|
|
BIOSANE T 212 has been designed in order to answer all extreme
needs: non-measurable flash point, ultra fast evaporation speed,
solvency power meeting all requirements, compatibility with most
of the substrates.
BIOSANE T 212 complies with standard : AIR 0011 certificate N°072
(aeronautics aptitude).
The flash point of BIOSANE T 212 is not measurable, its evaporation
speed is 10 mn and its solvency power is 64 (KB index).
|
|
MV 200 is a multi purpose solvent with short drying time.
It can be used as metallic and plastic parts degreaser, ink remover in printed graphic arts, adhesives, glues and resins remover, surface preparation before gluing or painting, brake parts cleaner, electrical instruments cleaner.
|
|
Degreaser free from VOC, odourless, compatible with the majority of supports, biodegradable and with a high flash point.
BIOSANE BIO 2050 allows to be free from reglementation constraint linked to the use of degreasers (ATEX, VOC, impact on the environment).
This product, while allowing a very high efficiency level, preserves the users from every nocivity or danger.
|
|
Water-based biodegradable formula
Removes tough, stubborn stains
& soils such as grease, oil,
sludge, soot, ink, coffee, and more
Does not contain chlorinated or
petroleum solvents, bleach,
ammonia, abrasives or butyl
Contains a corrosion inhibitor
to help prevent flash rusting
Super industrial-strength
Nonflammable
Safe on all surfaces
|
|
Clean and degreases all the elements of brakes and clutch. Eliminate quickly oils, greases, liquid of brakes, tar, bituminizes and other deposits of surface.
Net volume: 500 ml
|
|
ThreeBond 2706 is a heavy-duty degreasing cleaner in aerosol form. It is for use in cleaning many surfaces, such as paint surfaces, bonding surfaces, and sealing surfaces, and those of mechanical parts. It contains no chlorofluorocarbons (CFCs), which are harmful to the environment. It is not subjected to the Organic Solvent Intoxication Prevention Regulations of Japan.
·Easily and quickly removes rust-inhibiting oil, grease, machining oil, and other materials, even from narrow gaps, by the combined effects of the chemical cleaner and the pressure of the gas emerging from the can.
·Has minimal effect on rubber and plastic, and does not corrode metal.
·Is safe to use, because it contains no CFCs. It is not subjected to the Organic Solvent Intoxication Prevention Regulations in the Industrial Safety and Health Law of Japan or by the fire safety regulations.
|
|
Scope of application
Machine elements
Bed plates
Cleanings and maintenance
Hygiene and safety
Products: fluids and actors of surface
Solvents
Degreasers
Detergents
Rust removers
Fluids of protector
Absorbents
Soaps
Products of hygiene
|
|
BIOSANE T 222 is a technical fluid of degreasing, ultra-pure, whose
physicochemical characteristics are directly comparable to chlorinated
solvents. Moreover, it solves the disadvantages in the field of toxicology
and environment.
SUBSTITUTE TO CHLORINATED SOLVENTS
GUARANTEED WITHOUT HCFC 141 B, FREE FROM CHLORINE
GUARANTEED WITHOUT GLYCOL ETHER
EVAPORATION SPEED ULTRA-FAST
HIGH SOLVENCY POWER
COMPATIBLE WITH THE MAJORITY OF PLASTIC MATERIALS
STRONG CAPACITY OF DECANTATION
For more information, please consult www.mmcc.fr
|
|
|
|
|
|
BIOSANE T 3000 is a degreasing fluid compatible with all types of materials. Elimination of oils and greases with mineral or synthetic bases.
Cleaning of machining fluids by removal of chips or deformation.
The BIOSANE T 3000 does not release any VOC and is not classified in the VOC
category. Its use is thus not forced by lawful limits of vapor emissions (channeled or diffuse). It thus offers an excellent alternative to many volatile degreasers particularly in the case of installation of a Diagram Emission Control.
BIOSANE T 3000 is economical: it removes diffuse emissions and useless overconsumption due to evaporation losses. BIOSANE T 3000 is a very safe
degreasing fluid. Its very high flash point guarantees that no flammable vapor is
released at ambient temperature. It thus eliminates the risk from formation of explosive atmospheres. Usable by all traditional cold processes (steeping, steeping under ultrasounds, rag, sprinkling with low pressure), it also allows hot degreasing until 70°C without flammable vapor emissions. Its flash point being definitely higher than 55°C, the BIOSANE T 3000 is also adapted to closed cleaning machines of A3 class.
More information on www.mmcc.fr
|
|
CLEAN-setral-AN/U - Multi-purpose high-performance cleaner for industry and work-shops.
For residue-free basic cleaning prior to relubrication of maschine components. Removal of grease, oil, resin, dirt and remains of sealings. Product should not be used under electric potential. Product should evaporate completely, as otherwise fire risk exists.
Advantages:
* Cleans quickly and thoroughly
* Leaves no residue
* Economical in use
* Free from chlorinated hydrocarbons
|
|
|
LubTool 4000 is a highly effective cleaning spray by the combination of several cleaning-active active substances unusually effectively against most diverse contamination proceeds. LubTool 4000 for the distance of verharzten oil and fat remainders is particularly suitable. Use they LubToo also for problems with lacquers, colors and coloured pencil markings like also general contamination at engines and machines.
|
|
- Electra Clean Spray: Ideal for electrical and electronic fine parts. Cleans and degreases delicate mechanisms. Removes light greases, oils, dirt and organic soils. Quick evaporation. Safe to use on most surfaces. Non conductive. Fast penetration. Superior wetting action. No rinsing and no residue. NSF K2 Registered
- Foam Cleaner Spray: Foaming action - pleasant and economical to use. Ideal for all non-porous surfaces. NSF A1 Registered
- Industrial Cleaner Rapid Dry: Multi purpose cleaner. Fast evaporation. Safe on metals, most plastics and paints
- Heavy Duty Cleaner: Lifts grease and grime so that the resulting residue can be easily removed.
|
|
Heavy-duty performance
Power blast spray
Nonflammable
Nonchlorinated
Nonconductive
Fast Evaporating
No rinsing
No residue
Safe on Most metals (as per MIL-T-81533A)
NSF registered category C1
|
|
|
|
|
|
WEICON TFT/LCD Screen-Cleaner
The ideal product for the cleaning and care even of sensitive plastic and glass surfaces. It removes dirt, dust, grease and nicotine and cleans carefully without leaving residues.
WEICON Brake Cleaner
WEICON Brake Cleaner is a multi-purpose cleaner especially for the automotive sector. It quickly cleans and degreases metals, glass, ceramics and many plastics without leaving residues.
WEICON Burner Cleaner
WEICON Burner Cleaner is especially formulated to remove grease, oil, soot and other dirt accumulations from burner parts. WEICON Burner Cleaner leaves no residues.
WEICON Cleaner Spray S
WEICON Cleaner Spray S degreases and cleans all metals, ceramics, glass and most plastics.WEICON Cleaner Spray S evaporates quickly and, unlike thinners, cleans without leaving residues.
WEICON Compressed-Air Spray
WEICON Compressed-Air Spray is used where traditional methods of dust clean-up would not work, as on parts of difficult access. It allows to dedust corners and sensible surfaces in a dry and contact-free way.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :