life
- High efficiency
- Quick assembly and simple installation
- Maintenance-free with lifetime grease lubrication
|
|
Paramax® helical and bevel gears of the standard Paramax range and the various special Paramax versions are the outcome of six decades of experience in drive engineering. By virtue of the modular design, they permit use under difficult and severe conditions even in the most diverse applications. The Paramax® product range consists of the standardized 9000 series as well as the special SFC designs for cooling tower drives and compressors and SEC for extruder drives.
With 26 sizes in the Paramax® 9000 series, an application can be precisely designed according to the performance, torque and velocities, thus ensuring a long service life and cost effective, powerful operation.
|
|
|
The Sumitomo Helical Shaft Mount (HSM) Speed Reducer provides a convenient installation and removal method for speed reduction by mounting directly on the drive shaft. Sumitomo's Taper-Grip® bushing design provides simple keyless mounting and easy removal. HSM is readily adaptable for CEMA screw conveyer and shaft mount options. The HSM features carburized gear teeth with optimal gear geometry and wide gear faces, allowing maximum loading and highest efficiency torque output, for higher rating capacity in the most compact design.
|
|
Fields of application for these gear reducers are rolling mills, profiling plants, crushers, double-shaft mixers, kneaders, compactors and presses. Applications of this type require two contra-rotating drives, such as provided by the POSIRED TS gear. The various designs, installation possibilities and optional accessories from the basic range of POSIRED 2 can also be used for the double shaft gear POSIRED TS.
Technical Data:
Torque (T2 nominal):1,000 up to 110,000 Nm
Transmission Ratio: 5 up to 140 iN
Centre distance (a): 122 up to 656 mm
|
|
The product range offers helical and bevel-helical gear units designed as a modular construction system enabling extraordinarily short delivery times.
Torque range: up to 900,000 Nm
Power ratings: up to 4,500 kW
Transmission ratios: up to 450 1/min
Mounting positions: horizontal and vertical
|
|
Mini reducer under casing CSF
A component last generation (standard HFUC) associated with a powerful bearing of exit (at 4 contact points). From 20 with 48mm for a couple max from 1,4 to 28 Nm.
Benefit produced:
* Reducer with null play. It is particularly compact with a bearing of exit at 4 contact points and a strong integration of the reducer in the casing
* Particularly compact with a bearing of exit at 4 contact points and a strong integration of the reducer in the casing.
Characteristics produced:
* C max from 1,4 to 28 Nm
* Report/ratio of reduction from 30 to 100
* Diameter X length of 20x17 with 51x45
* Very high compactness (component last generation) and bearing of exit at 4 contact points.
* 3 versions: - adaptation engine in entry and flask of exit (2XH-F),
- adaptation engine in entry and output shaft (2XH-J),
- tree of entry and output shaft (1U)
Sectors of use:
* Robotics,
* Special machines,
* Semiconductors,
* Machines of assembly.
|
|
REDUCER CPU-M
Reducer under casing associating a reducer without play Harmonic Drive with a bearing of exit of large diameter with cross rollers.
Range CPU is a family of product, the version - M adapts to all the engines of the market. We adapt the hub to your driving shaft. The driving whole + reducing under casing CPU-M is particularly compact.
Benefit produced:
* Adaptability with all the engines of the market.
* Compactness of the assembly.
* High strength of the bearing of exit of large diameter to cross rollers
Characteristics produced:
* Couples of exit until 1840Nm,
* Radial force on the bearing of exit until 38.400N, length max 84mm.
* Utmost precision,
* Compactness of the assembly, adaptability to all the engines.
Sectors of use:
* Robotics,
* Machine tools,
* Special machines
|
|
Lifting gears and conveyor drives in which the drum and driving motor are arranged in parallel require a step-down gear unit with a corresponding large axle base. The lifting gear units in the POSIRED N series are designed for this application and ideally bridge the given distance between the motor and drum. The development of this series is based on widespread experience in crane engineering, belt conveyor drives, winches, and hoisting devices. The accessories needed for this application such as elastic clutches, barrel clut-ches, brakes and substructures, can be supplied together with the gear reducers.
Technical Data:
Torque (T2 nominal): 8,000 up to 800,000 Nm
Transmission Ratio: 12.5 up to 500 iN
|
|
The POSIRED 2 range with its high degree of standardization and consistent modularity ensures flexibility and short delivery times. A large number of standard options with a great variety of versions guarantee optimal adaptation in almost every area of mechanical and plant construction. An extensive range of accessories in-creases the adaptability of this gear reducer. As a standard, fans, cooling coil, external oil cooler, heating rods, torque supports, engine consoles, sub-constructions and operation monitoring systems are available.
