|
|
MODEL SERIES - DC25
PMDC GEARED MOTOR
Design - Motor DC25 is a precious metal brush DC motor which is used in combination with many Mech Tex gearheads. Conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8. Depending on the application, o/p speed, load applied, etc., the standard gearheads used in the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4, GB7 with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
24A Series Permanent Magnet DC Motor
Horsepower: 1/50 to 1/7 HP
Rated Torque: 8 to 24 oz-in
Speed: 2500 to 11,500 RPM
33A Series Permanent Magnet DC Motor
Horsepower: 1/16 to 1/3 HP
Rated Torque: 34 to 134 oz-in
Speed: 2500 RPM
33A Series Metric Permanent Magnet DC Motor
Motor Watts: 42 to 244 W
Rated Torque: .24 to .86 Nm
Speed: 1725 to 3000 RPM
42A Series Permanent Magnet DC Motor
Horsepower: 1/4 to 1/2 HP
Rated Torque: 101 to 180 oz-in
Speed: 2500 RPM
|
|
|
Our smooth, long-lasting DirectPower Plus motors are available in a range of voltages and torques to met your needs. Dynamically balanced armatures and non-contact ball bearings ensure a smooth performance. Durable totally enclosed, non-ventilated construction (TENV) and replaceable brushes help extend product life-cycles. And, for extra power and durability choose our DirectPower Plus motors.
|
|
The permanent magnet brushed dc motors offered here have been designed and wound to satisfy applications calling for a power range of 1-100 watts. 1.5v-28v voltage range is available where appropriate.
Windings have been chosen to offer speed variations where noise, life or current may be critical. If you can't find your exact requirement here, motors can be wound to your precise specification.
|
|
|
The D.C. permanent magnets motors EC (5 sizes: diameter 42, 52, 65, 80, 110 mm) are characterised by their high start torque, high quality balancing and low noise levels. Available power ratings from 30 to 800 W S2, low voltage power supply, 12 or 24 Vdc.
|
|
|
Introducing Bison's new line of Permanent Magnet DC motors. Available with input voltages of: 12, 24, 90, and 180V. Output power from : 1/53 hp to 1/9 hp. Multiple mounting options. High pressure die cast end shields are machined for precision alignment and bearing fit, allowing accurate brush tracking and minimal vibration.
|
|
Tensions 12 or 24 mini V.C.C., 50,110 or 200 V.C.C.
Special tensions on request (PM 50/60 - 18ov. maximum).
Engines Classifies “ F” – on closed rolls of the dice,
lubricated with life. All with 2 directions of rotation.
Reducers tight and lubricated with life. Entirely on
rolls of the dice, endless screw out of treated steel and polished. Coil
in composite or bronze on request. Assembly
multiposition.
Flexible connections PVC 30cm.
Details of the Performances Engine Page 70.
|
|
A range of 12 to 180 V DC motors with Power Outputs of 25 to 750 watts.
Including:
PM36 Custom permanent magnet motors up to 75 watts.
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts
minimum order quantity: 100 units per annum
|
|
Overview:
The GE permanent magnet DC motor is dependable, reliable and flexible. Designed for low maintenance, these PM motors are intended to provide years of worry-free operation. Available from stock, these adjustable speed drive DC motors combine exceptional value and rugged construction with immediate availability for a multitude of applications.
Voltage : 90 and 180V (for use with Type K power supply)
Ratings : 1/4 to 3 HP
Enclosure : Totally enclosed
Service Factor : 1.0
Ambient Temp : 40°C
Insulation : Class F
Features and Benefits
- Constant pressure brush mechanisms improve brush and commutator life
- Large, shielded ball bearings are pre-lubricated
- C-face endshields are standard on all models, while optional bolt-on bases provide additional mounting options
- Adaptable with customer supplied tachometer kits for GE 5PY59JY or Servo-tek tachometers
- UL and CSA recognized
- Custom ratings are also available for high volume applications
|
|
GE Permanent Magnet Standard
The GE permanent magnet DC motor is dependable, reliable and flexible. Designed for low maintenance, these PM motors are intended to provide years of worry-free operation. Available from stock, these adjustable speed drive DC motors combine exceptional value and rugged construction with immediate availability for a multitude of applications.
|
|
GE Permanent Magnet Custom:
GE permanent magnet DC motors provide rugged construction features. Custom shaft configurations, mounting face, conduit boxes, motor leads and footprints are available. Designs for battery-powered and rectified AC are also available.
GE Permanent Magnet Standard:
GE permanent magnet DC motors are dependable and flexible. Designed for low maintenance, these motors are intended to provide years of worry-free operation. These adjustable speed drive DC motors combine exceptional value and rugged construction.
GE Permanent Magnet Washdown:
The enclosures of these motors are designed to offer greater moisture and corrosion protection than totally enclosed motors, making them suitable for washdown applications.
|
|
Voltage: 180 V DC, 24 V DC
Other voltages from 24 V up to 250 V DC on request
Power: 40 - 350 Watt
Speed: 2000, 3000 min-1
Other speeds on request
Type of protection:
Type EP 0, EP 1 und EP 2 with flying leads, Standard IP 44
Type EP 0, EP 1 with terminal box, Standard IP 44
Type EP 2 with terminal box, Standard IP 54
|
|
4-Pole Electrical Designs for High Current Capability
Ball Bearing Construction for Heavier Load and Long Life Capability
High Efficiency Permanent Magnet Designs
Rugged Welded Clip for Magnet Retention, Not Glued
Castings Designed for Maximum Heat Dissipation
1/4 HP - 4HP, up to 5000 RPM, 12-72 VDC
|
|
MODEL SERIES - DC32
PMDC GEARED MOTOR
Design - Motor DC32 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7,GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or
steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4,GB7,GBW with M6 x 1
mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
MODEL SERIES - DC42/ DC52
PMDC GEARED MOTOR
Design - Motor DC42/DC52 is a heavy duty carbon brush DC motor which is used in combination with GBW gearhead only. Gearhead GBW contains heavily loaded steel gear wheels. The spur gears are fixed on steel spindles which are hardened and polished to a mirror finish & rotate in sintered bushings. The thick output shaft rotates in robust sintered bushings. All the gears are housed in between metal plates & closed by plastic dust cover. All bearings are permanently lubricated and therefore require no maintenance. Linear drive also possible on request.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
