|
|
The laser distance-meter LMC-J-0310 is robustly engineered especially for industrial applications. It works at distances up to 3000 m. Up to 300m and more (depending on target reflectivity) no special reflector is needed. Measuring values are provided continuously via the integrated RS422/RS232 or analogue 4..20 mA interfaces. As option, ProfiBus and SSI interface is available. In this way the device is providing position and velocity information during the production process.
The LMC-J-0310 can be used in distance and speed measurement mode. All measuring parameters are adjustable. The high measuring speed allows the distance measurement of extremely fast moving objects.
The operation principle of the LMC-J-0310 is time delay measurement, the measuring time is adjustable between 0,5 and 1000 ms (a special version with 0,1ms is also available). Within a fraction of second one distance measurement is obtained by means of several hundreds or thousands of individual measures.
|
|
|
|
|
|
If you will measure distances, profiles, form, surface, thickness online fast, non contactless and with a high precision, Eltrotec sensors offers a wide range of laser measure sensors for industrial process measurement.
More than 20 years experience quarantees the knowledge for a lot of different applications customers had to do every day (All the laser beam has protection class 2).
Several sensor types are available to solve specific problems as there are:
a.) shiny or glossy surfaces
b.) black, blank rubber and dark surfaces
c.) surfaces in variation of black and white (colours)
d.) hot metals where you need bigger distances and high temp. sensor.
e.) distance measuring where the machine creates vibration, shock or magnetic fields
range: 5, 10, 20, 50, 100, 200 mm (250 mm is shock protected)
resolution: 0,5 µm - 40 µm
interface: 4-20mA / 1-5VDC
RS232 included
princip: CCD-Chip with integrated signal prozessor
frequency: 1000Hz
(best results with this sensor if there are fast changing interfaces in reflection of surface)
Spot diameter: typ. 100-200 µm depends on distance
|
|
The RACO path-sensory system has been specially designed for exactly positioning and switching off electro-magnetic actuators in the final position. Not only is the position ascertained unconventionally by electro-magnetic means (e.g., gear-shifting mechanism) while doing so but it will also be determined via a close-coupled magnetic field without any movement.
The EPS consists of a printed circuit board and a magnetic holder with the magnet. The electronic positioning sensor (EPS) is integrated into the device%u2019s supplementary casing (A) on the motor shaft's end of the servo-motor or in the device's supplementary box (D) on the coupling casing. The installation, commissioning (starting up), maintenance (servicing) and upgrading is simplified in comparison with a conventional design that has mechanical limit switches and a shift transmission which must be adjusted individually.
|
|
Magnetic Reed Switches
Magnetic reed switches are available on nearly all air cylinders offered with Ultramation Linear Thrusters. Reed switches are actuated by the close proximity of a magnet which is included within the cylinder as part of the piston assembly. A reed switch contains a normally open sealed reed that closes or makes in the presence of a magnetic field. The reed switch returns to the normally open state once the magnetic field is removed. Reed switches, both with and without LED position indicators, are used in the vast majority of applications where the magnetic piston briefly comes to rest at each end of the stroke.
|
|
MZCK 03
general data
type magneto-resistive
version C-slots
nominal operation point 28 Gauss
electrical data
switching frequency < 200 kHz
response time / release time < 0,0025 ms
output current < 200 mA
voltage supply range +Vs 5 ... 30 VDC
mechanical data
cable output lateral
depth 9 mm
width / diameter 3,7 mm
mbient conditions
operating temperature -10 ... 70 °C
|
|
One sensor, two adjustable switching points
Saves space, time and money
Simple alignment and definition of the switching point thanks to teach process
Easy mounting with only half the cabling work
Sensor sunk into the T-slot thanks to compact design
Applications: end position query to short hoist cylinders or intermediate position detection, e.g., for reducing piston speed
|
|
General description :
Industrial-grade, Hall effect geartooth speed sensor with adjustable stainless steel housing.
