|
|
|
The UGC Vibrating Densitometer accurately measures the density of a flowing fluid at actual operating conditions. This Densitometer was primarily developed for extremely accurate fluid metering (custody transfer), plus many other applications, such as pipeline interface detection, blending, process control, etc. The frequency output of the Vibrating Densitometer is compatible with most flow computers.
|
|
The contactless and continuos measurement of the density of liquids or bulk material is requested in even more than the following applications:
Concentration measurement of acid, alkali, saline solution and suspension
Crystallisation and polymerisation monitoring
Determination of the solid matter content in slurries, in flue gas desulphurisation suspensions, in aluminium production and in mining
Measurement of the bulk density in washing powder and clinker
|
|
|
|
|
|
The Thermo Scientific range of Sarasota liquid (gas) density meters measures density or density related variables within the oil and gas, petrochemical, chemical, food and beverage and general process industries. These high accuracy online continuous meters provide key information for process monitoring and control, quality control, product interface detection and custody transfer applications.
The Sarasota FD910 Industrial Density Meter is designed for high accuracy measurement of general process liquids and slurries, giving continuous online density or density related measurement with straight-through flow. Built to be insensitive to plant/pipeline vibrations, it has a wide operating temperature span and options to suit an extensive range of applications.
The Sarasota FD950 Chemical Density Meter is designed for the high accuracy measurement of aggressive liquids and slurries. It provides continuous online density measurement, providing straight-through flow in a compact and lightweight design. Accurate to 0.1kg/m3, it has a wide operational density range of 0 to 2100kg/m3.
The Sarasota FD960 Fiscal/Custody Transfer Density Meter is designed for high accuracy measurement of high value process liquids and slurries. Using straight-through flow, the Sarasota FD960 provides continuous online density measurement. It has a wide operating temperature span, low pressure drop and a high flow rate capability and is suitable for use in hazardous areas.
|
|
Microwave measurement for the sugar industry
An important parameter for the sugar production is the concentration of the sugar massecuite. Measurement of the dry substance content, usually represented as Brix is absolutely essential in order to optimize, control and improve the sugar quality.
Based on experience in process control, BERTHOLD TECHNOLOGIES provides products, which exactly match the instrument needs and expectations of customers producing sugar.
We offer specially designed microwave sensors for measurements in product pipelines, dissolved sugar containers, crystallizers and at other process locations. The Micro-Polar Brix provides accurate, reliable online concentration measurements of the sugar magma over the entire process.
|
|
Density Meter Series DIMF 2.0
Swagelok-screw joints, flange DN 15 PN 40, milk threads according to DIN 11851 PN 10
accuracy ± 0,2 kg/m³
reproducibility 0,05 kg/m³
operating temperature according to design -40°C to 210°C Accessoires
electronical transmitter
pre-amplifire
strainer
gas separator
processing peripherals
Density Meter Series DIMF 2.1
flange DN 25 / 50 PN 40
accuracy ± 0,2 kg/m³
reproducibility 0,05 kg/m³
operating temperature according to design -40°C to 150°C
|
|
|
The DENSITRAK® Model D625 liquid density meter utilizes the spring mass principle for measuring the fluid density. A portion of the "u" tube is energized to vibrate at its natural resonant frequency by using an electrical feedback driving system. A change in the vibrating mass, (as a result of change in the fluid density) shifts the resonant frequency. A CSI SPUD signal processing unit for density uses temperature, pressure and the shift in frequency to determine the density of the measured fluid.
|
|
|
|
|
|
PROCESS LIQUID IN-LINE DENSITY METERS DC-50 SERIES
LEMIS process DC-50 series of process in-line meters has been carefully engineered for continuous measurement of liquid density to fit large range of applications.
LEMIS process use streamlined resonant tube which is washed on either side by measured liquid. The oscillation period of the vibrating tube and its frequency characteristics depend on behaviour of the measured liquid allowing simultaneous and accurate direct measurement of density and concentration.
Large offer of factory pre-built installation packs allows quick and simple field installation with minimal pipeline disturbance or process downtime. The meter supplied with rigorous factory calibration for density. The DC-50 series proves high accuracy and long-term calibration stability insensitive to mounting position, plant vibration, process flow rate and pressure variations.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
Applications
: In-line density measurement of liquids or multiphase-mixtures
Special features:
Reliability
Robust construction with magnetic transmission of measured values.
Can be used in hazardous areas.
No by-pass required
Wide and clear scale
|
|
General description :
DensiCheck
Controlling product quality and specification is increasingly important to process managers nowadays. Optimum cost control, costly rework and keeping process within tolerance limits are the common headaches for today's managers. Meeting these demands is easy with DensiCheck. In-line concentration measurement is the key. DensiCheck offers continuous process measurement at a very economic price.
