|
|
|
Bewo deburring machines can be supplied with a manual or automatic feed. The automatic feed is the most popular choice, allowing the deburring machine to be installed in-line with the full range of Bewo automatic circular saws, saving many man hours and making automatic cycling possible. The DB-90 has 300 mm diameter brushes with a length of 600 mm. Bewo deburring machines are designed to deburr round, square and rectangular tube.
|
|
|
|
|
|
SA-76NC + BDB-70
Extreme Speed Tube Cutting and Deburring machines
HIGH PRODUCTION, FLEXIBLE AND i2® SYSTEM
SA-76NC Metal saw machine
BDB-70 Tube deburring
SA-76NC tube sawing machine can connect to BDB-70 double tube ends duburring machine. Besides the high speed tube cutting functions of SA-76NC, SA-76NC + BDB-70 has extreme speed in pipe cutting, even has high speed in loading, feeding, transporting and tube deburring.
The powerful and competent tube cutting line is capable of cutting various shapes of profiles such as round tube, rectangular, square and oval tube. As well as the working capacity of SA-76NC + BDB-70, the round tube can up to 80mm, and square tube is 70x 70mm. High speed metal saw machine.
Keywords
Pipe Benders,Tube Benders,Tube Bending,tubing bender,bending pipe,Pipe Bending,Bending pipe Machine,Tube Bending Machine,Pipe Bending Machine,tube cutting,metal saw,Circular Saw,Sawing Machine,tube cutter,pipe cutting,pipe cutter,circular sawing machines,Saw blades,chamfering machine,deburring machine
|
|
General description:
Also in our double head end deburring equipment line is our Abtex tube deburring system. The system pictured is a hopper fed unit that deburrs both ends of tubes at a rate of up to 100 tubes per minute. Adjustments are easily made for varying tube dimensions. Once the system is activated, the hopper aligns the work pieces and directs them into the brushes. De-burred tubes exit the back of the deburring machine directly into boxes for shipment or into work bins for easy transport to other work stations. The Abtex tube deburring system is built to customer specifications.
|
|
The EMB patented technique of pre and final assembly of cutting rings reduce assembly time and costs whilst providing superior "leak free" characteristics and reliable reproducible assembly results. The entire process of tube preparation untill the final coupling run like clock work in no time at all, thank to our investment in "state of the art" machinery.
Our SPS controlled assembly units, in paricular, provide supreme functional and cost effective performance.
|
|
Machine suitable for removing INSIDE and OUTSIDE “burrs and sharp edges” that are normally created during cutting operations.
It is possible “deburr” round, oval, square, rectangular tubes, irregular shaped profiles made of iron, stainless steel, aluminium and plastic materials.
Machine is supplied ready to work with following STANDARD EQUIPMENT: adjustable universal holder for workpieces, motors with voltage 400V/50Hz, sevice keys, instruction book and CE conformity declaration.
|
|
DEBURRING MAX 42x4 mm
MATERIALS AISI 316 TI - ST 37.4
WEIGHT 28 KG
STANDARD VOLTAGE 230V 50Hz 1PH
MOTOR POWER 0.18 KW
DIMENSIONS L x D x H 350 x 350 x 320 mm
REVOLUTIONS/MINUTE 50
INT./EXT. DEBURRING TOOL 6-42 mm included
|
|
For treatment of tubes and sticks ends
Abilities
Deflashing of round tubes and sticks with diameter from 10 mm up to 48 mm
|
|
| ... products without technical information |
| |
Descriptive :
Automatic tube loading with 3 versions :
Slope loader
Belt loader
Profils loader
Automatic alimentation of mandrel.
Unloader 2 positions.
The plate of work in the main part of the punching machine and all the tooling are on the plate.
Possibility to have 2 or 3 differents plate.
So
Are you change very quickly the plate of work ?
Are you change very quickly the tooling in the plate of work ?
Big flexibility and simple tooling.
Caractéristiques :
Power maxi 12 tonnes.
Section maxi tube 80 x 80 mm.
Punching with or without déformations.
