|
|
|
|
|
|
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program DC/DC converters for automotive applications. The series WRC is available with 30, 60, 100 and 150 W. The converters are designed for mobile use acc. to EN 50 155, LES-DB-BN 411 002 and IEC 571-1 (railway, automotive). The battery voltages 24, 36, 72, 90 and 110 V +40/-45 % are covered with three input voltage ranges. All four power ranges have a high efficiency and are available with single or dual output voltages. The converters have an extreme high reliability (MTBF >1.000.000 h, TA = +40 °C) and an isolation of at least 2,1 kVDC (prim.-sec.). The temperature range is -40...+85 °C acc. to EN 50 155. Other important features are resistance against vibrations and reverse polarity protection at the input. The power supplies can be used in 19" racks or for wall mounting with H15 connector. The series WRC needs no ground load, is short circuit protected and has extensive monitoring and protection systems.
|
|
DCS50
Battery powered DC/DC Converters for 19 inch Rack mounting purposes are available from the Huhn-Rohrbacher Power Supply Company. The power range covers 50 to 150 watts.
* 19"-Eurostandard
* EMI Compliant Design
* 3U / 8 HP / 160mm
* Wide Range Input 2:1
* Single Output 50 Watts
* Galvanic Insulation
* CE Sign
|
|
TPCMQ48 DC/DC Converters
1U High, Up to 700 Watts with Integral Hot-Swap Provision
* 48VDC to 12 or 24VDC
* Includes Isolated 5V, ¼A Standby Output
* Hot-Swap Operation
* Wide Range 40 to 60VDC Input
* Integral LED Status Indicators
* I2C Serial Data Bus Option
* Up to 8.8 Watts/Cubic Inch Power Density
* Low Profile: 1.6 Inches (41mm) High
* Single Hot-Swappable Connector
* Reverse Air Flow Option
* Staged Pin Engagement
* ORing Diode on Output
* 1U, 19” Rack Holds 3 Units
* Active Current Sharing
* Optimized Thermal Management
* No Minimum Load
* Control & Monitoring Features
* DC to DC Converter
|
|
DC/DC 19“
Multiple output 50 - 70 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output permanent short-circuit proof
– Ripple at output < 25 mVpp
– Interference emission according to EN 55011 / EN 55022 Class B
– Outputs SELV according to EN 60950
|
|
DC/DC 19“
Single output 20 - 100 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output SELV according to EN 60950 and permanent short-circuit proof
– Remote on/off
– Parallel connection possible with load sharing
– EMC Standards EN 50081-1 and EN 50082-2
– VMEbus signals or Power-Fail available upon request
|
|
| ... products without technical information |
| |
|
|
|
|
AirClean Systems PCR Combination Workstation
AirClean®Systems PCR workstations with UVTect™ microprocessor control, allow you to maintain a Class 100 clean work area during PCR preparation. The AC600 Series LFUV Model has a built-in 254 nm ultraviolet light that allows the operator to irradiate tubes, flasks and pipettes between amplifications. The 254 nm ultraviolet light will effectively destroy potentially contaminating DNA and RNA within minutes. UVTect™ monitors the life of the bulb to ensure proper levels of irradiation.
The workstations feature a unique interlocking sash with a safety overlap to prevent gaps. The sash also has a safety switch that automatically turns off the ultraviolet light and activates the blower and fluorescent light when the sash is raised. This revolutionary uni-body design provides unmatched user protection from harmful ultraviolet rays during the sterilization process. HEPA filtered units have a built-in monitoring system to alert the user when to change the HEPA filter.
|
|
BIGNEAT's PCR UV workstation efficiently protects against contamination by bathing PCR aparatus in sterile air and limiting the risk of contamination from the operators arms, or from equipment bought into the otherwise sterile environment.
Powerful UV lamps are combined with optical reflectors to ensure uniform intensity distribution of the sterilising UV radiation.
1. Superb all round vision
2. Electronic filter saturation indicator
3. Quiet operation
SPECIAL BIGNEAT FEATURE: Fan speed increases when door is opened to maintain air velocity to 0.45 m/s at the front access aperture.
