Detectors

Handheld gas monitors are suitable for indoor, industrial and outdoor air quality monitoring. Compatible with over 30 different interchangeable sensor heads, one monitor can be used to measure multiple gases and concentrations. Interchangeable ...

Traditionally, the amount of dissolved carbon dioxide is measured using a methodology commonly called "manual shaking" (aka piercing device) where a container with pierced hole is shaken vigorously in a metal frame. It requires strenuous ...

ATi’s A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, this ...

ATI's F12iS Toxic Gas Detector is designed to measure toxic gases and oxygen in hazardous locations requiring an Intrinsically Safe (IS) device. The F12/D, a non-IS version, is also available for non-hazardous locations. ...

The Model E12-15 IR Infrared Gas Detector is a rugged reliable microprocessor based intelligent gas detector. The E12-15 IR can be used to monitor from PPM levels to explosive levels of ammonia gas. ...

* Measurement of CO concentration in the ambient air * Test CO leakage from furnaces, water heaters, stoves * MWC-Value-Measurement (Maximum Workplace Concentration)

Voltage Sensor KEW 8309 Floating voltage can be measured *Floating voltage: phase to phase voltage not grounded Max. input voltage |AC 600Vrms(sin), 848.4Vpeak Input system |Differential input (can measure floating voltage) Output ...

Non-Contact Safety Phase Indicator KEW 8035 • New technology permits safe testing, without the need of direct contact between probes and live wires. • The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm. • Phase ...

... Starting at $395, the detector provides protection from H2S, SO2, Cl2, CO, HCN, NO2, O2, NH3 or PH3. Ultra-compact and durable, the GasAlert Extreme with an IP66/67 rating offers the most advanced features of any single ...

BW Technologies by Honeywell has raised the bar for maintenance-free detection with the new GasAlertClip Extreme. Providing two years of protection from H2S, SO2, CO or O2, the water-resistant GasAlertClip Extreme has a built-in concussion-proof ...

GasAlertMax XT II from BW Technologies by Honeywell GasAlertMax XT II is the four-gas personal monitor offering a smart, simple, economical way to compliance. Workers feel safe and incidents are minimized so everyone will be able to ...

- New generation ceramic tube photo-ionization detection (PID)technology - Patented filter unit , can operate properly under severe environment, such as high humidity, high salt mist and so on. - With built-in multiple response factors, ...

- Vacuum ceramic tube photo-ionization detection (PID)technology - Patented filter unit , can operate properly under severe environment, such as high humidity, high salt mist and so on - With built-in multiple response factors, easy ...

- Vacuum ceramic tube photo-ionization detection (PID)technology - Patented filter unit , can operate properly under severe environment, such as high humidity, high salt mist and so on - With built-in multiple response factors, easy ...

A motion detector, for orientable wall installation, with 140º detection angle and up to twelve metres frontal detection range when installed at two to three metres height. The ISIMAT detects invisible infrared from persons ...

A motion detector for surface installation with corner option using accessory supplied with the detector. 240º detection angle and up to twelve metres frontal and nine metres side detection range. Includes ...

NEW ORBIS “MOVICAM CR” MOTION SENSOR ORBIS TECNOLOGIA ELECTRICA, S.A. is introducing in the market the new MOVICAM CR Motion Sensor, which comes to complete the wide range of sensors they currently offer. Its goal is to merge the most ...

The TQC Low Voltage Pinhole detector enables the user to inspect various coatings on conductive substrates for small defects such as holidays and pinholes using the ‘wet sponge technique’. The grounding clamp is connected ...

A new sensing technology and toolset for chromatography More than just a GC detector, the SePdd is a scalable, Epd-based detector that works with our CPM platform for a full-feature, cost-effective complete ...

... highlights Powerful single wavelength EPD detector Our mini SePdd was designed for applications that require a single optical wavelength module. With this entry-level enhanced plasma discharge (Epd) detector, ...

Flame ionization detectors (FIDs) are required for a variety of applications, and there are many models on the market. With our 30 years of experience developing GC solutions, our premium eFID (enhanced flame ionization ...

UniPARK is the new CO / NO gas detection parking unit. It is supplied in a standard metal wall-mounted cabinet or in a 19-inch rack fitted with a PLC controlling a network of CO-NO sensors. Available with Modbus or 4-20mA sensors, it ...

The portable catharometer is a robust device for helium sniffing measurements. Particularly appreciated by operational teams during tests and qualifications, the PORTABLE CATHAROMETER is delivered in a rigid case with its accessories. ...