Our DensiCheck systems are being used to measure concentration in many different aqueous solutions, including:
* Acetone
* Beer
* Chromic Acid
* Ethylene Chloride
* Hydrochloride Acid
* Hydrogen Peroxide
* Methanol
* Phosphoric Acid
* Sodium Hydroxide
* Sucrose
* Ammonium Hydroxide
* Calcium Hydroxide
* Ethanol
* Ferric Chloride
* Hydrofluoric Acid
* Isopropyl Alcohol
* Nitric Acid
* Sodium Chloride
* Soft Drinks
* Sulphuric Acid
|
|
Eclipse Air Heat Burners are line type burners ideal for generating large volumes of clean, hot air. Applications include ovens, dryers, fume incinerators, and similar industrial equipment.
The "AH" models feature an integral combustion air blower mounted on the back of the burner’s steel case. By supplying the correct air volume and pressure to the burner, the blower allows stable operation over a wide range of duct velocities without installing a profile plate around the burner.
|
|
|
These burners provide close coupling of radiant heat sources for use in "line" arrangements where relatively "light" heating jobs are to be performed. Designed essentially for heating moving webs, line burners also find frequent application in ovens, as well as in heating stationary objects. The 500 Series is available in a variety of cup configurations to permit several self-piloting geometric arrangements. The small 200 Series and large 700 Series, however, are currently available for straightline use only.
|
|
The Eclipse Minnox burner utilizes a premixed gas/air mixture with excess air; the resulting low flame temperature of 1200°C (2200°F) produces extremely low NOx discharge from the burner head. A modular designed gas/air mixer is adapted to the burner manifold in various configurations.
The flame is protected by a stainless steel shroud which insures good combustion without being influenced by process air. Burner capacities are available from 125 to 4000 kW (430,000 to 13.6 million Btu/hr.); higher capacities can be designed for special applications.
|
|
MAXON CROSSFIRE® Low NOx Burners comply to the world's toughest air quality standards for NOx and CO by cleanly combusting gaseous fuels. CROSSFIRE® Burners are nozzle-mixing, modular line burners designed for a variety of fresh and re-circulated industrial air process heating applications. The low NOx burner is available in straight, grid, and insert cartridge sections which are used to spread heat across your duct for very uniform temperature distributions.
The CROSSFIRE® Burner can be designed within a system to allow for up to 2,500,000 BTU/hr/ft while producing extremely low emissions of both NOx and CO. You can combine CROSSFIRE® Low NOx Burners with Smartfire® Intelligent Combustion Controls for optimal control of emissions and efficiency.
|
|
|
MAXON Series "NP" and "RG" AIRFLO® Industrial Burners provide clean, direct fired air heating to optimize process air heating efficiency. The modular natural gas burners install easily with custom built patterns to fit your duct. NP and RG burners burn cleanly with most gaseous fuels and offer high heat releases per foot with wide turndown ratios.
|
|
|
MAXON APX® Natural Gas Burners are packaged nozzle mixing line burners designed for fresh or low temperature re-circulated air heating applications. The APX® Industrial Burner is a value engineered design utilizing a single aluminum extrusion for both its air and fuel manifolds. Its single-piece, joint-less body design provides standard straight gas burners up to 40 feet, H-shaped burners, and grid shaped burners engineered to your specification. APX® burner construction provides years of maintenance free operation and lower cost of ownership than any other alternative.
|
|
Slopes ASK are gas-burners flame car stabilized and high speed of exit. They can function in a room temperature of 550°C.
Characteristics:
POWER:
Total ventilation - 30 kw with the linear meter (for a pressure of mixture of 15 mm E.C. for mixer with puffed up or mixing air atmospheric under 1 bar).
FOOD GAS:
- Gas average pressure 0,3 to 2 bars (atmospheric mixer)
- Gas low pressure (mixing with puffed up air)
- All gases
|
|
| ... products without technical information |
| |
Composite tube manufacturing lines
Aluminum-plastic composite tubes are constantly being used in new applications. The reasons are quick installation, corrosion-resistance, and last but not least, lower costs. Hot /cold water pipes and chemical tubes are but a few of the many possible applications. DREISTERN cooperates with the leading extrusion manufacturer MAILLEFER Ecublens (CH) and supplies turn-key machines for very high productivity.
|
|
Turn-key solutions - Solartechnology
MiniTec offers automatic assemblylines for this very sophisticated process including industrial images processing, automatic test stations, framing stations and many approved solutions for damage free module handling.
|
|
Cutting machines
Automatique cross cutter ZA 430 the convenient cross cutter for paper, cardboard and film rolls, with a slitting system for film as an option. The number and length of the sheets can be preset. Operating instructions in plain language make handling easy.
|
|
Hugo Beck supplies inserting machines for collating magazines and catalogues with one and/or several loose inserts of various kinds in the output range up to 15.000 cycles/hour.
Selective feeding and identification are also included in the delivery scope as is the colation of stacks.
|
|
CutMaster F 2200 ST
Folio sheeter
tandem piler version ST
CutMaster F 2200 S
Folio sheeter
single piler version S
Applications:
Folio-size sheeting - paper
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
