|
|
|
These NEMA frame DC motors include permanent magnet designs through 5 HP and wound field designs through 500 HP designed for adjustable speed operation from SCR controls. Applications include conveyors, extruders, winders, printing presses and metering pumps. Most designs are constructed so a tachometer may be added for closed loop applications. Permanent magnet and wound field designs for 90 or 180 VDC have a 20:1 constant torque speed range.
|
|
|
Our explosion-proof D.C. motors, series « S », were designed according to european standards CENELEC and are manufactured in order to offer the maximum of safety and reability for all services in explosive atmospheres.
|
|
|
Baldor * Reliance Explosion Proof DC motors are designed and constructed to withstand an explosion of a specified gas or vapor within it and to prevent the ignition of the area surrounding the motor. These motors offer the benefits of Baldor * Reliance DC technology and experience in a tough and demanding explosion proof environment.
|
|
|
|
|
|
Our explosion-proof D.C. motors, serie "S", were designed according to European standards' CENELEC and are manufactured in order to offer the maximum of safety and reliability for all services in explosive atmospheres.
Our motors were certified for the following gas explosive atmospheres:
*S71 range: Group IIB+H2 (T4 or T5) - 2G Category - Zone 1
*S80 to S160 range: Group IIB (T4 or T5) - 2G Category - Zone 1
Our motors are certified for the classes of temperature of surface: T4 (135°C) T5 (100°C)
Our "S" type motors are conceived with compensated poles:
*2 or 4 (except S 71 type: 2 salient poles)
*Available shaft heights are as follow: 71, 80, 90, 100, 112, 132, 160
*Protection: up to IP 55 (except S 71 range: IP 44)
*Cooling: IC 0141 · Frame and flanges in cast iron (except S 71 range: Aluminium)
*ventilator in aluminium
*ventilator cap in cast iron (except S71range : Aluminium)
*Terminal box in cast iron (except S 71range: Aluminium)
*Life lubricated bearings: life expectancy is a function of the shaft load and the speed
*Shaft in "XC 48" steel
*Insulation and components: F Class minimum
For motor form IM 3011 (V1): Dome of protection
|
|
MODEL SERIES - DC28
PMDC GEARED MOTOR
Design - Motor DC28 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in combination with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead
can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output
torque required is low in an economical model (GB7P). Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done on special request.
|
|
MODEL SERIES - DC30
PMDC GEARED MOTOR
Design - Motor DC30 is a carbon brush DC motor which is used in combination with many MechTex gearheads. The standard gearheads used in conjunction with this motor are GB2,GB5P, GB5H, GB38OCP, GB3, GB4, GB7,GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or
steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
MODEL SERIES - DC33
PMDC GEARED MOTOR
Design - Motor DC33 is a carbon brush DC motor which is used in combination
with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can
be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered
gears damp the noise. Case hardened steel gears are always on the output
for load considerations. Complete poly acetal gears are used when the output
torque required is low. Linear drive is possible with gearhead GB4,GB7,GBW
with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be
done only on special request.
|
|
MODEL SERIES - DC25
PMDC GEARED MOTOR
Design - Motor DC25 is a precious metal brush DC motor which is used in combination with many Mech Tex gearheads. Conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8. Depending on the application, o/p speed, load applied, etc., the standard gearheads used in the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4, GB7 with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
MODEL SERIES - GEARED MOTORISED POTENTIOMETERS
DC MOTORS WITH POT ASSEMBLY
Design -
Mech-Tex offer various assemblies in which a potentiometer with different gear ratios can be mounted in series of the gear train. Thus the geared DC motor operation can be convert in to a close loop one. Suitable mounting arrangement to mount the potentiometer on the gearhead is provided. Use of suitable reduction gear ratios can make the potentiometer rotate more or less (as per requirement) number of rotations with respect to the output shaft. Thus the reading provided by the potentiometer can be more accurate.
|
|
Miniature Coreless DC Motor
Diameter Ø 4 to 18
Voltage 3 to 12 v
Gearbox Spur or Planetary gear box is available.
Feedback device : Encoder, Taco generator are available
Application
* Locomotion
* Electrical Key Lock system
* Robot
* Medical pump
* CCTV
|
|
|
Canon Precision's coreless motors create high power output from a small package. Their low moment of inertia provides quick response rates and high controllability. Our coreless motors have demonstrated their high reliability in many applications including cameras and pumps. Customization, like the addition of reduction gears, is available.
|
|
Permanent magnet DC motors available in sizes ranging
from 30 up to 2500 W (1/25 up to 4 HP).