- Sense Motion of Ferrous Geartooth Targets
- Near-Zero Speed Sensing Capability
- Immune from Hostile Environments
- Not Subject to Rotational Orientation
- High-Speed Capability
- Sinking (Open Collector) Output
- Reverse Battery Protection to -24Vdc
- Wide Operating and Storage Temperature Range
- M12 Integral Connector Meets IEC60947 - 5 - 2
- Meet all IEC (International Electrotechnical Commission) Requirements for Heavy Industrial Environments, Assuring Immunity from:
* Electrostatic Discharge
* Electrical Transients
* Radiated Electric Field
* Conducted Energy
* Magnetic Field Energy
|
|
M-190 and M-190P
MT-190W and MT-190P1-99,999 RPM. Self-powered gear sensor. M-190W Magnetic Sensor and M190P Magnetic Sensor are very popular magnetic sensors commonly used with 60 tooth 20 pitch gears. The sensors mount with 0.005 inches (0.127mm) of a 0.1 inch (2.5mm) target. These sensors require no power from our display modules as they self-generate an AC signal.
|
|
MPS4452S
Contact Form / Style: (A) Normally Open
Switching Voltage: 1500 Vac
Switching Current: 0.5A
Switching Capacity: 10.0VA Max.
Contact Resistance: 150 mOhms Max.
Switching Distance: 10.0mm Min. (0.394in)
Size: Length: 20.0mm (0.787in)
Height: 6.0mm (0.236in)
Width: 14.0mm (0.551in)
Leadwire Length: 300mm (11.811in)
|
|
|
Designed to make installation easier, GE Security Industrial position sensors have earned their reputation for quality. They are built for durability and dependability. Most are conservatively rated at 100,000 cycles under full load, and 10,000,000 cycles under dry circuit. Every reed connection is hand soldered and the reeds in all models are environmentally sealed. Like the GuardSwitch™ safety interlock switches, our position sensors are tested before they leave the factory - 100% of the time.
|
|
The P3000 Series magnetic proximity sensor is a non-contact, solid state device that is magnetically actuated for a variety of proximity applications. The P3000 Series magnetic proximity sensors are designed to provide tight tolerance magnetic operating points. This ensures reliable and repeatable limit switching in both linear and angular position sensor applications. It has a rugged, thermoplastic housing and is ideally suited for many industrial environments. These products require a permanent magnet target, which offers the customer long range sensing and precise limit switching.
Features:
- Digital Output Signal
- 4-24 VDC Operation Range
- Current Sinking Output
- 20ma Continuous Operation
- Reverse Polarity Protection
- 0 to 100 kHz Operation
- Temperature Compensated
- Operation from - 40°C to 125°C
- Rugged, thermoplastic housing
|
|
series D101
Threaded Hall Magnetic Sensor M10 x 0.75 Nickel-brass body sensor
series D085
Cylindrical Magnetic Sensor diam. 8 x 1 Nickel-brass body sensor
|
|
general data
sensor type Hall sensor
air gap for module 1 mm (module 1), 2,5 mm (module 3)
gear material ferromagnetic
electrical data
switching frequency < 20 kHz
voltage supply range +Vs 8 ... 28 VDC
current consumption max 20 mA
output A PNP
output current < 30 mA
voltage drop Vd < 3 VDC
short circuit protection yes
reverse polarity protection yes
mechanical data
type cylindrical
housing material stainless steel
dimension 12 mm
housing length 60 mm
installation aid keyway
connection types cable, 2 m
|
|
General description :
Solid State, magnetic proximity sensors in adjustable threaded housing.