Technical Data:
Torque (T2 nominal): 1,000 up to 800,000 Nm
Transmission Ratio: 1.25 up to 710 iN
Power Rating: up to 4,400 kW
|
|
SIMATIC Microbox PC 427B – ultra-compact, flexible and maintenance-free
The SIMATIC Microbox PC 427B is equipped with powerful, energy-saving Intel Celeron M and Pentium M processors up to 1.4 gigahertz and offers more than double the computing power of the predecessor model. Thanks to its rugged PC technology, it is suitable for use in the machine.
The absence of moving parts (fans) and the application of CompactFlash ensures maintenance-free continuous operation - up to an ambient temperature of +55 °C and with high system availability. High adaptability and flexibility for measuring and control tasks are provided by the 4 USB and 2 Gigabit Ethernet interfaces as well as the optional PROFIBUS connection. Expansions can be carried out using up to 3 PCI-104 slots.
|
|
SIMATIC Rack PCs are flexible industrial PC systems in 19" design with high system availability for high-performance applications.
Suitable for horizontal and vertical application, they facilitate the realization of manifold tasks:
Measuring, open- and closed-loop control of industrial processes
Visualization of production processes
Image processing, e.g. within the scope of quality inspections
Data acquisition and management, e.g. for recipe management
SIMATIC Rack PC 547B - Maximum performance at an attractive price with Intel Core2 Duo processors.
SIMATIC Rack PC 847B - Maximum expandability and industrial functionality with Intel Core2 Duo processors.
|
|
SIMATIC Box PCs are particularly compact and rugged industrial PC systems for machine engineers, plant engineers, and control cabinet builders. They permit powerful yet space-optimized applications.
Three device classes are available for different requirements:
SIMATIC Microbox PC 427B – ultra-compact and maintenance-free: the flexible embedded industrial PC
SIMATIC Box PC 627B – maximum performance in minimum space / with Intel® Core™ 2 Duo technology
SIMATIC Box PC 827B – maximum performance and flexibility with Intel® Core™ 2 Duo technology
|
|
|
As a mere display unit or optionally with touch operation, the flat panel monitors with brilliant 12", 15" and 19" displays are the ideal add-on for all SIAMTIC PCs. Thanks to their scratch-resistant, anti-reflective mineral glass screen and a 24 V DC power supply, they are particularly suitable for industrial applications in machine proximity.
|
|
RS-300 Regenerative Source
The RS-300™ is a regenerative three phase AC/DC converter intended to supply constant DC link voltage to AV-300 series inverters. The unit is also able to supply a DC input to inverters of other brands. The output DC link voltage of RS-300 is kept constant within a specified range even if the inverter operates in regenerative mode and supplies the power back to the DC link. The RS-300 converter is designed for continuous operation in regenerative mode up to the full rated current of rectifier mode. This makes it possible to use a RS-300 fed inverter in applications which require continuous regeneration.
Features and Benefits:
Can feed single inverter and multiple inverter systems
Energy savings for applications which require frequent regeneration
Optional keypad programmer or standard GE Toolbox
Two choices for start-up and tuning
Windows® based GE Toolbox
Set parameters and program converter I/O, self-tune regulators, or keypad
Communication Options
|
|
Cone Drive has a range of gear coupling solutions to meet our Customer's requirements for integration into our gearboxes or to supply on a replacement basis.
A torsionally rigid, lubricated design that offers high torque capacity, application versatility, and where high torque loads exist or shaft diameters exceed 100mm, the lowest initial cost. Available in 28 sizes, and all featuring triple-crowned teeth, David Brown gear couplings offer the industry leading torque ratings (over 8 million Nm) and the largest bore capacities (up to 1025 mm).
- Type GC02 & GC05 Continuous Sleeve Couplings - Features a one-piece, low profile sleeve encompassing the hubs. Economical and compact they are available in both close coupled and floating shaft models.
- Type G/GF32 Spacer Coupling - For pumps and compressor applications, provide ease of servicing 'connected' equipment.
- Type G/GF52 Floating Shaft Coupling - Used when distance between equipment is too great for spacer couplings. Two single engagement couplings with interconnecting shaft. Also available for vertical mounting.
- Type G/GF20 Close - Coupled Double Engagement Coupling - Design with 2 flex halves to accommodate both offset and angular misalignment. Also available for vertical mounting.
|
|
The product range covers flexible and highly flexible couplings, gear couplings, all-steel couplings, fluid couplings, clutches and torque limiters.
N-EUPEX (pin coupling) up to 62,000 Nm
BIPEX (claw coupling) up to 3,700 Nm
RUPEX (pin and bush coupling) up to 1,300,000 Nm
ELPEX (ring coupling) up to 90,000 Nm
ELPEX-S (rubber disk coupling) up to 40,000 Nm
ZAPEX (gear coupling) up to 7,200,000 Nm
ARPEX (all-steel coupling) up to 1,500,000 nm
FLUDEX (fluid coupling) up to 1,500 Nm
PLANOX (clutch) up to 30,000 Nm
|
|
|