* MP 56 :
Permanent magnets
N° of pole: 2
Duty: S1 - S2 - S3
Protection class:
IP2O - IP44Power supply:
12V - 24V - 36V - 48V - 180V
Power output: from 15W up to 200W
Brush housing: totally enclosed / fast replacement / external column
Electromagnetic brake available
* MP 80 :
FEATURES :
Permanent magnets
N° of pole: 2-4
Duty: S1 - S2 - S3
Protection class:
IP2O - IP44
Power supply:
12V - 24V - 36V - 48V - 180V
Power output: from 200W up to 750W
Brush housing: totally enclosed / fast replacement
Electromagnetic brake available
* MP 100 :
FEATURES :
Permanent magnets
N° of pole: 4
Duty: S1 - S2 - S3
Protection class:
IP2O - IP44
Power supply:
12V - 24V - 36V - 48V
Power output: from 550W up to 1500W
Brush housing: fast replacement
Electromagnetic brake available
|
|
|
Motor selection is made easy with the wide variety of products available from AMETEK. Many different motor families are available in standard configurations. These motors range in torque from 0.8 oz. in. (.568 Ncm) to 50.0 oz. in. (35.5 Ncm). Voltage options are from 6.00 VDC to 76.40 VDC.
|
|
Modular, high quality drive solutions, specially designed for
a variety of industries and applications such as:
• Mechanical handling
• Medical industry
• Industrial automation
• Door automation
• Automotive
• Office equipment
• Pumps and Compressors
• Packaging and food industry.
As a premier supplier of high precision drive
technology, Dunker offers four product groups:
• BLDC motors
• BRDC motors
• AC motors
• Geared motors
Standardised motors and modular accessories
are available with a high degree of
flexibility to address specific
requirements.
The drive’s power ranges from 1 to
300 Watts. The motor range is further complemented by
high quality components:
• Planetary and Worm gearboxes
• Optical and magnetic encoders
• Tachogenerators
• Electro-magnetic brakes
• Electronic control systems.
Dunkermotoren offers cost-effective and reliable solutions.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
|
DC motors: STOCK SERVICE Programm can be purchased in small quantities from 1 W up to 100 W and customized versions upon receipt of your firm order, we can produce the motor you need,
|
|
|
|
|
|
Range between 1 and 200 W with a voltage of 12, 24 or 48V
Diameter between 24 and 63mm
Rated speed between 2000 and 4000 rpm
Lifetime of 3000 to 4000 hours
Ability to incorporate: CEM filter, optical or magnetic encoders and brakes
Comply with European Directives 73/23/CEE low voltage and EMC 89/336 CEE
Gearbox range : A nominal torque up to 5Nm with over 10 versions (ovoid, double ovoid, special for peristaltic pumps,65x65 mm square 5Nm …).Available with various output shafts and mechanical interfaces for a perfect adaptation.
90 º gearbox : Designed for applications where space and noise is critical. Very quiet
Planetary gearbox : : Up to 25 Nm nominal, high efficiency, high reduction ratios, available in 1,2 and 3 stages, a compact design with diameters of 42 and 52 mm.
Specially designed for the following markets :
Water treatment: Pumps, valves, pool equipment
Medical: Laboratory equipment, medical pumps, radiology
Access Control: Automatic doors, gates, ramps
Air Conditioning: gas valve, teams HVAC, solar panels
Industrial Machinery: Automatic movements, robotics
|
|
High efficiency DC commutator motors can be used as traction motors, to drive hydraulic pumps for various applications, particularly in material handling and the automotive and transport industries, and for other applications, such as winches, industrial cleaning machines and marine applications.