Length of the machine de 4, 6 or 7 m.
|
|
Descriptive :
CNC machine with 2 axis.
Automatic with manuel front loading.
The machine can be equipped with a plate of work incorporating punching and/or cutting.
Punch on all 4 sides of the tube.
Fast change tooling.
Caractéristiques :
Power maxi 12 tonnes.
Section maxi tube 80 x 80 mm.
Punching with or without déformations.
Length of themachine de 1 m to 7 m.
|
|
QUICK AND ADJUSTABLE NEW FEATURE HYDRAULIC DIE-CUTTING PRESS PI85
NEW DEVELOPMENTS IN THE LOCKSMITH'S MARKET
The PI85 hydraulic press is specifically designed for die-cutting tubes for the various cylinder locks available on the market, covering more than 90% of the models.
It permits the simultaneous cutting of the mechanism box hole with those for the latch and deadbolt. It is also possible to make the latch and deadbolt cuts independently in order to vary the distance between them.
The PI85 Incorporates a system with a scale In millimetres that controls the distance between the mechanism box and the latch and deadbolt from 18 to 37 mm approximately.
A distance between axles of 85 mm. Adjustable entrance points of 20, 25, 30, 35 mm.
MECHANISM BOX
Adjustable mechanism box length.
The mechanism box is always on the side and of 35,40,50 mm.
Approximate time taken to cut out the mechanism box slot is 58
seconds.
|
|
HEADER TUBE PUNCHING MACHINE :
The Header Tube Punching Machine is hydraulically operated and is suitable for punching holes in copper tubes. The center distance of the holes is 25.4mm. Each hole is punched by pressing the button located on the carriage. After every punching stroke, air is blown through the mandrel to blow out the punched blank. The tube clamp can be rotated to punch holes at different angular positions. The carriage houses the tube clamping assembly and this carriage is locked in position by a mechanical arrangement during the punching operation.
|
|
| ... products without technical information |
| |
FormMaster: Tube Endforming Machines And Cutting Machinery
AddisonMckee manufactures a comprehensive range of tube endforming and cutting machinery suitable for a wide variety of applications. From simple expansion and reduction process tube endforming machine models, to our tube sizing equipment, blade parting machines and our versatile multi-hit ram formers, all of our FormMaster Series (FM) machines are extremely well-built, robust and easy-to-operate, with proven reliability over many years in some of the most demanding production environments throughout the world.
All FM tube endforming machines are available in larger or smaller capacity models with single or multiple heads. Additionally, all of our FM machines can be supplied as stand-alone production units or fully integrated into manufacturing cells with our bending machinery and other process equipment.
|
|
Tube end forming & machining
Machine with four working stations, either fixed or rotary, suitable for the following operations:
* End forming, only
* Machining, facing, rolling, swaging and trimming, minimising finishing operations with a two-speed additional rotary device.
* Automatic "head-tail" end-forming cycle with auto loader
Automatic loading and unloading devices increase quality and consistency.
The DNC control unit programmes the two axes of the machine for maximum efficiency without requiring manual adjustments.
|
|
|
|
|
|
STERN 25 IMS is a real work station for metal tube forming.
Thanks to the 15 different tools that can be fitted, this end forming machine gives the possibility, in the same work cycle, to flare, reduce, end-form, roll-form, face, chamfer, close and thread tubes up to maximum diameter 30 mm.
STERN 25 IMS has 3 controlled axis and a double vice closing system: this is made for stopping also particular kind of tubes, with a big diameter, and allowes to open one or both jaws.
Because of its ease of use, this machine doesn’t require a highly trained operator: so it is perfectly suited even to the most different productive conditions.
Like other Pedrazzoli end forming machines, the STERN 25 IMS too has the IMS control, developed by our R&D Department. The IMS software allows to control all the achievable functions (represented in a graphic way) and carries out automatic optimisation of the work cycles reducing production times to minimum.
This machine can be equipped with automatic loader, two-hand push-button controls with mushroom emergency button and clamping vice pre-closing device.
|
|
| ... products without technical information |
| |
|
|