Oxygen trace detector for inerting. Self-contained unit with sampling pump. Digital display. Zero calibration via function key. 2-line monochrome display. Possibility of sampling from 60 bar network (option). Display ...

Allows touchless AC detection in range from 90 to 1000V • indicates live conductors • continuity buzzer • optic signalization of voltage presence by flashing LED (quite cycle) • voltage range: 90 ~ 1000VAC • frequency: 50/60Hz • ...

RAEM1-6 multi-channel detector was developed based on acoustic wave( acoustic emission) technology and Linux system, combined with SWAE software, it could effectively carry out acoustic emission nondestructive testing ...

RAEM1 detector was developed based on acoustic wave( acoustic emission) technology and Linux system, combined with SWAE software, it could effectively carry out acoustic emission nondestructive testing for most of the ...

... Communication failure between group equipment; Neutral angle (resulting current); Low voltage alarm of ultra capacitors; Loss detector, among others.

The TS200 medium voltage detector is a product designed to detect events that occur in medium voltage electrical networks, up to 34.5 kV. It is a system that monitors the distribution network voltage and current, indicating ...

The TS200 low voltage detector is a product designed to detect the absence/presence of voltage in electrical networks up to 380v phase to phase. It uses a system to read the voltage in the network, which detects the absence/presence ...

ECO209 is a continuous pH monitor suitable for constant monitoring of pH level of a given water or solution sample such as aquarium tank, ponds, hydroponics systems among others. It is easy to use, with simple maintenance features, ...

The ITEL is designed for use with the catalytic combustible sensor, electrochemical sensor, PID sensor and infrared sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART ...

The 6000-KD is designed for use with the catalytic combustible sensor. Features Industry standard linear 4-20mA output. RS-485(Modbus RTU) and relay output. HART output(option). Using a magnet wand for calibration ...

The 6000-KN is designed for use with the catalytic combustible sensor. Features Industry standard Linear 4-20mA output. mV output(option). CNS/CQST/CPA approved for hazardous area use. CE approved for RFI/EMC ...

Laser Gas Detector is based on Tunable Diode Laser Absorption Spectroscopy (TDLAS). The detector emits a special wavelength laser to the gas and demodulates the laser signal passing through the gas. Combined ...

The Handheld Laser Gas Detector is based on Tunable Diode Laser Absorption Spectroscopy (TDLAS). The detector emits a special wavelength laser to the gas and demodulates the laser signal passing through ...

The Remote Gas Detector is based on Tunable Diode Laser Absorption Spectroscopy (TDLAS). The detector emits a special wavelength laser to the gas and demodulates the laser signal passing through the gas. ...

GC-9780b Sulfur hexafluoride equipment discharge decomposition products portable helium ion detector using helium ionization gas chromatography principle,It can analyze 17 decomposition products of sulfur hexafluoride ...

Microwave detectors - Ceiling-mounted and tilt adjustable Ceiling mounted microwave sensors with adjustable head option. Ideal for long projection detection such as corridors. Up to 30m detection.

Auxitrol Weston specializes in the design and development of high quality nickel and platinum Resistance Temperature Detectors (RTDs), in standard and application specific configurations. We are one of the few manufacturers ...

NON-CONTACT CAN SENSOR SP7001, SP7002 Monitor CAN FD/CAN Signals Without a Sub-Harness Overview The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary ...

DIGITAL PHASE DETECTOR PD3259 Digital Phase Rotation Meter with Three-Phase Voltage Measurement Functionality Overview Hioki’s non-contact voltage detection and measurement technology places efficiency and safety ...

VOLTAGE DETECTOR 3481 Non-Metallic Contact Voltage Detector with LED Light Overview Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the ...

... inside the detector. TSV100 utilizes only electronic components, there aren’t any mechanical and electro-mechanical components. This improves detector’s durability. Galvanic isolation is achieved by ...

Play detector for vehicles over 3,5to. | Meets all current guidelines of the european directive 2014/45//EU Scope of Delivery: Hot galvanized left and right Testing plate Max. Axle load 16 to. low maintenance ...

AC voltage detector (non contact) with buzzer and LED Model SEFRAM12 - AC Voltage detector (V>100V AC) - No contact - Phase detector - Autotest - Hi sensitivity mode - ...

for use as UV-C monitoring system (displaying UV values in "W/m²", "mW/cm²" or "%") can be connected with - up to two D-SiC UV-sensors with digital interface - or one SiC-I UV-sensor with 4-20 mA signal output - or one SiC UV-sensor ...