|
|
| ... products without technical information |
| |
|
DIN bar controller with incorporated SSR and heatsink for 25, 40, 60, 75, 90, 120 Ampere currents
|
|
|
Yaskawa's Bestact high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available.
|
|
|
The IMO Power Relay range offers switching capabilities up to 60A, with a wide range of termination and mounting options the range also includes products that offer High Isolation.
|
|
|
|
|
|
The Candy Switch is used by thousands of equipment manufacturers and users world-wide to control circuits during a machine cycle. This Candy Switch can vary the "on-off" time cycle as well as the length of "on" dwell time. Each electrically controlled machine component can be synchronized to the demands of the parent machine without custom designed cams or expensive electronic devices.
The Candy Switch is available in both solid-state and electro-mechanical models. A variety of cams and switching mechanisms allow the Candy Switch to accomodate most every industrial application. The solid-state models provide precise, repeatable timing control for over 100 million cycles.
Solid State Model
For applications that require higher switching speeds and greater accuracy, Candy offers a complete line of solid-state switches. This line employs a board mounted photo scanner which reads a reflective pattern from a printed cam.
The N cam is the standard cam for most solid-state models. Alternative cams are available with different operating characteristics as described to the lower right.
|
|
SCR Power Controller Series ZC/PC
• Extends Heater Life – Reduces Thermal Shock
• All Solid-State Design – No Maintenance Required
• Soft-Start and Voltage Limit (Optional on PC)
• Zero Voltage or Phase Angle-Fired
• Full Power Rating at 120° F (49° C) Ambient Temperature
• 10 - 35 amps
|
|
Regulated switch mode power supplies from 0.3 to 40 A for industrial applications
Description
Modular and optimum power supplies for networks single-phase 100-240 V
Output voltage: 5, 12, 24, 48 V -7 W-145 W
Highly compact sizev
Wide voltage range
Fixing by screw or on omega rail
Universal power supplies, for networks single/3-phase 100-500 V
Output voltage: 24 V and 5 to 15 V by converter modules 48 V/72 W-960 W
Integrated energy reserve
6 product references from 3 A to 40 A
Fixing on omega rail
Advanced diagnostics by LED and relay contact
Integrated anti-harmonics filter
Function modules to respond to problems of network cuts, 24 VDC circuit overloads and availability
|
|
A family of RF power detector integrated in loop controllers for PA power control applications in cellular handsets.
|
|
Control Power Transformer
Our wide range of control power transformers is designed to provide control power in medium voltage switchgear. Units are available in both single and three phase configurations with some models capable of vertical mounting to conserve space.
Features and Benefits:
Manufactured to meet the requirements of IEEE C57.12.01
Primary windings are vacuum cast for high dielectric strength and ruggedness. Vacuum cast secondary coils are available in some models.
Constructed with high quality grain-oriented core steel and copper conductor
Units are partial discharge tested in accordance with Canadian Standard C9-M1981 (reaffirmed 1997)
Standard voltages are 120/240 for single phase units and 208Y/120 for three phase units with other voltages available.
Product Scope:
Voltage Class: 5 to 34.5 kV
BIL ratings: 60 to 150 kV
Thermal Ratings: 0.5 to 150 kVA
|
|
POWER FACTOR CONTROLLER
- No need to use extra energy analyzer/multimeter in your compensation panel.
- Indice synchronization with electric meters.
- Built-in temperature sensor.
- Dynamic compensation mode, detects failed capacitors which are least than 20 % of its initial value. Automatic withdrawal of failed capacitor from compensation.
- Transmission error < 0, 1 %
- Real time clock
- Indicating voltage and current harmonics up to 21st harmonics over harmonics spectrum and harmonics tables.
- Indicating connection time for each of the banks.
- Learning connection configurations and capacitor stages.
|
|
The network analyzer MCA Plus is an instrument that measures, calculates and shows the main electrical parameters in industrial 3 phases networks (either well-balanced or non-well balanced).