- Immune to Hostile Environments
- High-Speed Capability
- Reverse Battery Protection to -24Vdc
- Sinking (open collector) output
- MP100105 and MP100106 use Omnipolar GMR Sensing Element for Extra Wide Airgap
- South Pole Sensitive (except MP100105 and MP100106)
- M12 Integral Connector Meets IEC 60947-5-2
- Internal circuit protection allows sensor to meet all IEC requirements for Heavy Industrial. Environments,ensuring immunity from:
* Electrostatic Discharge
* Electrical Transients
* Radiated Electric Field
* Conducted Energy
* Magnetic Field Energy
- Housing: stainless steel
- Cable Insulation Material: Polyolefin
- Cabled versions: -40C to +125C operate & storage temp
- Connectorized versions: -40C to 105C operate & storage temp
|
|
|
SICK offers a comprehensive portfolio of magnetic proximity sensors in cylindrical (MM) and square (MQ) configurations. The MM sensors are available with standard sensing ranges and, in the Advanced series, with extended sensing ranges. This means that the possibility to use smaller magnets will open completely new applications.The Namur version of the MM sensors completes the series.
|
|
|
The industry's most complete line of contact and non-contact products. GE Security Industrial safety interlock switches are used to detect the opening of guards-including doors, gates and/or removable covers-that prevent access to dangerous parts of a machine, and to help deter tampering with the guards or the internal machine controls. As with all GE Security Industrial 300-BT products, the safety interlock switches are in full compliance with the most current and required standards. These include IMQ, CE, VDE, UL, CSA, IEC, EN and Semi S2 standards.
|
|
The KMT32B is a magnetic field sensor based on the anisotropic magnetoresistance effect, i.e. it is sensing the magnetic field direction independently on the magnetic field strength for applied field strengths H>25 kA/m. The sensor contains two parallel supplied Wheatstone bridges, which enclose a sensitive angle of 45 degrees. A rotating magnetic field in the surface parallel to the chip (x-y plane) will deliver two independent sinusoidal output signals.
Features:
- Contactless angular position
- Ideal for harsh environments due to magnetic sensing
- Design optimized linearity
- Low Cost
- High Accuracy
- High rotational speed up to 30,000 rpm
- Extended operating temperature range (-40 °C to +150 °C)
- Low Power
- RoHS compliant (lead free)
- SMD package
|
|
Optical Probes for thickness and distance measurements
The measurement range of the chromatic optical probes reaches frome a few hundreds of microns up to millimeters allowing you the perfect tune to your applications
High numerical aperture and small spot diameter are ideal for the most uses in metrology.
The interferometric optical probes show off by their compact construction and serve thickness measurements of transparent thin films from 2µm - 250µm (optical thickness).
|
|
|
One of the first SMT optical proximity sensors deliver a digital output signal, OSRAM Opto Semiconductors' SFH 7741 Short Range Proximity Sensor is designed for detection ranges of up to 20 mm. With its very small size and low power consumption, it is perfect for proximity sensing and switching applications in battery-powered consumer devices like mobile phones and digital cameras.
|
|
|
1-250,000 RPM. Extremely versatile and able to work over long distances (up to 25 feet). The ROLS-W (tinned wire termination) and ROLS-P (1/8" phone plug termination) are threaded stainless steel remote optical sensors with a visible red laser light source. All these sensors have the "on-target" green LED indicator.
|
|
The most versatile and popular sensors we make. The ROS-W (tinned wire termination) and ROS-P (1/8" phone plug termination) are threaded stainless steel remote optical sensors with a visible red LED light source. All these sensors have the "on-target" green LED indicator.
|
|
The detection area of the OP-08C consists of 10 independent areas. By rotating a spherical lens, the size of the area can be easily adjusted between standard size and large size.
As the sensor is very small, it can be aesthetically fitted into the entrance surround. It can be embedded into a transom or ceiling up to 4m.
Use of proprietary sensors and microcontrollers reduce faulty movement due to rain, snow or insects.
|
|
Electro-Sensors Model 608-1 is an 8mm shielded proximity sensor.
The 608-1 is an active digital sensing device that generates one pulse per pass of an actuating target within its sensing field. No direct contact with the target material is necessary. Each sensor is entirely solid state with no moving parts to wear out. This provides for long life with little or no maintenance.
The wide range of supply voltages to the 600 Series permits them to be directly interfaced with low voltage solid state controls, such as programmable controllers and electromechanical relay loads. All sensors are polyurethane or epoxy encapsulated and are provided complete with mounting bracket, jam nuts, and 6 ft. of cable.