Available 800mm wide as PCR UV cabinet, or as a UV sterilisation cabinet (no HEPA filtration)
|
|
POWERFUL UV DECONTAMINATION
The UV lamp insures a full decontamination of the entire work surface, enclosure walls and PCR equipment.
AN ERGONOMY OF QUALITY
The ergonomy of the working apertures is unique. It enables the protection of the handling while allowing the operator to have access to the entire surface of the enclosure.
ENCLOSURE SIZE ADAPTED TO ALL PCR EQUIPMENT
The Biocap™ enclosures have been sized to receive tube racks, pipettes, minicentrifuges and thermocyclers.
PROTECTION OF THE OPERATOR
The enclosure is 10 mm thick so as to insure a full protection against UV and B rays.
AUTOMATIC SHUTT OFF OF THE UV LAMP
The UV lamp switches itself off automaticaly if the door is opened by accident while the lamp is still active.
*PCR is a patented process owned by Hoffmann-La Roche
|
|
AirClean Systems AC600 Series Ductless Workstations
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
|
|
The fume cabinet, fume hood and extraction chamber all in one.
Ideal where complete freedom is required to work on several processes at once and where ease of visibilty is essential. Where fumes spread rapidly, for example in draughty working conditions, the Cleancab™ can enclose the source, enabling fumes to be captured before they contaminate the workplace.
Cleancab™ fume hoods: -
Have a shatterproof clear polycarbonate hood
Utilise a chemically resistant base
Include an integral airflow valve
Are heat resistant
Are ESD safe
Are easily cleaned
|
|
| ... products without technical information |
| |
RACK PRESSES 400 kg / 600 kg
The rack and pinion main feature is providing constant linear power over the whole travel according to the applied load.
|
|
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free
|
|
Manual Rack and Pinion Presses 2kN - 4kN
Sturdy and easy to operate presses
Cylindrical or V-shaped ways with adjustable stop
The press is guided by an H7 machined flat guidance
The daylight can be adjusted quickly and easily
A solid clamp safeguards the exact position of the press head
Table with wide T grooved clamping surfaces
Extended throat and height frames can be supplied but only for the 4kN HZP
The range of application can be substantially expanded by means of customer-specific accessory equipment
|
|
| ... products without technical information |
| |
The Rousseau mobile cabinet is one of the safest on the market
It is very easy to modify the configuration of the cabinet; drawer order can be changed at any time
Polyurethane casters with high quality rolling systems make moving the cabinet easy and do not leave marks
For a personalized configuration, contact a customer service representative
|
|
|
|
|
|
Mobile storage
bott’s range of mobile storage products gives customers the flexibility to safely move tools, equipment, components and work surfaces to wherever they’re needed.
All feature four heavy duty castors (two fixed; two 360° swivel with foot brakes) – and mobile storage units with drawers feature a safety trigger mechanism that means drawers cannot open accidentally. Drawer blocking as standard means that only one drawer can be opened at a time, optimising stability in use.
Heavy duty castors with two foot brakes
Side or front mounted handle for safe, controlled movement
Safety trigger mechanism prevents drawers opening accidentally
Ergonomic reach-through handle makes low drawers easier to open without stretching
Blocking mechanism as standard – only one drawer can be pulled out at a time
Labelling strips with easy-open transparent cover. Template for consistent labelling downloadable from www.bott-group.com
High strength drawer pan accepts a wide range of dividers, adjustable on a 25mm pitch grid
Wide range of drawer dividing accessories available
100kg UDL 93% extension drawer guides as standard for high load bearing capacity
High quality locking system, optional master key system
Electronic remote locking system option
|
|
Wherever you need to work, Stanley® Vidmar® mobile storage cabinets are in on the action! Heavy-duty mobile casters make our mobile cabinets easy to move, allowing you to position them exactly where you need them.
Stanley Vidmar offers preconfigured mobile storage cabinets, or you can custom-build your mobile cabinet in any size and configuration you choose! All Stanley® Vidmar® mobile storage cabinets require lock-in/lock-out latches or single-drawer release.
