|
|
| The MN-2PS40 is an unregulated, linear DC power supply that provides 40VDC to the ControlPoint network. This supply is ruggedly constructed, with de-rated components to ensure long life and reliable operation; built-in fusing prevents damage due to prolonged overloading or short circuits. The extruded case provides various mounting configurations. |
|
Advantage Lincoln
• Independent arcs. Starting or stopping one Multi-Weld doesn't affect the welding of the others.
• The Multi-Weld 350 is capable of continuous operation at 350 amps in 122°F (50°C) air temperature.
• No control cables are needed. Single weld cable output from the power source to one or several Multi-Weld 350s.
• Controls are located close to the operator for quick access.
• High efficiency design uses less than half the power of other grid systems.
• Lincoln Chopper Technology™ for quality welds with instant control of the arc for superior welding results.
• Constant voltage (CV) for MIG or flux-cored wire welding.
• Constant current (CC) for stick welding or arc gouging.
• Additional stick welding controls include hot start, arc force, electrode type selection (E7018 and E6010).
• Arc gouging capability with a single Multi-Weld 350 and up to 5/16" (8.0mm) electrode, or with paralleled units for up to 700 amps of power using a 3/8" (9.5mm) electrode.
• Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.
• Three-year warranty on parts and labor. |
|
DIN rail power supplies with high performance and compact dimensions, in linear or switching technology. For instance, the 240W/24V/10A model come with PFC, 3-phase wide range input and are only 125 x 125 x 125mm.
- DC output: 12V or 24V fixed, 12...14V, 24...27V, 48...56V adjustable
- AC input: 230V or 90..264 (wide range)
- Powers from 6W to 960W
- Linear and switching mode types
- PFC
- 3-phase variants
- Remote sense
- Power fail output |
|
| MPD now offers a full range of standard DIN-Mount AC/DC power supplies. Ranging from 45W to 240W (upcoming releases will extend the line to 960W) these units offer high power density, universal AC inputs, full international approvals (including UL 508), and DIN Rail mounting capability. If your equipment requires a rugged, high performance industrial power supply and the convenience of DIN rail mounting; we have a low cost power supply to fit your needs. |
|
Switch mode units for DIN-rail mounting.
18 - 30 - 60 and 120 W
Supply voltage: 90-265 VAC
Output ranges:
5 DC - 3.5 A , 12 VDC - 1.5 A, 2.5 A or 5 A
24 VDC - 0.75 A, 1.25 A, 2.5 A or 5 A |
|
When it has been decided that a central battery system is the most suitable system of emergency lighting for a particular site, the designer needs to give consideration to the following:
- Lighting design
- Type of system
- System control & mode of operation
- Battery type
- System sizing
- Battery room ventilation
More informations available: |
|
Compact and powerful laboratory power supplies for applications in R&D, schools, workshops and test environments. With analogue interface, current/voltage seperately adjustable from 0...max.
- Voltages from 16V to 150V
- Currents from 2,5A to 40A
- Powers from 80W to 640W
- Analogue interface
- Illuminated LCD or LED displays
- Additional outputs
- Parallel or series connection
- High stability
- Linear and switched mode versions (with wide range input) |
|
The PM20D bench top power supply provides a stable well
regulated output controllable from 20 V to 2000 V. It has been
designed primarily for photomultipliers with the particular
needs of the laboratory or research specialist in mind. The
polarity is determined by selecting either the positive or
negative output SHV socket mounted on the rear of the unit.
The dual socket output guards against accidental polarity
reversal. The unit offers additional safety features such as
protection against overload, flashover and short circuit. Every
unit is supplied with a set of mating connectors. |
|
VIPAC Low Profile - 50-900 Watt Power Supply
The VIPAC family of power systems is a new class of user-defined, modular power solution. It incorporates pre-assembled and tested front ends, Maxi, Mini and Micro DC-DC converters, a choice of output connections and mechanical platforms. |
|
- Input fuse protection
- 100 % thermally protected.
