|
|
|
|
|
|
The DECS 50/5 (Digital EC Controller Sensorless) is a new controller for driving brushless DC motors without Hall sensors.
Typical sensorless drives such as pumps and fan applications can now easily be created thanks to modern technology and expert integrated controlling algorithms. maxon's own in-house developed speed controller is particularly impressive through its performance, price and size.
As well as being a top performer, attractively priced and very small, the new amplifier's other key feature is that it can be easily adapted to specific requirements. The free choice of starting sequence is a major benefit, as it allows the attached motor to start up easily, even when the motor data or load ratios are unfavourable. The DECS 50/5 also provides control inputs for selecting motor direction, enable and braking. As usual, the necessary protective functions have all been fully implemented. An operating status display (LED) and speed monitor output complete the convenient control features.
|
|
|
|
|
|
Low Voltage PWM Brushless DC Controls
Rated for 50° C ambient.
Drives 130V Bodine BLDC Motors.
Drives 24V Bodine brushless motors.
To be mounted in separate enclosure supplied by user.
Requires an unregulated 24 VDC power supply with a minimum 5000 MFD capacitance.
20kHz PWM switching frequency.
Enclosed Filtered SCR Brushless DC Controls
Rated for 40° C ambient.
Drives 130V Bodine Brushless DC Motors.
Two ways of mounting: face mounting using self-tapping screws on back surface, or flange mounting by installing four brackets (included).
Model 3912 for 2500 rpm motors.
Model 3913 for 10,000 rpm motors.
Filtered Brushless DC Controls
Rated for 50° C ambient.
Intended to be mounted in separate enclosure supplied by user.
Drives 130V Bodine Brushless DC Motors.
Screw terminal block for line and motor connections.
Plug-in connector for commutation connections.
Model 3911 for 2500 rpm motors.
Model 3921 for 10,000 rpm motors.
Unfiltered SCR Brushless DC Controls
Rated for 50° C ambient.
Intended to be mounted in separate enclosure supplied by user.
Drives 130V Bodine Brushless DC Motors.
Screw terminal block for line and motor connections.
.25 inch quick connect tabs for line, motor connections, and user interface connections.
Plug-in connector for commutation connections.
|
|
|
All AMETEK brushless DC motors and blowers require a motor/blower controller to operate. Many of these AMETEK BLDC motors and blowers feature a built in, integrated controller that takes the DC input from a power supply or battery and processes it into phase drive signals that are used to commutate the motor. Motors and blowers that require low voltage DC input (11 to 52 volts) that do not come equipped with an integrated, onboard controller, require one of the external controllers described in this section.
|
|
Northland offers a full line of Brushless DC Motor Controls that can
be mounted to our motors, pumps and blowers, or used externally.
These versatile controls can also be used with BLDC motors from other
manufacturers. Our controls are designed for use with Hall Effect style
motors with spacing of either 60° or 120°. Features / options include:
Voltage Input:
- 85 - 132 VAC
- 198 - 264 VAC
- 10 - 54 VDC
Communications:
- RS232
Speed Adjustment / Control:
- Speed: fixed single, multiple fixed, variable
- Speed control input signal (PWM 2.5 7.5 KHz): 0-5 VDC 0-20ma, 0-10 VDC 4-20ma
|
|
|
|
|
|
BX Series Brushless DC Speed Control Systems (804)
The BX Series brushless speed control system offers high performance and simple operation from a compact driver and motor. Combined with the optional OPX-1A control module, the BX Series can also provide excellent position control and torque control capabilities.
- AC input
- Frame sizes from 2.36 in to 4.33 in
- Output power from 1/25 HP (30 W) to 1/2 HP (400 W)
- Rated torque from 0.88 lb-in to 610 lb-in
- Variable speed ranges from 0.015 ~ 15 r/min to 3 ~ 3000 r/min
- RoHS compliant models available
BLF Series Brushless DC Speed Control Systems (189)
The BLF Series combines the attractive features of a brushless DC motor, such as compact size, high output, flat torque, excellent speed stability and energy-saving design, with exciting new enhancements that include a wider speed range and multi-speed operation. Using the digital operator, you can draw the maximum performance out of this feature-rich BLF Series with ease.
