|
|
MODEL SERIES - GEARED MOTORISED POTENTIOMETERS
DC MOTORS WITH POT ASSEMBLY
Design -
Mech-Tex offer various assemblies in which a potentiometer with different gear ratios can be mounted in series of the gear train. Thus the geared DC motor operation can be convert in to a close loop one. Suitable mounting arrangement to mount the potentiometer on the gearhead is provided. Use of suitable reduction gear ratios can make the potentiometer rotate more or less (as per requirement) number of rotations with respect to the output shaft. Thus the reading provided by the potentiometer can be more accurate.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
|
|
|
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
|
|
|
|
FAULHABER BX4 Series 2232 - Brushless DC Servomotors
New developed compact- design
Reliable and long-lived
With the introduction of the BX4 series of brushless DC servomotors, FAULHABER once again underscores its position as an innovative market leader in highly integrated miniature drive systems. Using the latest production methods, some specially developed by FAULHABER, the company has come up with a modular design that is limited to just a few components and entirely eliminates the need for adhesive-bonded joints. Despite the compact dimensions, the new four-pole concept of the series ensures a high continuous torque of up to 12 mNm, with a flat gradient of the n/M characteristic curve.
Notable features are the smooth running characteristics and the particularly low noise level. Thanks to its electronic commutation, the brushless servo motor series is characterised by a much longer service life than mechanically commutated drives. Whilst in the basic version the commutation is provided by an external control, the flexible motor concept of the BX4 series also offers versions with integrated speed controller or integrated encoder. The encoder version is available in four different preset resolutions: 32, 64, 128, or 256 quadrature impulses per revolution. It is available with an optional line driver and differential output signal. In addition to mechanical speed adjustment, the new planetary gearheads of the 22F series also allow a temporary torque increase up to 1500 mNm. Designed with one to four stages, the precision gearhead in steel 21 offers finely graduated reduction ratios, and the diameters can be combined in conformity with the BX4 drives.
|
|
The RDxx is a complete positioning unit which integrates a DC gear-motor, a drive, an encoder and a controller. Profibus, CANopen and RS485 interface are available.
The Rotadrive is capable to move axis to target positions by means of ramps and with backlash compensation.
Thanks to its small dimensions (58x125x105 mm) RDxx can be mounted directly on spindle with Ø14mm and fixed by means of the collar and the anti-rotation pin.
Typical applications of this product is on tool-changers, gauges and packaging machinery.
|
|
| ... products without technical information |
| |
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
|
|
|
|
Integral, high torque density servo drive with Canopen interface and absolute multiturn positioning.
Universal 350 and 550 Vdc bus supply
2.5-9 Nm torque, 5000 rpm max
Multi axes machines
Direct drive without gearbox
Intrinsic multiple electric gear
Built in single turn and multi turn 4096 turn + 16 bit absolute encoder, 1 arcmin accuracy
No zeroing cycles
CanOpen DS301, DSP402v2.0 compatible
Double insulation
Built in RFI filter, Class B
IP 68 protection
The new TorqueWire series of integral servo systems creates a different approach to complex automatic machinery architecture. Torquewire motors are complete, self sufficient servo axis building blocks which allow the design, integration and operation of large multi axis systems with minimum hardware and surprising ease.
The TorqueWire motor systems consist of an advanced, high performance rare earth brushless servo motor, a DSP based, high voltage interpolating servo drive and a single or multi turn absolute encoder, all assembled in a very compact IP 68 protected frame.
|
|
PANdrive PD-163-42
Description
42mm BLDC motor with integrated controller/driver
The PD-163-42 is a full mechatronic solution including a 42mm brushless DC motor (NEMA17). It combines a convenient BLDC controller/driver electronic (TMCM-163-42) with a range of different motor types with internal HALL sensors. The PD-163-42 offers two motor torque options and can be controlled via RS232 or RS485 interface. The power supply is connected via flat connectors and the interface and the multi-purpose I/Os can be connected via high density JST connectors. It integrates a position regulator and a ramp generator. The integrated ramp generator provides for parameterized smooth positioning and supports an external switch as an absolute position reference.
|
|
DC Brush Servo Motors
DC Brush Servo Motor Platform 2100
- 2105 Servomotor
- 2110 Servomotor
- 2115 Servomotor
- 2120 Servomotor
- 2130 Servomotor
DC Brush Servo Motor Platform 2600
- 2605 Servomotor
- 2610 Servomotor
- 2615 Servomotor
- 2620 Servomotor
- 2630 Servomotor
- 2640 Servomotor
DC Brush Servo Motor Platform 3500
- 3505 Servomotor
- 3509 Servomotor
- 3515 Servomotor
- 3528 Servomotor
DC Brush Servo Motor Platform 4100
- 4101 Servomotor
- 4102 Servomotor
- 4104 Servomotor
- 4106 Servomotor
DC Brush Servo Motor Platform 40TT
- Drop in replacement for the discontinued Kollmorgen* TT Servo Motors
- Matched Windings, Connections, and Mechanical Interface
- Heavy Duty Steel Housing for Demanding Service
- Full Performance Testing Included
- Resonably Priced, Excellent Value
- Reliable Operation in Sever Service
|
|
The new series of servo motors SM2A with integrated motor can be easily programmed through EVER's windows PC based user friendly development environment called ATOMIC.