Features:
- Non-Contact Sensing
- Solid State-No Moving Parts
- Durable Corrosion Resistant Metal Housings
- High Speed Repeatability
- Short-Circuit and Reverse Polarity Protection
- Outputs CMOS Compatible
- Full Output Signal Down to Zero Hz
- LED Operation Indicator on all Models
|
|
59050 PCB Mount
A small PCB mounting reed sensor 22.86mm x 6.73mm x 4.57mm(0.900" x 0.265" x 0.180mm) with a choice of normally open, normally closed or change over contacts. Moulded stand-offs to allow board washing. Customer defined sensitivity. UL recognised and capable of switching up to 265Vac/300Vdc at 10VA. Range of sensitivity options. Well suited to position and limit sensing, security, door and window alarm systems. Matching actuator 57050-000 available
|
|
The reed switch is an electrical switch operated by an applied magnetic field. It was invented at Bell Telephone Laboratories in 1936 by W. B. Elwood. It consists of a pair of contacts on ferrous metal reeds in a hermetically sealed glass envelope. The contacts may be normally open, closing when a magnetic field is present, or normally closed and opening when a magnetic field is applied.
A magnetic field (such as from an energized coil around the glass tube or a permanent magnet moved towards it) will cause the contacts to pull together, thus completing an electrical circuit. The stiffness of the reeds causes them to separate, and open the circuit, upon removal of the magnetic field. A more complicated configuration contains a nonferrous normally closed contact that opens when the ferrous normally open contact closes. Good electrical contact is assured by plating a thin layer of precious metal over the flat contact portions of the reeds.
|
|
The Optex OA-Fusion I/II/III are suited for the retrofit market. You can upgrade doors that were installed years ago to the safety level of today at reasonable cost by fitting the OA-Fusion I/II/III behind the existing activation sensor.
The Optex OA-Fusion is an active infrared safety sensor tested and approved by the German test organization TÜV and in compliance with DIN 18650 and the preliminary European norm prEN 12650.
The Optex OA-Fusion I/II/III are equipped with test outputs suitable for almost every automatic door, by choosing the right dipswitch setting.
|
|
Sensors are elementary components of automation. Increasingly precise and wear-free sensors with more and more reliable measurements enable a continuous improvement of the production process. Here, no-touch sensors working with an almost unlimited lifetime are playing a major role. In distance measuring, different measuring methods depending on the measuring range have established themselves. For the medium range between a few centimetres and several metres optical and ultrasonic systems are mainly used. Ultrasonic distance sensors are used in harsh, industrial environments, because they are independent of the material and the colour of the object to be measured, they cannot be disturbed by light, dust and fog, and they work very precisely and linearly with background suppression.
ELTROTEC Sensor GmbH ultrasonics has more than 20 years of experience in addition to the higher-end laser distance sensors with more accuracy, speed and precision. Trust our products for your application in:
|
|
Light and sound are two natural phenomena which let every living being recognise their environment without physical contact and over widely varying distances. Likewise, industrial processes require reliable information. SICK's ultrasonic sensors detect objects and measure distances with high accuracy
Further advantages:
- the outstanding background suppression and the reliable detection of objects
- almost independently of their appearance.
the application determines the output - binary or analogue - according to your wish.
|
|
Detection, the measurement and the removal of not easily detectable objects are carried out in a sure and reliable way by means of our detectors with ultrasounds until a distance of 3 meters with a high and constant resolution, in digital and analogical mode. They tolerate clogging, dust and moisture. They are especially ready to detect transparent, solid objects and in the form of granules. The electronic device Teach-in you makes it possible to adjust your detectors in a correct way in a turn of hand. The solution when the other techniques do not give satisfaction.
- Recognizes also difficult surfaces
- High resolution
- fine Beam with ultrasounds
- Small cases
|
|
|
Ultrasonic waves are used to enable stable detection of transparent objects, such as transparent films, glass bottles, plastic bottles, and plate glass, using Through-beam or Reflective Sensors.
|
|
|
|