- AC Input
- Frame sizes from 2.36 in. to 4.09 in.
- Output power from 1/25 HP (30W) to 1/2 HP (400W)
- Rated torque from 0.89 lb-in to 610 lb-in
- Variable speed ranges from 0.4 ~ 20 r/min to 80 ~ 4,000 r/min
- Hollow shaft flat gearhead models available
- RoHS compliant
|
|
TMCM-160
Description
1-axis BLDC controller/driver module 5A/40V
The TMCM-160 is a controller / driver module for general brushless DC motor applications. It integrates velocity and torque control as well as a hall sensor based positioning mode. The position resolution depends on the motor, i.e. a standard 8 pole motor gives a motor axis resolution of 15 degrees. The module can be used in stand alone operation or remote controlled via a RS-232 or RS-485 interface (ordering option). Its small form factor (50 x 92 mm²) allows for integration onto a user board as a plug-on module or for panel mounting, by connecting flat ribbon cables to the two 2x13 2.54mm standard header connectors. Multi-axis drives can be easily realized by integrating multiple modules on one baseboard. A standard baseboard (BB-160) is available.
|
|
TMCM-163-42 V2
Description
1-axis BLDC controller/driver 12A/39V, motor mountable
The TMCM-163-42 is a controller / driver module for general brushless DC motor applications. It integrates velocity and torque control as well as a hall sensor based positioning mode. The position resolution depends on the motor, i.e. a standard 8 pole motor gives a motor axis resolution of 15 degrees. The module can be used in stand alone operation or remote controlled via a RS232 or RS485 interface (ordering option). Its small form factor (42 x 42 x 20 mm³) allows for mounting directly on a motor (NEMA 17 mounting holes - new V2 version only).
|
|
HeiServo EC Compact
Our control "EC-Compact" EC-C)is an electronic 1-Q control for brushless DC motors. This control is extremely small and compact which allows its integration inside the terminal box. It can be used for Heidolph EC motors and servo drives.
|
|
SPECIFICATIONS:
- PRODUCT NAME / Model: BLDC motor driver¡þMCR-BL2406B (V6.0)
- POWER INPUT: DC24V +_20% or DC12V(Made by Order)
- DRIVING CURRENT: 6A (Max.)
- MOTOR WATTS: 150W
- SPEED CONTROL RANGE: 50:1
- OPERATION FUNCTIONS:
Acceleration/Deceleration time setting separate
Motor Swift CW/ CCW
Internal / External speed control selection
Output disable
Hall IC 3 phases signal output¡· Instant torque PWM output
Alarm hold or not selectable (Note 1)
Overload detection
60¢X / 120¢XHall Sensor position selection¡· Overheat protection
Motor overheat protection (Made by order)
External reset
- SPEED SETTING: Internal/ External VR for speed control (20K Ohmic , 0 5V)
- ACCELERATION / DECELERATION TIME: 0~5 seconds
- INPUT SIGNAL: Run/Stop, rotation direction, torque and instantaneous stops ,reset
- OPERATING TEMP/ HUMIDITY: -40 °C to +85 °C
- DIMENSIONS/ WEIGHT: 60(L)x108(W)x30(H)+1 mm / 180g
|
|
| ... products without technical information |
| |
... see all the products in the category
DC drives
|
| ... products without technical information |
| |
Stepping Motors are motors which can be directly controlled by digital signals and rotate at constant angles according
to a pulse signal. These motors specified by EC Motion have been used in various application to control angle, speed
and position. A full line of various models is available with superior features, excellent torque characteristics and high
reliability in order to meet the requirements of your specific application.
our 2-Phase-Step Motors have following sizes:
20mm, 28mm, 35mm, 39mm, 42mm, 56.4mm, 60mm and 86mm.