The SM2A series are constructed with a high protection degree of IP65 and are equipped with reliable connectors. Other features are: AC power supply, fieldbus CANbus or serial RS232/485, optoisolated inputs and outputs, an encoder for the closed loop control of torque, velocity and position (optional), The motor section is made of magnetic Low Loss material and has a holding torque from 3,4 to 12,5 Nm.
|
|
|
The Series A6 is a microprocessor based controller for positive, negative, and differential pressure as well as velocity and flow. The Series A6 has a 316L Stainless Steel cover to meet clean room and other high purity and wash down requirements. It features (2) 8A SPDT relays for control and an optional digitally scaleable 4-20 mA output. The associated software package allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display or uploaded using an Opti Link™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications.
|
|
Regulated switch mode power supplies from 0.3 to 40 A for industrial applications
Description
Modular and optimum power supplies for networks single-phase 100-240 V
Output voltage: 5, 12, 24, 48 V -7 W-145 W
Highly compact sizev
Wide voltage range
Fixing by screw or on omega rail
Universal power supplies, for networks single/3-phase 100-500 V
Output voltage: 24 V and 5 to 15 V by converter modules 48 V/72 W-960 W
Integrated energy reserve
6 product references from 3 A to 40 A
Fixing on omega rail
Advanced diagnostics by LED and relay contact
Integrated anti-harmonics filter
Function modules to respond to problems of network cuts, 24 VDC circuit overloads and availability
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Modern Technology in Miniature Format
High efficiency
Unique temperature supervision
|
|
- High Performance at Low Cost
- DC Servo-Motor Controller Supplies up to 30 W
- 20 MHz Encoder Input for High Speed & Resolution
- Macro Programmable Stand-Alone Functionality
- Network Capability for Multi-Axis Applications
- Non-Volatile EEPROM for Macros and Parameters
- Digital I/O Lines (TTL)
- Motor-Brake Control
- USB and RS-232 Interface
- Optional Joystick for Manual Control
- Works with All PI Micropositioners
The latest generation Mercury™ C-863 servo motor controller is even more powerful and versatile than its predecessors. Easy data interchange with laptop or PC is possible via the USB interface. The RS-232 interface provides for easy integration in industrial applications. The compact design with its integrated amplifier makes it ideal for building high-performance, cost-effective micropositioning systems.
|
|
Control electronics for DC and EC motors
1 and 4-quadrant servoamplifiers
Positioning control units
- EPOS P
- EPOS 2
Characteristics
- Matched to maxon motors
- Comprehensive range of cables and accessories available
- Customization if required
|
|
| ... products without technical information |
| |
Power supply: 24 V DC
Marking: CE, cUL
With microstep driver.
Standard type
Mounting size: 42 mm and 60 mm
Max. permissible torque: up to 1.66 Nm
High-Torque type
Mounting size: 20, 28 and 42 mm
Max. permissible torque: up to 0.42 Nm
High-Resolution type
Mounting size: 28, 42 and 60 mm
Max. permissible torque: up to 2.3 Nm
Geared types:
Taper hobbed gear: max. holding torque up to 4 Nm, permissible torque 0.2 Nm - 4 Nm, backlash 0.167° - 1°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 8 Nm, permissible torque 0.2 Nm - 8 Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 8 Nm, permissible torque 3.5 Nm - 8 Nm, 2 gear ratios of 1:50 and 1:100.
|
|
PMC Series Stepping Motors
The PMC series combines a high torque miniature 5-phase stepping motor with a board-level, credit card sized driver.
- DC input
- 1.10 in frame size
- Maximum holding torque from 0.3 lb-in to 17.5 lb-in
- Permissible speed range from 0 to 2500 r/min
|
|
|
The series A3 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A3 differential pressure controller includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the LCD display or uploaded using an OptiLink™ programming key. The LCD also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A3 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance at a lower price.
|
|
|
The series A4 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A4 differential pressure controller includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display or uploaded using an OptiLink™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate many applications. Compared to other mechanical products, the Series A4 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance at a similar price.
|
|
| ... products without technical information |
| |
|
|