Reactive energy controllers MCE and MCX are designed for measuring the needs of reactive power in an installation and carry the necessary instructions for switching on/off the capacitors in order to maintain the right power factor cos.
|
|
| ... products without technical information |
| |
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
The Model 977v3 Pulsed DC Controller has been designed to operate with the full industrial range of Meech Pulsed DC static elimination equipment. It is light and compact but able to cope with the most technically demanding industrial applications. In addition to the ability to control power output, frequency and polarity, the 977v3 also offers alarm and remote monitoring and control functionality. A new feature of the 977v3 is an 8- way DIN for connection of an ion balance sensor and feedback system. Patent No. ZL200530000278.0
|
|
|
The Model 233v3 Pulsed DC Controller has been designed to operate with the Series 200 range of ionisers for ESD applications. The 233v3 is light, compact and features lockable plug and socket connectors for quick release. It also provides the option of Steady State DC (SSDC) output.
|
|
|
The device that maintains continuous power supply even on the absence of mains power supply is called UPS or Uninterrupted power supply. This is usually connected between the main source and the working system. It switches from the mains power supply to the battery power instantaneously whenever there is a fault in the mains power supply or the power supply is not there at all. It is generally used to protect typically computers, telecommunications equipment, and other electrical equipment where there is a chance of power failure. UPS are available from 200VA onwards to large systems which can support the power supply of multistoried buildings. It is typically the need of all data centers, and computer network systems. Sometimes in large systems it is used in conjunction with generators but it is not to be confused with standby generators. UPS are used for short and instantaneous power supply needs though for longer terms it may be used with a generator.
|
|
... see all the products in the category
UPSs
|
| ... products without technical information |
| |
|
|
|
|
The power steering controllers are designed to enable and to control the speed of hydraulic (series wound and permanent magnet ) motors used for power steering in industrial vehicles. These controls are used in conjunction hall effect pulse encoders that supply movement inputs from the steering wheel of the vehicle to the controller. The control will start the motor when steering wheel is moved and ramp up the speed of the motor proportionally to the speed which the steering wheel is rotated. If no movement of the steering wheel is sensed after a pre-set time, the control will shut off the motor, to save energy, reduce noise and extend battery life.
- Voltage Range : 24-48VDC and 72-80VDC
- Armature Current Limit : 60 Amps
- One Hour Rating (In Air) : 15 Amps
- One Minute Rating : 35 Amps
- Frequency : Constant 15KHZ
Features and Benefits:
- Variable idle speed available to protect pump
- Variable steer compensation allows the use of custom sensors
- Variable relief enable allows operation without steer sensors
- A stop timer extends battery life
|
|
|
|
|
|
Power M (16 axis numeric controller)
It represents the TOP of the range of controllers “All in one” produced by Tex Computer and based on an owner operative system Real Time Multitasking implemented on a processor RISC 32 bit which includes editor ASCII and compilation functions.
It’s available with LCD display 8,4” or 15”, with or without touch screen, possibility to connect in Ethernet and manage axis through interfaces:
• Analog: +/- 10V
• Digital: PWM o Step / Direction
• FieldBus: CANopen (DS402) and soon EtherCAT
PLC/CNC/HMI tasks programming in structured language and the possibility to execute complex axis interpolation functions make this product suitable to manage automatic machines with high productivity and robotics.
It’s available with classic ISO program which can be personalized in order to make it more user friendly and functional to the application.
You can also connect a digital telecamera to the controller which allows the user to control working in dangerous and not so easy to reach areas not.
|
|
| ... products without technical information |
| |
|
Motor control centers provide a convenient, centralized means of protecting and controlling all of a facility's motor loads.
|
|
Variable Speed Drives
GE Consumer & Industrial introduces a complete new line of feature packed drives.
|
|
|
... see all the products in the category
AC drives
|
|
|
see the results for the following category : 