Full Step Angle from: 1,8°, 0,9° and 0,45°
Holding torque from: 0,017 Nm up to 10,2 Nm
all Step Motors are available with Single-Shaft (A or AE) and Double-Shaft (B or BE). The Step Motors Series SECM26... and SECM29... are also available with Terminal Box.
other designs are:
- Step Motor with Planetary Gear
- Step Motor with Encoder
- Step Motor with electromagnetic Brake
to drive our Step Motors you can use our Driver-Series SMD-Series and ECMD-Series
|
|
Stepping Motors are motors which can be directly controlled by digital signals and rotate at constant angles according
to a pulse signal. These motors specified by EC Motion have been used in various application to control angle, speed
and position. A full line of various models is available with superior features, excellent torque characteristics and high
reliability in order to meet the requirements of your specific application.
our 5-Phase-Step Motors have following sizes: 60mm and 86mm.
Full Step Angle from: 0,72°
Holding torque from: 0,42 Nm up to 6,3 Nm
all Step Motors are available with Single-Shaft (A) and Double-Shaft (B).
other designs are:
- Step Motor with Planetary Gear
- Step Motor with Encoder
to drive our Step Motors you can use our Driver-Series SMD-Series
|
|
the 2-Phase-Step Motors SECM24..., SECM26... and ECM26... Series and the 5-Phase-Step Motors SECM56... and SECM59... Series are available with Encoder. The Specification of the Encoder is as follows:
2-Phase-Step-Motor:
Output-Signal: TTL or Line-Drive, 200 Counts/Revolution
5-Phase-Step-Motor:
Output-Signal: TTL or Line-Drive, 500 Counts/Revolution
|
|
Water pump with BLDC motor: Pump: wet-rotor principle not self-priming, intake fitting radial or axial
BLDC motor: single phase, unipolar, inner rotor design, overload protection, integrated RFI, protection against false polarity
Protection class: IP6K9K
|
|
Article: Phasecurrent: Voltage: for Step-Motor-Series
ECMD241 0,5 A - 1,25 A 24 V - 40 V HECM21, HECM22, ECM23
ECMD241 1,0 A - 2,5 A 24 V - 40 V HECM21/22, HECM24, SECM24
ECMD243 0,5 A - 3,5 A 24 V - 42 V HECM26, SECM26, HECM24
ECMD275 1,25 A - 5 A 24 V - 80 V HECM26, SECM26, SECM29
ECMD285 1,25 A - 5 A 24 V - 80 V HECM26, SECM26, SECM29
ECMD2810 2,5 A - 10 A 24 V - 80 V HECM26, SECM26, SECM29
ECMD2135 1,25 A - 5 A 70 V - 130 V HECM26, SECM26, SECM29
ECMD21310 2,5 A - 10 A 70 V - 130 V HECM26, SECM26, SECM29
|
|
Galil's AMP-19540 is a 4-axis amplifier for driving brush or brushless motors up to 500 Watts. By interfacing directly to Galil's DMC-18x2, DMC-18x0, or DMC-18x6 controllers, it provides a cost-effective controller/drive solution for multi-axis applications. The AMP-19540 contains four transconductance, PWM amplifiers for driving brush or brushless motors. Each amplifier operates at 18V to 80V dc, up to 7 Amps continuous, 10 Amps peak. The AMP-19540 gain setting is easily configured with jumpers. The PWM switching frequency is 60 kHz.