|
|
Johnson Motor Permanent DC (PMDC) motors Ø 23.0 ~ 25.9 mm
Dimensions: Ø 24.2 x 30.5, shaft Ø 2 mm
Supply nominal: 21 VDC
Torque:
@ stall 44.11 mNm
@ max. efficiency 7.47 mNm
@ max. power 22.05 mNm
@ constant 5.105 mNm/A
Speed:
@ no load 31090 rpm
@ max. efficiency 25824 rpm
@ max. power 15545 rpm
Max. current:
@ no load 0.32 A
@ stall 7.67 A
@ max. efficiency 1.56 A
@ max. power 4.00 A
|
|
Johnson Motor Permanent DC (PMDC) motors
Dimensions: Ø 80 x 82.4, shaft Ø 8.005 mm
Supply nominal 19.2 VDC
Torque:
@ stall 1469 mNm
@ max. efficiency 289.33 mNm
@ max. power 734.35 mNm
@ constant 10.953 mNm/A
Speed:
@ no load 18800 rpm
@ max. efficiency 15100 rpm
@ max. power 9400 rpm
Power:
@ max. efficiency 456.66W
@ max. power 721.49 W
Max. current:
@ no load 8.587 A
@ stall 142.674 A
@ max. efficiency 35.001 A
@ max. power 75.63 A
|
|
DC MOTORS
- Battery powered:
MBT : Low voltage enclosed DC motors
- Network powered:
MFA-MF : Enclosed DC motors - Magnet inductor (MFA) or wound (MF)
LSK : Open DC motors - Wound inductor
MS1-MS2 : Open DC motors - Wound inductor
Guaranteed availability - Please determine reception date!!!
|
|
|
Permanent Magnet Motors and Servo Motors - Extremely quiet running | Optimum protection (IP 65 optional) | Highest reliability | Custom designed for your application
|
|
Key Attributes and Characteristics:
- Frame sizes from 8mm (0.31 in.) to 35mm (1.38 in.)
- Speeds up to 12,000rpm
- Torque range of 0.64 mNM (0.09 oz. in.) to 115 mNm (16.3 oz. in.)
- Low power consumption ratings
- Ironless rotor
- Central stator magnet
- Compact bearings
- Precious metal commutation system
- Copper-graphite commutation
Advantages:
- High acceleration
- High efficiency
- Low losses and low electromagnetic interference
Portescap Brush DC motors can be customized with options such as gearboxes, connectors and cables, custom coil designs and more.
|
|
BISON 26 SERIES
Motors are available in 12, 24, or 90 voltages.
Optional Features / Accessories
• Die Case Junction Box with gasket
• Terminal Block and ground screw.
|
|
|
PMDC 1/10 Hp IEC DC Motor - 1800/3600 rpm, continuous duty, at 1.4 form factor power supply. Dynamically balanced armatures for low vibration and noise reduction. Large brushes for long life. Premium motor duty ball bearings
|
|
BISON 32 SERIES
Motors are available in 12, 24, 90, or 180 voltages. Limited models available with a C-Face adapter.
|
|
|
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
|
|
|
|
|
|
FAULHABER BX4 Series 2232 - Brushless DC Servomotors
New developed compact- design
Reliable and long-lived
With the introduction of the BX4 series of brushless DC servomotors, FAULHABER once again underscores its position as an innovative market leader in highly integrated miniature drive systems. Using the latest production methods, some specially developed by FAULHABER, the company has come up with a modular design that is limited to just a few components and entirely eliminates the need for adhesive-bonded joints. Despite the compact dimensions, the new four-pole concept of the series ensures a high continuous torque of up to 12 mNm, with a flat gradient of the n/M characteristic curve.
Notable features are the smooth running characteristics and the particularly low noise level. Thanks to its electronic commutation, the brushless servo motor series is characterised by a much longer service life than mechanically commutated drives. Whilst in the basic version the commutation is provided by an external control, the flexible motor concept of the BX4 series also offers versions with integrated speed controller or integrated encoder. The encoder version is available in four different preset resolutions: 32, 64, 128, or 256 quadrature impulses per revolution. It is available with an optional line driver and differential output signal. In addition to mechanical speed adjustment, the new planetary gearheads of the 22F series also allow a temporary torque increase up to 1500 mNm. Designed with one to four stages, the precision gearhead in steel 21 offers finely graduated reduction ratios, and the diameters can be combined in conformity with the BX4 drives.
|
|
The RDxx is a complete positioning unit which integrates a DC gear-motor, a drive, an encoder and a controller. Profibus, CANopen and RS485 interface are available.
The Rotadrive is capable to move axis to target positions by means of ramps and with backlash compensation.
Thanks to its small dimensions (58x125x105 mm) RDxx can be mounted directly on spindle with Ø14mm and fixed by means of the collar and the anti-rotation pin.
Typical applications of this product is on tool-changers, gauges and packaging machinery.
|
|
|
|