All mobile cabinets are backed by Stanley Vidmar's lifetime warranty. For more detailed information on mobile cabinet options, visit our Interactive Product Catalog or contact a Storage Sales Engineer.
|
|
Mobile Storage Cabinets
5-Drawer 79-Compartment Shallow Depth Mobile Storage Cabinet
5-Drawer 127-Compartment Extra-Wide Shallow-Depth Mobile Storage Cabinet
4-Drawer 100-Compartment Standard Mobile Storage Cabinet
8-Drawer 142-Compartment Shallow-Depth Mobile Storage Cabinet
8-Drawer 220-Compartment Extra-Wide Shallow Depth Mobile Storage Cabinet
|
|
|
|
|
|
General
The models of series EA-PS 800 19” are available as sin-
gle, dual or triple output power-supplies. By combining the
synchronised-rectifer and semi-resonant converter princip-
le, an effciency of up to 92% is achieved, thus making them
highly effcient and extremely reliable as a result.
Output
A choice of output voltages between 3.3V, 5V, 12-15V and
24V at power levels of 80W, 150W and 240W are available.
All outputs, main and supplementary, are provided with a
static current limit and a power limit circuit and are stabilised
independently, making them truly zero-load compatible,
fully short-circuit- and overload-proof.
All output voltages can be trimmed within a specifc range
by potentiometers located in the front panel to accommo-
date sensitive loads, and are visualised via LEDs.
The integrated OVP protects the equipment connected
from DC overvoltage damage.
Input
A wide input range of 90 up to 264 V AC (90…360 V DC)
with active PFC (power factor correction) makes them
suitable for a worldwide usage or as isolated DC/DC con-
verters as well.
Remote sense
The remote sensing circuit located at the H15 connector
can be connected to the input terminals of the load in order
to compensate for the voltage loss across the main output
wires, ensuring a stable and precise voltage to sensitive
equipment connected.
|
|
|
|
|
|
Features:
54 Models: 5 to 1000 Vdc, 3 to 900 Adc
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz and 60 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics PQ SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. PQ SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
|
|
|
|
80 Models: 16 to 1000 Vdc, 20 to 2700 Adc
FEATURES:
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz to 400 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics TS SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. TS SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
1U High, Up to 450 Watts with PFC and Hot-Swap Provision
FEATURES
- Includes Isolated 5V, ¼A Standby Output
- Hot-Swap Operation
- 12, 24 or 48VDC Outputs
- I2C Serial Data Bus Option
- Integral LED Status Indicators
- Up to 5.6 Watts/Cubic Inch
- Power Factor Corrected
- Low Profile: 1.6 Inches (41mm) High
- Single Hot-Swappable Connector
- Staged Pin Engagement
- ORing Diodes on Output
- 1U, 19" Racks Hold 2 or 3 Units*
- Active Current Sharing
- Universal 85 to 264VAC Input
- Class B EMI Input Filter
- Optimized Thermal Management
- No Minimum Load
- Control & Monitoring Features
- Front-End Switcher - PCG & TPCG
- SEMI F47 Compliant at Hi-Line
|
|
Camfil Farr offers a wide range of housings in different versions i.e. galvanised or staniless steel. All Camfil Farr housings are always best in class products.
Example of advatages:
* Easy to install
* Modular construction
* No tools needed to change filters
* Gasket to seal between door and filter
* Clamping device for the filter
* Stable and secure design
|
|
Filter Houses
The Preferred Choice
Braden filter houses are the preferred choice of OEM’s for new installations and the favorite choice of GT owners retrofitting their systems. With proprietary designs and numerous global manufacturing locations to satisfy local content requirements, Braden can provide an outstanding solution.
• Filter Houses
• Inlet Cooling / Heating Coils
• Evaporative Coolers
• Over 700 Filter Houses Built
|
|
|
Suitable for both liquids and gases, these housings are ideal for high flow corrosive applications with 1” to 2” line sizes. A variety of flange connections is also available and the housing can be supplied in exotic materials such as Monel and Hastelloy.
|
|
 see the results for the following category : Labware |
|
|