- Floating output, continuously short circuit and open circuit
proof. |
|
| Vibra-Metrics designs and manufactures a wide variety of single and multi-channel low noise, portable battery powered accelerometer power supplies, as well as line powered units designed for lab use, rack mount, and a variety of applications. Many connector options are available to insure the flexibility you would expect from V-M products. For specifications click any series number. |
|
EFS 8373
Continuous voltage power supply 40W
Can be adjusted from 0 to 600 veff in 4 ranges under 90W |
|
250-400 Watt
High Density Switching Power Supplies
Featuring:
- Small Size of only 6.8 x 3.8 x 1.35"
- Ideal for Front End Applications
- Optional DC Input Models
- Full Featured Status 8: Control
- Internal OR'ng Diodes
160 Watts
2.0 x 4.0 x 1.06" Open Frame
Featuring:
- Universal AC Input
- Medical & Industrial Safety Approvals
- 5-48VDC Single Outputs
- 12V Auxiliary Fan Output
- Optional 3 x 5" Footprint Models
- RoHS Compliant |
|
Specifications:
Power:
Input voltage range: 90 - 264 VAC
Output voltage:
+5VDC @ 2A,
-5VDC @0.2 A,
12VDC @1 A,
-12 VDC @ 0.3 A
Input frequency: 47 - 63 Hz
Inrush current cold: 20 A @ 110 VAC, 40A @ 220 VAC
Hold-up time: 16 ms
Raise time: 500 ms
Overload protection: power limit
Short protection: auto- Recovery
MOSFET design
Built-in line filter
Meets FCC, CE, TUV
Meets UL478 and CS
Fast type FUSE 2A/250V
Bus Interface PC/104 Standard Compliant
Connector
3-pin AC input
6-pin DC output
Dimensions 90(L)x96(W)mm (3.54" x 3.78")
Weight 120g
Operating Temperature 0°C ~ 60°C |
|
Esispower provides several kinds of Switch Mode Power Supplies for specifics applications.
Esispower designs non-standart SMPS's according to customer requirements when it is not available in the standard product range. |
|
The DP Series of switching power supplies utilizes advanced component
and circuit technologies to deliver the industry's smallest 200 Watt DC/
DC power supply. Built to meet 1U height considerations, the U-Frame
package measures only 3.30 x 5.00 x 1.50". DP200 models offer
48 VDC input with flexible output configurations and compliance to
worldwide safety and EMC standards.
Features include:
- 200W compact high-density models
- Active load current share
- 36-72 DC input
- Ruggedized U-Channel construction
- RoHS compliant
- Includes OR-ing diode for N+1 parallel operation
- International regulatory approvals |
|
The iX Series II represents a new generation of AC and DC power source that addresses increasing demands on test equipment to perform more functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the iX Series II systems are capable of handling complex applications that have traditionally required multiple instruments.
The sleek integrated approach of the iX Series II avoids the cable clutter that is commonly found in AC test systems. The i/iX Series II is rackmountable with a 4U chassis design. All connections are made internally and the need for external digital multimeters, power harmonics analyzer and current shunts or clamps is completely eliminated. Using a state of the art digital signal processor in conjunction with precision high resolution A/D converters, the iX Series II provides more accuracy and resolution than can be found in some dedicated harmonic power analyzers. Since many components in the iX Series II are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system.
For less demanding applications, the Compact iX Series provides similar output and transient capabilities as the iX Series II, as well as basic measurements. |
|
Performance:
The high-quality design of Comdel's XDC 1000 assures ultra reliability, while the small size fits easily into your system. What's more, with the XDC's flexible options and controls, you don't need to purchase a new power supply every time you make a change in your system. Current and voltage control capabilities are standard with each supply.
Applications:
Comdel's XDC is the ideal supply for reactive PVD sputtering, DC Bias and hard-coating applications.
Features:
Compact, lightweight, 3 1/2" rack-mount DC generator
Accurate output control by voltage or current
Self-limiting circuitry that eliminates short-circuit failures
Low stored energy that reduces arc damage
Front Panel, continuously variable control of output voltage and current
Calculated MTBF: 30,000 hrs. minimum |
|
Power Supplies - diverse safety features
For the supply of power to various electric and electronic devices. where differing electrical and mechanical requirements have to be met.
WAGO ELECTRONICC offers a comprehensive range of power supply units for a wide range of applications. The following functions are available:
Constant voltage source
Power supply units |
|
| The PVSE 400 is a economical three-phase switch power pack with highly precise output voltage for all requirements of the automatic control engineering. Concentrated on the nuclear tasks tension and of supply of electricity. Highest power reserves of up to 200% owing to power Boost. The Top Boost supplies in the event of an error up to 60 A over rated current, this makes possible a economical securing with automatic circuit breakers. Available as stabilized or semistabilisierte variant, with output rated voltage 10, 20 and 40 ampere, optionally also with DC OK signaling and active starting current delimitation. |
|
50~100 Watt
External / Desktop Power Supplies
The LS Series of switching power supplies offer portable power solutions
with Universal AC input and international safety approvals, making them
ideal for applications requiring external power.
- From 50W up to 150W output
- Specialized desktop power adapters
- Universal AC input
- RoHS compliant
- Single output voltage: 12V, 19V or 24V
- International regulatory approvals
|
|
| The WSX43P is a DIN rail mounting power interface board which extends the versatility of the WSX43B Precipitation Detector by proving mains power interface, adjustable set-point temperature and higher power relay output. |
|
|
|