The AMP-19540 enclosure has dimensions of 6.8" x 8.75" x 1". It interfaces to Galil's DMC-18xx PCI bus controller with a single, 100-pin high density SCSI cable. Signals for each axis are brought out through D-type connectors located on the AMP-19540. For applications with less than three axes, the AMP-19520 two-axis model is available. A shunt regulator option is also available.
|
|
|
This family of 1- to 4-axis 3-phase servo amplifiers supports a wide variety of motor type, power ranges and interfaces. Using Delta Tau controllers with these amplifiers is an easy and cost-effective solution. The customer can put almost any type of motor on the output.
|
|
MICRO B NET DIGITAL ®(New)
Brushless super-compact digital servodrive, 100-230 Vac power supply. Driving motor ranges up to 7.5 Nm.
The MCBNetDigital® amplifier, is a standalone full digital converter with sinusoidal wave suitable for driving Ac Brushless Servomotors, encoderor resolver feedback.Comes complete with its own internal power supply with EMC line filter, dumping circuit and detachable plug-in terminals for easy installation. The power stage is made by Igbt.
|
|
|
Two TTL signals control these drives, one for PWM and the other for Direction. Since these drives don't take analog inputs for command the need for a D/A converter for drive control is eliminated.
|
|
Servo Amplifiers : MBL / MBLX
MBL and MBLX Motion Science Series Brushless Amplifiers are cost-effective, high performance motion control solutions in compact packages. Designed for brushless motors up to 850 oz-in (2250 oz-in. peak), they are MOSFET, pulse-width-modulated (pwm) servo amplifiers providing four-quadrant control in torque and velocity modes. They are available in 16 different board-level and housed models (12 - MBL and 4 - MBLX amplifiers). MBL and MBLX Motion Science Series Brushless Servo Amplifiers are ideal for a wide range of applications, including pick-and-place, semiconductor, medical, packaging, inspection, robotics, and factory automation.
|
|
The BR & BRS SERIES are Servo Dynamics premier Brush Servo Amplifiers and are built with the same reliability and quality that you have come to expect from all Servo Dynamics products.
|
|
Control Modes Indexer, Point-to-Point, PVT
Camming, Gearing, Position, Velocity, Torque
Command Interface CANopen/DeviceNet
ASCII and discrete I/O
Stepper commands
+/-10V velocity and torque command
PWM velocity and torque command
Master encoder (electronic gearing)
Communications CAN
RS232
Feedback Digital quad A/B encoder
Secondary encoder / emulated encoder out
Analog sin/cos encoder
Resolver (-R version)
Digital Halls
I/O - Digital 12 inputs, 4 outputs
Regen Panel: external resistor dissipation
Micro Panel: internal dissipation
Accessories External regen resisitors
External edge filter
Dimensions Panel: 191 x 140 x 64 mm [7.5 x 5.5 x 2.5 in]
Micro Panel: 126 x 90 x 53 mm [5.0 x 3.5 x 2.1 in]
|
|
| ... products without technical information |
| |
Main Characteristics
The high accuracy resolvers with high internal hollow shaft diameter ALXION RES FC have been especially designed for ALXION Direct Drive motors. Two versions are available: 2 and 12 poles.
Advantages
High internal diameter hollow shaft: up to 90 mm
High accuracy: up to 1 arc minute
Two versions : 2 and 12 poles
Characteristics of the range
Based on the need for a maximal accuracy of the servomechanism, the resolvers developed by ALXION are adapted to the Motors for Direct Drive of its FC Range and ST Range and can be used advantageously in axis using STK motors. They represent a further necessary step towards the exploitation of the direct drive technology
|
|
DP0110 is the powerpack of our diagphragm pumps.
-Brushless DC Motor
-Air-Rate of 7,5l/min
-Pressure from -0,67 to 1,5,bar
-Available in 12V/24V DC
Best applications are medical products, analysers, nebulizers and other devices in which the reliable air supply plays an essential roll.
Please visit our homepage www.nitto.de .We also offer various Diaphragm pumps, Linear piston pumps, Vacuum pumps, Liquid pumps (BIMOR) Air Blowers, Cuplas, Quick Connecting Couplers and Tools.
|
|
|
|
